Funny u say reluctant to change. Up here in Canada, majority of the equipment in the mining industry is Leica. Well started a new job fall 2018 at a mine. It used to be an open pit mine and now the company is after another ore body which will make it an underground mine. I was first tasked to upgrade the 15+ yr old survey equipment. Took some smooth talking but I will be getting all new Trimble gear . The PO was issued today for (2) S7 2" robo's, (1) SX10 and (1) R10 GPS :) . Life doesn't get any better than this . Keep up the vids, they are so much better and informative than the other out there.
@AngelSanchez-du8ze5 жыл бұрын
Why not go with TWO r10's, the sx10 and ONE s7, with extra dough get another data collector? You would get a higher return of survey work done with that as opposed to the equipment your going with......You can differential GPS onsite and still have flexibility to use a network...(its a mine so i assume a 10th is close enough for most stuff?)
@achmadbahtiar4492 Жыл бұрын
Why in R10 the status solution does not use RTK FIX or RTK FLOAT?
@kellysurvey6 жыл бұрын
Using Trimble equipment since 2003 bought the first S6 in NE US. Great stuff.
@SurveyingWithRobert6 жыл бұрын
SteveN Kelly I agree. Been using Trimble since mid 90’s myself.
@narendrasukhdeo88153 жыл бұрын
Hello, I recently purchased an R10 along with a TSC3 with Trimble Access 2017. On setting up a base station, I would like to take the reading of a point for a few hours and then average it to determine a mean value. How can I do this?
@SurveyingWithRobert3 жыл бұрын
I think you are talking about static. Where are you from?
@narendrasukhdeo88153 жыл бұрын
@@SurveyingWithRobert Yes, I'm talking about static logging. Trying to get the base to log for 2 to 3 hours but no luck. I'm from Guyana, South America.
@RickMarshallMaps4 жыл бұрын
Thanks for the great video. Lots of good information
@pablo653159 ай бұрын
Hi Robert, great video, I just wanted to ask, do you think this equipment is suitable for surveying kerb lines on uk roads? the dimensions for the kerb are 255mm x 125 x 914mm and i am expected to survey back of kerb to front of kerb along the surface of road but i am suspicious of the accuracy especially with elevations
@SurveyingWithRobert9 ай бұрын
You are looking at best case elevations will be 4mm but expect 4 cm’s. Horizontal is usually 4mm or better in some cases. If you need really tight vertical you may want to look at a robot.
@dat168557 ай бұрын
used to work with r10, loved them. you could felt the quality. really miss them.
@SurveyingWithRobert7 ай бұрын
Great boxes. R12’s are amazing
@garytucker57486 жыл бұрын
Brilliant kit,used back pack trimble system,very accurate back in 90s
@garytucker57486 жыл бұрын
Happy Yule all thank you for sharing Sir.
@roberttrevino50586 жыл бұрын
Thanks for the info! I'm not a surveyor but I do use the R10 with TSC3 data collector for work.
@SurveyingWithRobert6 жыл бұрын
Robert Trevino what do you do?
@roberttrevino50586 жыл бұрын
Surveying With Robert I'm a staking contractor for AEP Texas.. I mark out new pole installments, electric pedestals/ underground pedestals and transformers for them.
@SurveyingWithRobert6 жыл бұрын
Robert Trevino so what’s your thoughts on the gear?
@roberttrevino50586 жыл бұрын
Surveying With Robert I'm not gonna lie.. it's the only equipment I've ever used. Besides that I think it's great! I only use basic functions because of the area I live in but I know it's potential is beyond me.
@SurveyingWithRobert6 жыл бұрын
Robert Trevino your honest! That’s the making of a good surveyor! Keep an eye on my channel. You may catch some helpful tips coming soon.
@tomislavv5 жыл бұрын
In your opinion, is surveying with Trimble base+rover more precise than rover+gsm?
@SurveyingWithRobert5 жыл бұрын
Yes would be the quick answer,
@Average_Joel_Runs4 жыл бұрын
Hi Robert. Is the compensated point feature similar to the tilt feature on the R12i?
@SurveyingWithRobert4 жыл бұрын
Yes and no. The tilt is way better!
@xlorinox2 жыл бұрын
Was this the version 1 or version 2?
@SurveyingWithRobert2 жыл бұрын
V-1
@johnhalabarec91565 жыл бұрын
Hi Robert, I have the R10 and looking at used S5 + 360 prism. Can the standard prism integrate with the R10 or do I need the R10 prism?
@SurveyingWithRobert5 жыл бұрын
if you have a R10 then you really want a R10 prism. You can use the standard 360 but you will need to notch the rubber bumper for the antenna
@asrarahmed1205 жыл бұрын
Good.. Thanks also we are using R10 gps
@lamayengineeringservices6 жыл бұрын
You’ve converted me from Leica to trimble now
@SurveyingWithRobert6 жыл бұрын
Brought you over from the dark side did I!
@TreyJaxn4 жыл бұрын
I didn't know bill engvall was a surveyor.
@georgeofosu-hene19096 жыл бұрын
good stuff
@SurveyingWithRobert6 жыл бұрын
George OFOSU-HENE glad you enjoyed it.
@sammcsam24194 жыл бұрын
love you bby
@Justin-uc8sc3 жыл бұрын
😘
@AngelSanchez-du8ze5 жыл бұрын
Your trying REALLY REALLY hard to justify that 25 grand price tag.....
@SurveyingWithRobert5 жыл бұрын
They are great receivers but $25,500 is a lot for a surveyor.