Sway Bar Install | FRS BRZ 86

Pedders Sway Bar Kit - www.ft86speedf...
All Sway Bars - www.ft86speedf...
--------
Instagram - / ft86speedfactory
Facebook - / ft86speedfactory

[@puppetmaster413]

The thing I love about the 86 is it's so easy to work on and so much after market support it's so awesome

[@StanleyTinyhat]

Just put stiffer Eibach sway bars on my frs a few weeks ago and the difference was way more noticeable than I was expecting, high speed corners feel like a dream

[@adancisco]

daniel escobedo what were the specs you got?

[@chandy4ever]

Front or rear?

[@killroy2993]

Rear only: buy a bar off a Forester/wrx 17mm $50 on eBay. Stock rubber mounts can still squeeze on

[@xZipkan]

I think having the lift made your install time way faster.

[@ThatGuy-ci3qz]

It wasnt the lift it was already having the covers off that go under the car

[@nestorconsuegra]

Llevo un año y medio con un ruido horrible en el carro, he pasado por más de 5 concesionarios de Toyota y nadie daba con la respuesta, hoy descubrimos que es producto a la barra estabilizadora. Ruidos al conducir plum plum etc Cambiamos de todo ! Amortiguadores parrillas, todos !!! Y nadie podía imaginarse que sería este el problema

[@ShimoYukimura]

YES! SWAY BARS AND STRUT BAR VIDEOS, PLEASE!

[@ash_katchem2186]

I did this by myself on jacks and stands.

[@spencerb311]

Does anybody know if going one level thicker on the rear swaybar and adding a front strut tower brace is a good idea?

[@richardunderwood950]

Spencer Bell if you’re driving a pre refresh brz id just put the one level thicker sway bar on. Imo the front doesn’t need anymore stiffness since it suffers from a tiny bit of understeer on turn in. Check out “the topher brz suspension swap” he swaps suspension over from a 17+ car and it helps a ton. I’m doing the same to my car.

[@spencerb311]

Richard underwood I’m driving a 2019 86 TRD With the handling pack, I can tell my old FRS was balanced way more for over steer than this car, this car hardly oversteers compared to my old car, I have just been finding a way to get back to what the frs was like

[@walterm127]

Wait why’d you take the wheels off if they were on afterwards

[@tristanskylark]

What do Sway bars do?

[@TripleTapHK]

Thicker sway bars = less body roll. Also, the difference in stiffness between the front and rear sway bars affects how much understeer or oversteer you will get. Essentially, a stiffer sway bar transfers more load to the outside tire in a corner which in turn reduces the overall grip of the axle. Stiffer Front Sway Bar = Less Front Grip = More Understeer Stiffer Rear Sway Bar = Less Rear Grip = More Oversteer

[@DeVanHelmoski]

14mm almost as hard to find as the 10...

[@chandy4ever]

Didn't know 2017+ had increased rear sway to 16mm. What's your source?

[@Ecosse57]

can't tell the difference between 14 and 12 mm but at least she isn't afraid to get her hands dirty.

[@mightycarmods]

Good video mate!

[@brian_sipe]

Just what I was hoping to see. :)

[@squinto86]

Do you need upgrade the end links when getting sway bars?

[@anthonyzhu5971]

no, i installed my whitelines with stock end links :)

[@nagasako7]

If that was my car, and I had lift. I'd probably clean off the brackets and spray them with rustoleum. The bracket looked like it was starting to rust

[@paolojusay9454]

Yooo MightCarMods, Moog just complimented you for having a good instructional video on this installation on their recent video! 26:01 on their new video

[@patrickm4281]

glad you're repping Australian products mate

[@hairyviking6047]

Pedders! A good Aussie company. Well made suspension components

[@jcramond73]

And a rip off price to go with it.

[@1atinlove]

Awesoms vid...thanks ...what about front control arms. Or how to clean and degrease the suspension parts as you replace. Or prep to paint parts that are not going to be replaced to have show quality

[@jessesantamaria6863]

lol Lube the Rod..

[@ceehang8644]

Any update on the other car that crashed? 😮

[@FTspeed]

Its gone forever

[@PLATESWEEPER]

@@FTspeed my condolences

[@ceehang8644]

FT86SpeedFactory RIP. 😕 It was one of my fave 86 on KZbin.

[@Jeeplover1O1]

I want to sand blast and powder coat those brackets

[@daniellorenzo9981]

Hope to c lowering control arm next please thanks

[@Abdiel8164]

Man i really miss this guy 😢❤

[@deeerek0756]

With the limited amount of body roll this car has from the factory, won’t a stiffer rear sway bar just induce more oversteer? Some body roll is desirable so the weight of the car is planted on one tire and maximum traction is achieved.

[@Ekksanpher]

I think the purpose of adding both a stiffer front and rear ARB is to avoid just that, if only the rear was made stiffer you would be correct. This is why you get adjustable ARBs to tune a cars handling balance :) hopefully that helps

[@thetoyota86perspective54]

If you have a square spring rate, the car may be prone to understeer just a touch. In this case (as is with mine), a stiffer rear bar might lean the car towards oversteer which is better especially for track work

[@Carlos.Rivera]

@@Ekksanpher i want the rear swaybar on soft setting, front will be oem. It will understeer?

[@Ekksanpher]

@@Carlos.Rivera It's not really possible to say as there are too many variable for a youtube comment section! :P If it does understeer, try moving the rear arb to the stiffer setting :) one of the perks of adjustable suspension. IF the aftermarket rear arb is stiffer than OEM on the softer setting (which I do not know) it should be more prone to oversteer than stock. In general, stiffening an axle will make that axle more prone to breaking traction first. (by increasing weight transfer across that specific axle). Making the other axle softer in comparison. If a car is very understeer prone and you stiffen the rear and soften the front, it may still understeer, but should be more neutral than it was before. The 'forbidden' alternative is to remove the front stock ARB (softening the front, increasing the rear WT) but that will likely cause other problems (like increased overall body roll) so It would likely increase lap times - but importantly, it is a free mod.

[@cyrus.gonzales]

Litty

[@aroundomaha]

I did the front today on my 2022. The rear subframe mount is slightly different as there is only one 14mm bolt but there is an additional brace. I had to laugh when you realized you lost track of which way the bar was when you took it off since it took me about 30 minutes of fussing with it to make sure.

[@Aearonjer]

Nice to see some Aussie products, been using Pedders products since the 80's.

[@chaukemt]

goov video, the good thing about the brz or 86 its easy to work on. lots of aftermarket parts. its easy to maintain this car. i luv it

[@AlphaR6]

would you rather a black or white 86

[@jackcanter6792]

Have there products been shipping out fairly fast or is there gonna be a a 2 week shipping wait

[@DarkWolf9998]

Love that you’re using the same DeWalt impact that I have lol

[@G42J3T]

Did anyone notice you tried to put it in upside down 1st?😂

[@Zohar-Modifier]

don't wish Thomas watch get scratch.....

[@thomasscherz8093]

finally you earn some muscles.....

[@slack179]

Will you guYs be at ICC this weekend?

[@discoptato]

Do how to install knuckles

[@jordandocker]

The 86 already has a centre of mass 2mm off the road and sits flatter around corners than just about anything road legal. Why does it need upgraded sway bars?

[@kevildub]

Cause they're red and look cooler? I was thinking the same and I own a bog standard 86.

[@thedisappointed2530]

Yeah, I have a TRD 86… shit sticks like glue in the corner bone stock. Was wondering the same… would stiffer bars be worth it? I’m not savy enough to say I know

[@ivan-kd2kw]

Any good performance mod around 1k-3k? Wheels and tires I got. Any other ideas? I want to see people idea.

[@bakedbotato7884]

ivan Headers and Tune ! Def wakes the care up. If you can afford it an have access to e85 it definitely makes a BIG difference. If looking for other options i would definitely consider a good brand of coilovers, FA500, BC Racing, Or even a more budget friendly coil like Tein.

[@ivan-kd2kw]

Bign52 thanks for the reply I was thinking about the tomie headers and the bc racing coilovers. I'm probably thinking of 2jz swap in the future like 3-4 years from now.

[@johng69er]

Torque specs as follows Tight is tight 🔱