Swiss Arms 1911 TRS 4.5mm BB CO2 Air Pistol

A brief look at the Swiss Arms 1911 TRS 4.5mm BB CO2 Air Pistol

[@JodyGabriele-wo7hz]

I have been wanting to buy a 1911 replica for about 2 years. Last Tuesday I finally "Pulled the trigger" as they say. I was down to a Tangfigleo Wittness or this gun. When I saw this piece in Stainless,I was easily swayed man. Now I'm looking for custom grips. There's a guy that makes grips for airgun but even grips for a real 1911 in .45. ACP can be used with a tiny bit of grinding the inside of the grip to clear the 12

[@kevw333]

Etsy is a good source for grips

[@John-Brennan]

Thanks very much for all the vids you post.... they've been really helpful in relieving my wallet of cash!! ;) Have only recently got into this hobby and am now totally addicted!

[@airgunreplicas77]

😂 apologies brother…

[@John-Brennan]

@@airgunreplicas77 Just purchased a version of the KLI Baba Yaga.... I'll send you a pic when it's kitted out. That gun feels so good in the hand!

[@stretch9674]

I have the exact same gun pal, to pull the mag out, you either have to cock it so barrel stays cocked or you can do it once it’s fully cocked…. You can add a suppressor or tracer using a reverse thread… the barrel has a reverse one. You can add a red dot if wanted and also a laser/torch… still finding a bigger mag and comfy grips

[@omkarraut6707]

Whats the muzzle power for this one ?

[@XxFnfAirsofterXx]

@@stretch9674 you can add tracers to bb guns?

[@yeeyeeboys4213]

Great video dude helped me out a lot

[@airgunreplicas77]

Great, that’s the plan!

[@tomfarrant2221]

Hi mate, great review cheers! Just picked up one of these, and love it apart from one thing - it always sounds like a bb is loose inside from the noise of the tiny black plastic plunger rattling about as it moves back and forward where the CO2 is released inside the slide - just wondering if this is normal for all of them? Cheers

[@ACatholicConvert]

I do like this one…I’m not a huge fan of the tactical rails, but they do look like they work with this gun. Can I ask where you got the replacement screws from for the grips?

[@airgunreplicas77]

I found them on eBay I think but can’t remember for the life of me!

[@ACatholicConvert]

@@airgunreplicas77 I’ve just got the Springfield Armouries 1911 Mil Spec in Stainless, but I feel the grips let it down, so I’ve ordered some new ones. I was just curious if the screws were universal size.

[@cfcheadhunter]

Love the stainless screws. Any idea where I can get some for my 1911 ? Cheers for the videos.

[@airgunreplicas77]

Think I found them on eBay tbh.

[@cfcheadhunter]

@@airgunreplicas77 Thanks. Just checking screwfix and toolstation.

[@cfcheadhunter]

Haven't taken my grips off yet. Any idea what size n length the screws are ?

[@MegaFrank1960]

They look nice, but would nicer if you countersunk the heads just a slight touch. Doesn't take much, but the screws would seat nicely, opposed to the oversized after market screws, which ride atop the grips...😁

[@GhostofCTC]

I think this is my favourite 1911 available

[@airgunreplicas77]

Totally see why mate. The recent Sig 1911's are gorgeous but there's something special about this one. Really modern with the rail, white dot sights etc but a really classy look to it!

[@paul55austria51]

@@airgunreplicas77Yes, there's something special about this one. Almost a copy of my Taurus PT 1911 .45acp. Like it.

[@LoneWandererNV]

Just ordered mine. It is so hard to find one in stock. I only managed to find one place that had it.

[@airgunreplicas77]

Yeah, I got mine when they were just released but they did seem to disappear quickly. Congratulations on finding one, I'm sure you'll love it!

[@LoneWandererNV]

@@airgunreplicas77 I can't wait. Great video, by the way! Subscribed

[@airgunreplicas77]

Glad to hear that mate, thanks.

[@jetsekoopmans492]

Link?

[@chairmanmeow8388]

@@jetsekoopmans492 Pelpax have got them in stock in the UK. £135. Mine is coming on Friday.

[@bigj73nsb]

Ok I have a question, what is up with the gloves, and your not the only airgun reviewer I see that always has gloves on??

[@javierserrano4875]

Necesito solamente el cargador ,donde puedo conseguirlo?

[@theiaraine]

Hey do you have a link to where i can pick one up?

[@ilijabosnjak76]

Just by coincidence I have Winchester Model 11 and Springfield Armoury 1911, and also by coincidence Amazon has perfect paddle holsters (OWB),they go about $30-35 ish and believe me or it’s worth the money 💰 All I need now is a good leather belt or waist band ,but honestly I am impressed with the quality of the holster… Its too bad I can’t get holsters for PFAM9B,just because of the bottom rail…Shaize

[@airgunreplicas77]

The PFAM9B is a replica of the Taurus PT92 and there are plenty holsters available. The one I use is made by IMI Defense.

[@ilijabosnjak76]

@@airgunreplicas77 Bro I live in Chinada I meant Canada 🇨🇦 😂

[@airgunreplicas77]

@@ilijabosnjak76 what do you mean? Is it tricky to get certain accessories? How about airsoft holsters?

[@ilijabosnjak76]

@@airgunreplicas77 I don’t know if those even exist here,not too many people do air soft,it’s either BBs,pellets or real powder burners for which you need license,I am just a collector and have 7 meters shooting range or 21 feet 👣 but I just can’t find a paddle holster,you know the ones that fit perfectly and you get positive click…

[@airgunreplicas77]

@@ilijabosnjak76 how about this? www.amazon.ca/Retention-Holster-IMI-holsters-Israel/dp/B00934HM5K/ref=mp_s_a_1_3?crid=INMI1TP45AVB&keywords=imi+pt92+holster&qid=1683919249&sprefix=imi+pt92+holster%2Caps%2C139&sr=8-3

[@stevewebster6402]

How do I keep the gun from rusting?

[@airgunreplicas77]

I have a cabinet where they’re stored and I keep a few little packets of silica dotted around in there. They often come in packaging with things to absorb any atmospheric moisture.

[@stevewebster6402]

@@airgunreplicas77 cheers mate

[@stretch9674]

Had mine 4 month, no rust yet and it’s always top of my cupboard in kitchen

[@stevewebster6402]

@@stretch9674 sound I got mine but the mag thread was fucked so gotta wait for the shop to get me another

[@paul55austria51]

It doesn't rust because it's made of ZAMAC

[@tom-x2w7h]

do you do procto;s with those rubber gloves ?

[@RS-xq6je]

Yes but they're on his only fans

[@samfisher1890]

What is the legality of owning this in the UK?

[@airgunreplicas77]

Completely legal if you’re old enough (over 18 I think). There are laws around where you can legally shoot and transportation etc so check those out. For the most part, if you’re just shooting on your own land, remaining considerate of any neighbours and not breaching your property boundaries you should be ok. Or find an airgun club maybe. Do check out the laws first though regarding shooting, but ownership is no problem.

[@samfisher1890]

@@airgunreplicas77 are there any airsoft fields in the UK?

[@airgunreplicas77]

@@samfisher1890 yeah plenty. Just for clarity though, this isn’t an airsoft pistol. This shoots 4.5mm steel bb’s, not the 6mm plastic ones. Although I believe you can get an airsoft version which is almost identical.

[@SFGW]

You only need to be above 18 to buy airguns, but airsoft guns have completely different rules so don't confuse the two.

[@billrundell2097]

Why are leather gloves required to handle the BB CO2 air pistol?

[@airgunreplicas77]

They aren’t required but I get this question a lot so I made an explanation video. Check it out on the channel and thanks for watching.

[@RS-xq6je]

​@@airgunreplicas77having purchased an umarex s40 for the bairn years ago and liking a shiny clear finish I understand the gloves for the sake of handling for demos

[@sc0or]

Ok. I understood that this was a VERSION ))

[@airgunreplicas77]

Not sure what you mean here mate.

[@frozentits_records1691]

🤣🤣🤣🤣🤣

[@daimdasuki4416]

Where do you buy this I can’t find it online

[@airgunreplicas77]

Are you in the UK?

[@miku0621]

Will real 1911 grips fit this one?

[@airgunreplicas77]

You'd need to channel a groove up the centre of the grips to allow for the CO2 bulge in the handle but yes people do customise these with real grips after a little woodwork.

[@miku0621]

@@airgunreplicas77 Okay great. i can carve the groove in and i was expecting that. Thanks!

[@ahsokatano6059]

found my gun, last time, stay out of my room

[@airgunreplicas77]

😂

[@taichialf]

What is missing? The incredible Blowback! Bro when you show it and make the video shorter everyone will look it 🧐

[@airgunreplicas77]

Thanks for the suggestion mate.

[@MrZola1234]

Wish I could find a SS version…. Now seams like I would have to settle for the tan.

[@airgunreplicas77]

I can’t find the tan one anywhere in the uk right now. I’ve invested in the Sig Emperor Scorpion though which, I believe, is also KWC. Review coming soon! Still can’t find the Springfield Mil-spec Over here either and that’s at the top of my wish list. Thanks for watching!

[@JC-kc1qi]

Taiwan is an awesome country

[@b.p.stimemachines2327]

They sell an adapter that allows you to screw into your female threads that gives you a male threaded extension that I believe is the common thread for most airsoft or not Airsoft air gun moderators like I can take the moderator off of my Diana Chaser and screw it under that pistol or you can always make your own moderator it's an air gun make it out of PVC pipe and fiberglass or just shred it up T-shirts

[@brorjordas1979]

I really do not like Swizz Armz items.. mainly because of their "branding policies", or whatever you'd call it.. But IF wanna do SwArms - then a bright finished KWC 1911 lile this surely would be the way to go... I do own a suppressor by SA - but luckily that can for some reason is totally lacking any kind of branding - even though seen the exact same product later on, but featured with massive bright white lettering...😂

[@JC-kc1qi]

Murder gloves

[@brucejnemeth]

yawn