A vital upgrade for the Reloop Spin! (JDDX2R-SP Fader)

[@Swiftstyle]

* not necessary to remove the fader cap for this mod. Lol

[@DevTr3nd]

Hey Swiftstyle can you recommend a good scratch fader for the Numark Mixtrack controller?

[@floconductor9090]

What a difference! I saw in somebodys video that he uses the original fader as a volume control between the bluetooth and „scratch“ channel.

[@randomguy5284]

What video was it? That would be cool as I heard the volume of the bluetooth is alot lower than the scratches. Thanks

[@itimmy101]

JD already has a fader the spin? Talk about being on top of things! Cool vid, freddy!🙏

[@timvandervoort4904]

itimmy101 it’s the one they use in the reloop spin scratch video

[@anttiskate]

A scratch tool with a fader that's completely s**t, and a replacement is pretty much mandatory. That's 300€ for a grey plastic Handytrax with a battery and BT receiver... :D

[@mixythedog]

👍

[@chubbyboy2242]

Freddy just FYI, you can set the fader to double cut mode and then simply turn the left adjustment screw until the fader stays open in hampster, that way you don't have to flip the fader over...

[@sporadikstyles]

I almost think they need a 2.0 already. I don't even skratch hamster but don't recall any skratch oriented product in the last 20 years that doesn't have a hamster switch. How was that overlooked? They also should've made a proper start/stop button opposite the fader and allow you to swap them back and forth depending which side you cut on, instead of a toggle style button above the tone arm. The constant flashing of the Bluetooth button with the bizarre logo I find kind of annoying, but a sharpie can easily fix that. (possible its just more distracting in the video than in person)

[@wallacebarnes2391]

that Headachesound Omni lookin better and better....

[@hot4futureyears2come]

That factory fader has is the same cut in time as the Herucles starlight , interesting. thanks for the info, i have to share this with my peeps.

[@djsoo]

Could you do the old credit card mod on the stock fader? Still boggles the mind that they wouldn’t give you a tighter cut for a device that is almost exclusively going to be marketed to scratch djs.

[@buddafingaz9403]

Respex & Big Upz my ninja!! Thanx for another awesome educational video man, your appreciated as always my friend!!.... 👍🙏😎🛸👽

[@KREMDemiK82]

This work for pt 01. Haven’t watched yet. Looking to modify one of my pt01. Tone arm and loop spin

[@PhuccjooMann]

I like it. It’s almost the perfect scratch instrument. Two biggest problems: 1- fader it comes with is not very good. 2- the mix between the the record and aux-in/Bluetooth is way off. It’s difficult to hear the beat even cranked to the max.

[@FuntClaps101]

I'm looking at getting a premodded version of this, it almost doubles the price. It has the upgraded fader, and a bunch of other mods like new platter, new tone arm and needle, are these other mods necessary or is it just the fader that needs replacing?

[@baggylean]

Starting to wonder if these things are intentionally designed to be upgraded? Am I being paranoid?

[@Konquer_DMV]

I thought the same...

[@adictiveadictive]

Lol me too

[@dasfreshyo]

thats exactly the philosophy behind upgrade marketing. if they make it perfect, they miss out on upgrade sales potential.

[@djonederisrael5792]

Thanks always for the in-depth vids Freddy! I’m really considering purchasing this unit w/ Jesse’s fader. This video has really helped my decision on this. I really appreciate it man! Also, what was the name of the rechargeable batteries you said you can use for this? Thanks fam!

[@MrFab189]

Why the red cable? If the white was in it before???

[@miles46100]

Is the included needle ok? or do I need a new tonearm and needle?

[@KrasavkinRomanE]

Thank you Friend Freddy.Peace.

[@DJ_PROMO_PR]

Any chance of a pitch slider mod for any of these portable turntables?

[@charlescowper]

where can we find the Jesse dean video explaining how to set u the fader to cut in on both sides? thanks

[@bartad1984]

i installed this as per video, but suddently have absolutely NO AUX, just the turntable, what am I doing wrong?

[@remixoitaliano1072]

WHY they cannot build a stupid decent fader in a stupid turntable in 2019 !?? Also GREY color is NOT cool Bah ! I think the best portable has to come

[@strange3953]

the omni by headache sound seems to be pretty good. It's not out yet though so we'll have to see.

[@jeromesusi1064]

Hi. I was going to buy the reloop spin but was wondering if the USB record port can function like the Numark PT01. Meaning you can plug straight to an iPad with an apple camera connection kit and use it like a Digital vinyl system with a mixfader?

[@mbf6160]

So reloop made a scratch tool manufactured it slaps a 250 dollar price tag on it and right out the box the fader is trash and has to be replaced yea I think I'll pass 🤨

[@lukeybizzel]

Great video as usual @swiftstyle. Do you have any info on what happens when you put a fader in the other slot as well? I'm sure i read somewhere you can use then use that to balance the output difference between the aux and the record volume? all the best L

[@Swiftstyle]

I believe that will only be possible with two Innofaders since they have an adjustable slope. Two of the JD faders will only give you two ways to cut. We will test this in a future video since Inno sent me a pair to play with.

[@netot5330]

Hi! Does your reloop spin have motor noise what can be heard from build in speaker or from outputs? Does someone know how to get rid off the noise?

[@miosnikmuzycznorolkowy5697]

what's on the puck|-''--|, the volume slider windows

[@kalloykalloy]

Hello Swifty, What kind of speaker did you use in these Video?

[@djnovayong3865]

You should make a shirt that says first cut with a turntable.

[@honprophetowen5449]

What battery power bank is that you have it hooked up to? How many hours do you get? I cant seem to find 1 that says 18650

[@DV91]

Does the plug also fit with the mini innofader or would you need a different connector?

[@jeanmosquea9539]

Do you prefer this unit over the PT01?

[@bboymac84]

Pretty easy!

[@a.v4775]

Hey man! Plz tell me your opinion. Should I go for pt01 or reloop? Which of this is More worthy?

[@Swiftstyle]

Namm is happening in June. Might wanna wait to see if something new gets announced.

[@a.v4775]

@@Swiftstyle ok man thanks for replying!

[@djjaydough]

Hi there Do you know what u can do with the reloop crossfader?

[@adamcvetkovski6524]

Where can the replacement be purchased from ?

[@djlala]

dope review .. is the fader interchangeable on this table .. meaning can be moved for right handed or left handed scratcher

[@brandonwilliams7548]

Yes

[@Swiftstyle]

Yes

[@buddafingaz9403]

What up, whats good my ninja, can I please request an answer to a question, related to the Reloop Spin? I have a JBL Charge 4, speaker, & im trying to figure out how to use it with the Reloop Spin, for both beats, & scratching? I bought both a RCA to AUX. Cable, & also a AUX. to AUX. Cable, as well, but cant seem to figure this ridiculous issue out, lol....bahahaha, I also took your advice, and ordered a Mini Innofader Pro-SP, & installed it myself, & converted the other cross-fader into a volume fader on the right....just wanna get professional advice on this subject, Thanx my ninja, your very appreciated,as always, Respect, & Big Upz!!..... 👍🙏😎

[@Swiftstyle]

J DubbZ what up! Hit me on my site it’s much easier to chat there. Scratch break.com

[@FREZINO]

What’s this pad the turntable is sitting on?

[@inmune593]

Awesome videos Freddy! I'm getting a lot into this scratching culture and I'm planning to buy a portable turntable but my concern is if the reloop spin is compatible to connect with iPad to run with Serato 7" vynils...keep up the good work!

[@Swiftstyle]

Thanks for watching! You might be able to run the spin into a Serato box and control the dvs that way but it doesn't support it internally. On another note running Serato on an iPad might not be possible just yet but maybe something like a tablet PC could do it. Peace

[@djsoo]

As is, you won’t be able to run a portable table with a built in fader with any DVS without running a separate mixer/fader - even with a box. Might be able to make a midi fader mod for Traktor but not out of the box from everything I’ve seen and read.

[@inmune593]

@@notmyrealaccount8564 Yeah, I think Mixfader with its app would be the way to go for what I intend to do. Cheers!

[@inmune593]

@@djsoo That's right. The only option to make it happen would be through Mixfader and its app. Thanx. Cheers!

[@tech1238]

If they added a cross fader curve this turntable would have sold out immediately

[@donnierush6322]

Is my fader broke then anyone help me out?

[@Shmack_]

Does the omni fader out the box cut good?

[@marksystemed4678]

Yes

[@DJServe1]

Dope

[@streetrider1958]

Great

[@velikilim]

Portable fader dıy plase swift Respect from turkey

[@KingsofTruth425]

👍🏼👍🏼

[@BeeDotEee]

Bought

[@topofabigoldpyramid]

....meh',But Great Review as Always

[@djnovayong3865]

If you want I can help you design one.

[@Hadookenken]

Shite not fit for purpose like most things these dayz

[@MERK12000]

Yo.. This 30 second install is Bullshit. They fail to mention if you have a model with the serial number RT1904... then your fucked and have to crack it open and switch a plug on the board. Exactly what i wanted to avoid. So check it..

[@boogiedownbronx73]

complete waste of money - someone make a proper portable turntable ready to scratch incl hamster option - not wasting 200, 300 on this crap -