Suzuki Jimny Gen 4 JB74, Ironman Lift kit: the whole process, including castor correction bushes

[@tugboat8475]

Great info video, so this is sold as an Ironman kit jimny? I see my local tire shop advertisers iron Man products, if i was to put new tires on the original rim. When doing the lift, what size tire would you recommend? We do 80% normal daily drive 20% basic dirt tracks. Thanks

[@febuilds]

We currently have 235/75r15 but we highly recommend 215/75r15, Infact the dealer also recommended 215/75r15, I’m not sure about the rules on your side with concerns to roadworthy and the warranty but it seems to be a safe bet to go for 215’s. Anything bigger will cause a noticeable difference in a reduction in power. Also if you are keeping your Jimny light, it would be wise to go for the b grade springs and not the c type. There is a brand called Des Sol, they also make really good suspension kits depending on your budget.

[@tugboat8475]

@@febuilds thanks for the quick reply. We are in South Australia. I'm quite sure the tire people shouldn know the regulations as in law and defects, etc. We can legally 2 nch lift anymore then 3" it's needed to go over the Pitts, to pass. Cheers

[@heavyjohnny]

I’ve been looking all over for an 80mm iron man lift. It is not listed on their site. Did you use the 50mm lift with spacers to get to 80 mm?

[@febuilds]

No spacers at all. Type c springs gave me that lift. They are abit harder springs than the normal b type springs

[@aubreytshepondala8667]

​@febuilds do you have springs and shocks for Suzuki Vitara Brezza 2022 model and how much will it cost. I have a bumpy ride when I drive on highway or rough road. Please assist

[@lmalesci]

I have a question for you experts in the 4x4 sector! (and I would like to know if you can tell me if it is true that the ironman nitro gas shock absorbers go well with the original set-up and can be adapted with the +5? I have a Suzuki jimny 4x4 with m13a 1.3 l petrol engine with shock absorbers and standard settings, yesterday afternoon I picked up the new ironman nitro gas shock absorbers and the 4x4 spare parts dealer in Florence told me that these ironman nitro gas shock absorbers are ok for 4x4 off-road vehicles with stock trim or in a second you could put the springs higher and it becomes a +5 high trim is that true? Greetings from Florence Italy!)

[@febuilds]

We are not experts, think of us as scientists in a lab trying experiments. 😏😉 the ironman springs do lift the vehicle correct, however, we would advise buying the whole kit, not just the shocks alone

[@armandolopez-if6bj]

Cheap stuff

[@lmalesci]

@@armandolopez-if6bj non entiendo esta palabra Cheap stuff?

[@vikasbisht2192]

amazing work.ironman rocks

[@Yaar_Punjabi_Of_Uk]

Plan to install in 5 door Jimny india

[@HAL-vu8ef]

How are you liking the Grandtrek tyres?

[@febuilds]

They Are not bad, abit noisy in my experience on the tar. I recently changed them to general gabbbers at3 which i feel they are alittle less noisy. I will release a video for this

[@sailorsanjoy]

What diff guards are on ? Where did you buy them from ?

[@febuilds]

Des Sol, des-sol.co.za. If you buy it, say in the purchase comments that you saw it on the FE Builds video. They ship world wide

[@Yaar_Punjabi_Of_Uk]

Very Good Like subscribed 🎉🎉🎉🎉🎉