SW-Motech skid plate/engine guard installation

[@astrozito]

Hello Andy For information ; at 22 minutes , torque for Side stands braquet bolts is 50 N.m , and need to be glued .(From the service manual) ✌

[@Lorbuverse]

Thank you for the tutorial. I wasn't sure if i did a mistake but the sprocket guard must on mine away too. Good made video and very useful information. Shopmanual said for the two screws from the kickstand-holder you have to torque with 50nm.

[@MotoAndy]

your welcome

[@shardulN-t9f]

Nice video, When installing the skid plate along with crash bars then you would require a spacer.

[@PAUL-yv2kk]

Brilliant, detailed "how to" video as always. Looks tidy too 👍

[@Pebbzor]

Good job! Now you can take the Versys off-road 😎

[@johnnys5419]

Great video👍 Good information😊 It is now easy to do the jobb. Thank you👏

[@MotoAndy]

Thanks 👍

[@daleleatherbarrow6354]

just 1 little mistake andy when replacing bolts that have locktight on them this should be removed before you put the new locktight on but great video as always im going to look into getting one for my versys

[@astrozito]

Do you have to remove it for oil change ? Thanks for this video ...

[@LRijt]

Again a great video, sorry you didn’t get to use the new chair…. Have you ever had the Versys bottom out, hit the ground ? I have never, but I do not drive offroad - and Versys is not really intended for offroad anyway. Just wondering why you installed an engine protector - to improve the already good looks of the bike ? Keep making these videos, they are great and a real help when I am working on my bike !

[@MotoAndy]

Thanks, I did use my new chair 😁During my stay in the Alps, I rode on roads of various quality and it often happened that stones bounced off my exhaust, this was the reason for the installation of a skid plate and it has nothing to do with the looks.

[@mariuszmisiulajtys4072]

Cześć, Świetny film, no Versys wygląda naprawdę masywne, o te modyfikacje to jestem zazdrosny 😂 pozdrawiam.

[@MotoAndy]

dzięki i pozdrawiam

[@yl4970]

Hello Andy and thanks for a great instructional video! Question: I have engine crash guards from Givi, NOT SW-Motek. Do you think the removal of provided spacers (as you have shown) will work same way as you have shown?

[@MotoAndy]

if the givi mount is of similar thickness it will probably be the same

[@Ivan75-Spb]

Привет Энди! Подскажи пожалуйста подойдет ли по точкам крепления эта защита на Versys 1000, 2012 года?

[@MotoAndy]

ознакомившись с инструкцией по сборке моделей 2012 и 2022 года, похоже, что они могут подойти, по идее крепления одинаковые. На официальном сайте sw-motech вы можете скачать инструкции по сборке обеих моделей и сравнить их.

[@Ivan75-Spb]

@@MotoAndy Энди большое спасибо!!!