Sweet AMD and Lian Li PC. All the RGB! Ryzen 5900x and Sapphire Nitro+ 6900XT Special Edition.

Build Specs:
AMD Ryzen 9 5900x
MSI MAG X570 Tomahawk WiFi Motherboard
Sapphire Nitro+ 6900XT Special Edition Graphics Card
G.Skill Trident Z Neo RGB 3600 CL16 64GB RAM (4x16)
Mushkin Enhanced Pilot-E M.2 2TB NVME Storage
Lian Li Galahad 360 AIO Cooler
Lian Li Uni Fan 120mm (x6)
Lian Li O11 Dynamic Case
MSI MPG A850GF 850W 80+ Gold Power Supply
This one took quite a while to build. Mostly just working with parts I've never used, as many of my builds use ASUS parts.
A couple small features of this build I really enjoyed are the 90degree USB 3.2 gen 1 port on the motherboard, and the 90degree USB 3.2 gen 2 cable on the case. I think every MOBO and case should have those. Also, the Lian Li fans were a dream to work with. Highly recommended.

[@BobSmith-gh5wj]

Nice build - I pretty much have the same build. Lian Li case PC-08 and Ryzen 9 5900x and the Power Color Red Devil RX 6900 XT . - Do your self a favor like I did.. you have gone this far now put the cherry on top and get the LG C1 OLED tv for your monitor - you wont regret it.

[@waggy401]

This build actually was sold to a family member. He's loving it. I built mine in a Be Quiet 700 case with a 5950x and 3090. Normally I run two 1440p monitors at 165 hz, but have hooked it up to my 55" LG OLED. Normally I'm only two feet away from my monitors the way my desk is set up. The C1 does sound like a good idea, though.

[@BobSmith-gh5wj]

the 49"" LG C1 OLED

[@flashlightning6742]

Have you had any problem with gpu sag? I just got this card recently and even after 2 days of being installed, the pcb on the side where the pcie slots are seems to be a bit warped, being straight at the slots but sagging towards the end. I can’t tell if I am just being paranoid or if I should worry.

[@waggy401]

I actually don't know since I sold the system. GPU sag is quite the problem these days. I don't remember ifit was this card that came with an anti-sag bracket, but if it did i didn't like it. There are many companies out there these days that make supports, all the way from simple plastic to crazy LED-covered stuff. Sag doesn't usually hurt anything, but it looks bad and can put strain on components. It's nothing you have to do right away, but when you're ready you might want to put a support on it.

[@flashlightning6742]

@@waggy401 That's very helpful, thank you! I bought the GPU refurbished so it didn't come with the sag bracket it is supposed to, but I've heard things similar to your experience, it seems that the only place the contact rubber can be placed is practically at the supported end of the card, which defeat the purpose of it. I did pick up a sag bracket, I was just a bit paranoid as the PCB has a small but noticeable bend in it, and I don't know if that is from me leaving it unsupported for a few days, or if the refurb came like that.

[@AliRazaNour]

Did you have any issues with this card using the 850w PSU? I'm planning to get the same

[@waggy401]

No, no problems. I'm also running a system with a 5950x and 3090, both watercooled, on a Corsair 850W power supply. I'd probably run a slightly bigger PSU if running Intel or the latest gen high-end stuff. Especially that 4090. Keep in mind, the quality and efficiency of the PSU makes a difference.

[@AliRazaNour]

Oh yes, absolutely. I'm using the RM850x by Corsair. But I was just a bit skeptical if Ill be able to handle 6900xt SE. I'm also using a 7600x, with b650. So no real power hunger there. @@waggy401

[@waggy401]

@@AliRazaNour It should be more than enough, depending on what other components you use. PCPartpicker.com is a great tool - you can enter all your parts and it will give you an estimated power useage. Just entering the info you gave, it estimates 538 watts.

[@AliRazaNour]

Thank you, man. I appreciate your assistance. I have checked the PC Part Picker PSU calculator. I wanted to hear from someone with personal experience. This certainly helped a lot and boosted my confidence in getting the card. Thanks brother@@waggy401

[@SentientNut]

Cool build! What do your temps at idle/max usage look like with that CPU cooler?

[@waggy401]

I don't remember exactly. I already sold it. But I don't think it got over 65c.

[@DRSKINGDAVID]

Did the cable come with the card?

[@waggy401]

Yes, the argb cable was included with the GPU.

[@fluxyt7172]

What is the the software u used I have just built this build a year later

[@waggy401]

I start talking about that at around the 9:00 mark. But to summarize, I used the Sapphire TRIXX software, Lian Li L-Connect, and the MSI software. After setting up the first two, they both have the option to pass control to the MSI Motherboard software. At least, they did when I put this together. On my own rig I use SignalRGB, which would probably work with this setup as well.