Suzuki GN 250 Cafe Racer Build - Part 6: Electrics Tray

  Рет қаралды 54,366

House of David M.C.

House of David M.C.

Күн бұрын

Пікірлер: 33
@HouseofDavidMC
@HouseofDavidMC 7 жыл бұрын
0:29 electrical components 1:01 tray template and component layout 2:22 transfer of template to sheet metal 3:07 cutting 3:39 shaping 4:34 more shaping 6:10 final fitting 6:34 tray welding 6:44 cleaning welds 7:10 ignition switch hole 7:38 components in place 8:52 welding tray to frame 9:05 done
@CafeRacerGarage
@CafeRacerGarage 6 жыл бұрын
Cool video my bike building brother :) Keep them coming
@absolutetuber
@absolutetuber 6 жыл бұрын
dang...that was an awesome video. I'm pouring over videos as i go through my build and yours was added to my list for the electric tray and you earned another subscriber. thanks!
@lcrgarage3245
@lcrgarage3245 6 жыл бұрын
Building a virago cafe right now. Your tray looks good. I thought the electronics tray would be kinda simple. It kicked my ass. Lol...got it looking ok on second attempt.
@HouseofDavidMC
@HouseofDavidMC 6 жыл бұрын
Brice Loyd haha. I thought every step was going to be simple 😂😂
@razst1
@razst1 2 жыл бұрын
Nice work! For the Antigravity lithium battery, did you add any BMS (battery management system) as this battery doesn't include a built-in one so you don't have over charge, under charge or short circuit protection. I would very much like to add this super small battery to my GN250 but afraid of doing so without a BMS.
@samuelpocklington4032
@samuelpocklington4032 7 жыл бұрын
Nice work mate!
@HouseofDavidMC
@HouseofDavidMC 7 жыл бұрын
Samuel Pocklington thanks, I'm excited to get it finished.
@wildarkanaworkshop2099
@wildarkanaworkshop2099 2 жыл бұрын
@@HouseofDavidMC Yo House of David!! Quick question..! What regulator/rectifier did you use to pair with the antigravity battery? About a year, maybe two, or so ago I had installed a ballistics battery on my GN250. The guy I bought it from had already replaced the regulator, so I presumed I’d be alright.. turns out that sh*t almost exploded under my ass!! Long story.. Anyhow, just wondering how to go about this. I haven’t been able to source one that specifically says lithium ion compatible reg/rec for gn250. It’s like a Sasquatch dude..I know they’re out there, but I just can’t find them! I figured it might be possible to pick your brain via the tube. Holla 🤙🏼
@danrwse6226
@danrwse6226 7 жыл бұрын
nice work!!!
@HouseofDavidMC
@HouseofDavidMC 7 жыл бұрын
hey! thanks so much, Melnic :) Stay tuned.
@jobmoisesperezsanchez1176
@jobmoisesperezsanchez1176 3 ай бұрын
Me gustaría saber si puedo conseguir esos componentes eléctricos sobre todo el cableado eléctrico con sus conectores de la GN 250.
@alexbuzas918
@alexbuzas918 5 жыл бұрын
ill probably do something close with my build, but probably make some cuts and angled vents to catch air to help cool the electronics
@Simon0Hohnen
@Simon0Hohnen 5 жыл бұрын
Damn, this is lit😂👌
@andrewbarlow7922
@andrewbarlow7922 3 жыл бұрын
@house of David MC - what electrical components did you squeeze into the tray? Ive built the same tray but wondering where you located your Rectifier? and di you purchase a new rectifier for the Antigravity battery... if so which brand?
@seanhughes1002
@seanhughes1002 3 жыл бұрын
Have you found out yet? I’ve come to some question with my build
@andrewbarlow7922
@andrewbarlow7922 3 жыл бұрын
@@seanhughes1002 no not yet -- im trying to figure out myself what he puts in the tray from the video - I'm also trying to figure out where the pacifier/rectifier goes and whether to put it in the tray to make sure it doesn't over heat - waiting for my tray to come back from the sheet metal worker so will keep you in the loop when I figure out positioning
@danielspitaletti3947
@danielspitaletti3947 6 жыл бұрын
Great job! It looks nice. How long does it take to set a tray like this?
@HouseofDavidMC
@HouseofDavidMC 6 жыл бұрын
Daniel Spitaletti thanks!! It took me about 3 hours.
@sirbow2
@sirbow2 7 жыл бұрын
Lookin good man. Question though: What's your plan for painting? I just sprayed the first coat of primer on my frame and some of the grinder marks are showing through. Are you gonna bondo where you welded/used a grinder?
@HouseofDavidMC
@HouseofDavidMC 7 жыл бұрын
yes, I plan on applying bondo where needed. Also, that JB Weld Metal Stick works good on imperfections too. I kinda like it better for tubing.
@TheBarberOfGentlemen
@TheBarberOfGentlemen 6 жыл бұрын
Loud!!!🔥💪 im on my project right nowto rebuild a Suzuki 750GT Le'Mans 1975' where i can find parts for my bike. any good page online?
@HouseofDavidMC
@HouseofDavidMC 6 жыл бұрын
you tried www.suzukipartshouse.com ??
@jamesmealing5753
@jamesmealing5753 2 ай бұрын
Ok😊
@warriorway5287
@warriorway5287 6 жыл бұрын
Do you worry about it heating up in the box?
@ricardogoncalves9318
@ricardogoncalves9318 6 жыл бұрын
Hi,you think i can use the same battery at gn125?tanks
@montymccune201
@montymccune201 6 жыл бұрын
yes!
@ricardogoncalves9318
@ricardogoncalves9318 6 жыл бұрын
And my indicators stop working any idea?
@wildarkanaworkshop2099
@wildarkanaworkshop2099 2 жыл бұрын
@@montymccune201 Yo Monty!! What regulator/rectifier did you use to pair with the antigravity battery? About a year, maybe two, or so ago I had installed a ballistics battery on my GN250. The guy I bought it from had already replaced the regulator, so I presumed I’d be alright.. turns out that sh*t almost exploded under my ass!! Long story.. Anyhow, just wondering how to go about this. I haven’t been able to source one that specifically says lithium ion compatible reg/rec for gn250. It’s like a Sasquatch dude..I know they’re out there, but I just can’t find them! I figured it might be possible to pick your brain via the tube. Holla 🤙🏼
@Jimfowler82
@Jimfowler82 6 жыл бұрын
Why didn’t you just draw round the template on the metal?
@saschahenning2508
@saschahenning2508 5 жыл бұрын
what is the Song Name?
@montymccune201
@montymccune201 5 жыл бұрын
Sascha Henning check the description 😀
@saschahenning2508
@saschahenning2508 5 жыл бұрын
@@montymccune201 Sorry but I can not find this song .. please send me the artist and song name
Suzuki GN 250 Cafe Racer Build - Part 7: Bondo And Prime Frame
5:38
House of David M.C.
Рет қаралды 33 М.
Scrambler / Cafe Racer Electrics Tray, DIY
8:22
Cafe Racer Garage
Рет қаралды 119 М.
Smart Sigma Kid #funny #sigma
00:14
CRAZY GREAPA
Рет қаралды 88 МЛН
Каха и лужа  #непосредственнокаха
00:15
SUZUKI GS550 Cafe Racer Build [Part 1] - PROBLEMS!
8:56
Adrian Leggett UK
Рет қаралды 1,8 М.
Suzuki GN250 EP38 -  Exhaust pipe
42:37
Kepperi's Garage
Рет қаралды 11 М.
Suzuki GN 250 Cafe Racer Build - Part 13: Carburetor Basics
11:48
House of David M.C.
Рет қаралды 50 М.
6 STEPS TO SIMPLIFY MOTORCYCLE WIRING!!!
10:11
Cafe Racer Garage
Рет қаралды 63 М.
Suzuki GN 250 Cafe Racer Build - Part 15: First Start
7:42
House of David M.C.
Рет қаралды 69 М.
How to make a cowl out of metal | Cafe racer cowl |
7:26
DailyDrivenDeathTraps
Рет қаралды 9 М.
CAFE RACER BUILD, DIY BATTERY ELECTRONICS TRAY - Honda Scrambler Ep9
11:47