Switch-Pros SP-9100 Power Panel Setup

Here is the amazing Switch-Pros SP-9100 power panel. I thought that I'd do a run through of the many different settings on this unit.
To order the SP-9100 or the mount seen in this video for the '17+ Raptor, '15+ F150, and the '17+ Superduty, please visitswarfworks.com/shop?olsPage=p...

[@CalMariner]

Dude, thank you so much! This is the video they need, and the questions we all want answered in juicy, excruciating detail.

[@SwarfWorks]

CalMariner hahaha you’re welcome! I think.

[@CalMariner]

@@SwarfWorks oh, definitely genuine gratitude. As an engineer, watching :90s SEMA interviews and a couple pages of basic instructions are rarely enough to give me the info I need before I can pull the trigger on something.

[@qbagcal]

Thanks for the tutorial! Like your setup on the Raptor!

[@rlj151]

Bought the sp9100 for Tacoma last year. Just got an f150, now I know where and how I will mount it with your mount. Awesome, thanks.

[@sixshooter4570]

Wow, really cool video. Thanks for sharing this as it's very informative.

[@JeffC1]

Super helpful. Thanks for making this one!

[@KILLER_BEAN_UNLEASHED_FOREVER]

Nice And Clean Explanation 📟👌👍

[@Mall_Crawling_X]

thanks for the video, i was confused on how to have my lights all turn on at the same time, i'll try the master switch when i get home

[@eglonewolf]

Top video, more curious about the mount you have printed though, I have a ford escape(its a Kuga over here :)) and was wondering if that would fit and replace the sunglasses holder in the overhead panel?

[@rjansandland4256]

Great video, very thorough! Is the SP-9100 compatible with 24 volt systems?

[@tonyfajardo3003]

Great video. Very informative. How did you wire your LP9s? I understand they have a wire for a backlight, low power and high power and apparently the low and high power wires should not be powered at the same time. Thanks for any information or clarification.

[@Dpix1990]

Awesome video! Can you make it so that lights go on and off with high beam? Or only on or off?

[@PepeDeezNutz]

Cool

[@aqua.scape69]

Can you explain how you ran the wires to the point where it’s located now in the glasses holder?

[@Brighton_Lal]

Can you make a video of how to wire the actual lights to the switch pro? I'm a little confused about this process

[@devonhanchey3410]

Just curious if you ever did a video of the install/wiring of the sp9100 on the gen 2?

[@matthewflores5216]

Where did you mount the bracket in the engine compartment?

[@Army4Runner]

Very nicely done. Just curious (as I’m considering buying a Super Duty), does this still work on trucks that have sunroof controls? Not 100% sure if sunroof controls deletes the sunglasses holder where this would install. Thank you Sir!

[@SwarfWorks]

Howdy! Thanks! So it’ll work on ones with or without the sunroof. My Raptor in the video has a sunroof.

[@donovan007007]

How about a video showing you guys wiring one up.... we’ve seen enough app videos until we are blue in the face. I want to see video of connecting all 8 accessories to the solid-state unit and what it entails. Or at least show the wiring and where it sits in the engine bay.

[@SwarfWorks]

donovan007007 I could do a video of that. Mine is pretty custom with distribution blocks and stuff. The under-hood connections are very straightforward. Connect black to ground. Big red wire to positive on battery. Connect output 1 to x, and so on. When I made this video, there wasn’t a single video out there showing what I show in this video.

[@picksixtodahouse]

SwarfWorks can you guys also show how to install the switch pros mount in the sunglasses holder?

[@CalMariner]

Just google "how to butt splice"

[@BrianGlendenning]

I'm curious where you get the signal for" ignition on" from.

[@Baseksquared]

A video showing where you got the “ignition on” signal would be incredibly helpful! Thank you!

[@kennethmillets2995]

Is there any warranty with this product?

[@greg.ocallaghan]

Can you use one button on the switch pros as a master switch for let's say, 3 of the other outputs? I have 5 LP6's on a light bar, two of them amber, two of them white in driving combo, and the middle one white, in a spot. I'd like to be able to turn them on individually, but also all 3 groups at once. So ideally I'd have one button for the amber ones, one button for the white driving combo's, one button for the white spot, and one button to turn them all on. Possible? Or does the "master" button have to be one of the outputs that it is controlling?

[@JeepTJay6]

So I just got my 9100 this week and I’m starting to experiment with programming. I’m hoping you can tell me if this is possible: Single tap = -bumper lights on Double tap = -bumper lights on -windshield light bar on Final single tap = -everything off. Can this be done with a single button? I’m assuming if it can, that button would need to be associated with one of the higher amp double wire circuits from 5 to 8 right?

[@brianz3835]

I saw when you dimmer the lights, they were flickering. Is that visible or only on video？

[@apablo09]

Can I use this with a Auxbeam switch gang?

[@Nicolas_Frank04]

Don’t they send you a label sheet to label each button?

[@caseyiovieno7959]

Are the oem aux switches required to use this?

[@SwarfWorks]

Casey Iovieno Nope they are not. This should also work in any F150 and up.

[@lovethemetals5164]

My four left switches have the back light on but the four on the right are not on. How do i turn on the back light on the panel for the four that are off. Hope this makes sence

[@SwarfWorks]

Love the Metals I think I understand. I would contact Switch-Pro directly. Sounds like there might be an issue with yours. I have never seen that.

[@MarkVenzon]

What LED lights are you using on your raptor?

[@SwarfWorks]

Mark Venzon the 4 main big ones are Baja Designs LP9’s.

[@lllll7949]

You should make one for f150

[@SwarfWorks]

Lll Ll this will fit the 2015+ F150 and 2017+ SuperDuty trucks. As long as you have the factory sunglasses holder that pops open.

[@picksixtodahouse]

SwarfWorks what do you recommend to remove the 3D print lines? Sanding?

[@SwarfWorks]

Pistol Panda yes. If you search for sanding/finishing PLA, there are tons of resources out there. I personally think the lines blend in real good with the truck.

[@picksixtodahouse]

SwarfWorks cool I’m excited to try it out. I ordered mine from off-road alliance

[@HerbieSchwartz]

How do you remove that overhead console (Raptor with upfitter)? Is it all just clips or are there bolts somewhere?

[@SwarfWorks]

Steve Brightman Hi Steve. It just pulls straight down. There are 6 or 8 clips around the edges. Just get your fingers between it and the headliner and pull straight down. It’s kinda scary the first time.

[@HerbieSchwartz]

@@SwarfWorks thanks for the quick reply. Appreciated.

[@SwarfWorks]

Steve Brightman you bet! Anytime!

[@jaredwelden8926]

Is there any plans on making this to fit an iPhone for the guys using their phone as the controller for their ezLYNK? This would be perfect

[@SwarfWorks]

Jared Welden let me check. The iPhones might be a bit too big unless I can get creative 😊

[@jaredwelden8926]

Sounds awesome, I just held my iPhone X up to my holder and it might be tight but I think it would fit

[@Robert8455]

That's a pretty sophisticated switch, so thanks for the walk through. The capabilities are very cool but the setup interface seems 1980's klunky though with those loading screens showing percentages to two decimal place accuracy. I suppose once you get it setup you'll not mess with it but still. The mount looks very cool but looks like it might need some sanding to get it smooth. I see the just the switch is selling on Amazon for $299 but you're charging $250 more. That's a lot of handling fee unless I'm missing something. :-)

[@SwarfWorks]

I’m thinking whoever is selling them on Amazon is totally not legit. That’s cheaper than I can buy them for.

[@SwarfWorks]

Yeah that Amazon listing was that price for one day. Now it’s back to the correct price of $550. Someone must have made a typo or something.

[@Briebabcock8052]

Would this controller work led emergency lights?

[@SwarfWorks]

Stephenie Grenoble yes most definitely. The strobe feature can be programmed to automatically strobe when you press it once. I have it so you have to double-tap it.

[@Zaclira31]

Interested in purchasing a switch-pros mount from you. What’s the lead time on getting it shipped and is black the only color it comes in?

[@SwarfWorks]

Zachary Lira I have them in stock. Black is all I have right now. I made a gray one but it’s not a perfect match to the light gray ford color. Pretty close, but not as good as I was hoping for. I can do green, yellow, red, and pink too! 😂

[@Zaclira31]

SwarfWorks haha nice color choices. I have the tan colored headliner and plastic piece. I’ll just order a black one from you tomorrow morning. The fit on the raptor looks amazing. Will it have the same fit on a 2018 F150?

[@SwarfWorks]

Zachary Lira yes it’ll fit the same. I have an F150 overhead console and besides the upfitter switches, it’s the same.

[@Unaidedcoyote]

I just installed one in my Tacoma and I can’t get the Bluetooth to show up in the app...

[@SwarfWorks]

One time I couldn’t connect but it was my fault. I had entered the manual programming method (using the SP itself). I probably could have let it time out, but I just unhooked the main power for a few seconds and reconnected it and showed right back up.

[@jimahwaha5046]

Hey do you have instagram i have an idea and I would like to show u and see if you can 3d print for me

[@SwarfWorks]

Jim Ahwaha you bet! @swarfworks on Instagram

[@TurnDriverSide]

You don’t get any funny interference having you ham radio wired up to the switchpros?