Damn I love SWAG! Building damn fine products, helping us make the best of what we've got, and saving us money! Oh, and innovative as hell! You guys rock! Keep making new products, there's a little money left in my 401k!
@12345NoNamesLeft11 жыл бұрын
Thumbs up on the better audio and video quality
@hugofs43243 жыл бұрын
I'm buy one but no thumb knob at the kit
@guloguloguy7 жыл бұрын
( ....NICE VIDEO/AUDIO!!!! ) I MUST Order all of these things!!!,.... ASAP!!! THANKS!!!
@JamesGMunn9 жыл бұрын
Please invent an attachment for these saws to cut pipe, tubing and shapes at a true 90 or 45 degrees! I bet you could sell a lot of those. I am tempted to build something myself since I have not seen any such aid and it is fairly difficult to get a good straight cut by hand. This seems like it would be great for both welders and plumbers.
@minnesotanature8 жыл бұрын
Will it fit my milwaukee portable band saw model 6242-6 ? Its max capacity is 3 1/4" . Do you sell one for my model?
@Swagoffroad5 жыл бұрын
Our V3.0 table will fit your saw. Be sure to select the check box for your saw. www.swagoffroad.com/SWAG-V30-Portaband-Table_p_55.html
@SkipLaC4 жыл бұрын
Is there a version of this for the Fuel cordless Milwaukee bandsaw or the Dewalt deep cut cordless bandsaw?
@Swagoffroad4 жыл бұрын
For a full list of saws that can attach to our tables. Please check out our website swagoffroad.com
@DONT_AH4 жыл бұрын
I just received the v4 table and I have the same saw you have in this video, there seems to be a lot of play and wobble with the saw installed on the table. I examined the reason why and found that, the adjustable shoe moves from side to side. Is this normal?
@richardswan74519 жыл бұрын
I just got the V4.0 table and was impressed with the quality of materials used; however, the thumbscrew that goes underneath to help hold the saw onto the table just barely catches the tip of the saw's shoe on mine. I'll either have to use a large washer or drill and tap a hole closer to the saw for a solid fit. I wasn't impressed with the response from the company - didn't indicate any sympathy or inclination to swap out; basically "we haven't had any issue with a saw falling of a table" was what I got.
@codyrobertson463010 жыл бұрын
Great idea. TIA
@manoloramirez64567 жыл бұрын
where can I buy this table
@Swagoffroad5 жыл бұрын
You can buy this table through our website here: www.swagoffroad.com/SWAG-V40-Portaband-Table_p_63.html
@codyrobertson463010 жыл бұрын
Please watch " dmcguinn1" KZbin channel he has a new video on how to do a few simple modifications to the v4.0 table so the it will work with the new Milwaukee fuel bandsaw .
@garng32173 жыл бұрын
Hi, will it work on my BOSCH BSH180B? Thanks
@Bmr4life10 жыл бұрын
Thanks, I'm sold. Just bought this saw and couldn't figure our how you were mounting it.
@JeffinTD3 жыл бұрын
Would love to see a version for M18 Fuel, with some sort of remote control for the trigger.
@Swagoffroad3 жыл бұрын
Jeff, Our V4.0 table is compatible with the 2729-20 which is the M18 Fuel Milwaukee. Unfortunately, there isn't really a way to make a remote switch for a battery operated saw without rewiring it. We recommend just using a small spring clamp on the trigger switch. Thank you, SWAG Off Road
@ericfoerster20092 жыл бұрын
It’s 2022 and your table is still awesome. Late to the party, but I just bought mine!
@Swagoffroad2 жыл бұрын
Glad to hear that you are enjoying it!
@cal920c7 жыл бұрын
Know any way to control the M18 Fuel deep cut 2729-20? Or at least making it hold without a ziptie...
@Swagoffroad5 жыл бұрын
We include adjustable Velcro straps with our hardware kits to allow easy application and removal, so you don't have to use anything as permanent as a zip tie.
@Beltfedshooters9 жыл бұрын
With using the porta saws which blades do you prefer 18tpi or 24 tpi?
@Swagoffroad5 жыл бұрын
We recommend checking the side of the packaging which your saw came in for their recommended TPI for blades.