We show you an efficient and safe way to clean your Octane 9HD www.swrsuppressors.com
Пікірлер: 58
@VanillaGorilla03514 жыл бұрын
why is it important/necessary to align the baffle cuts? wouldn't a mix of alignments slow down the gas more? same theory as making sure the gas rings on an ar15 bolt are not lined up.
@swrsuppressors12 жыл бұрын
@ChimeraPrecision We currently don't have plans for any of the H.E.M.S. series, but if we do come out with new models, you'll know! And thank you, glad you loved the video!
@AggiePhil9 жыл бұрын
Would have been nice if the video had addressed cleaning without an ultrasonic cleaner as many of us do not own one.
@irlbabayaga6 жыл бұрын
Get one. If you can afford a can you can afford an ultrasonic cleaner.
@Bobdixon_Moonvarga_Dancer_III5 жыл бұрын
viperbo21 horrible lazy answer, thanks for nuthin
@chriscontact58575 жыл бұрын
Frieght Horbour sonic cleaner
@swrsuppressors12 жыл бұрын
@boricuaDV that's a good idea. I'll throw it in the mix for things to implement into the videos. And yes, you're correct, this is the newest Octane 9HD.
@swrsuppressors11 жыл бұрын
You can orient the keyways however you would like, however you will see optimal performance if they are all aligned.
@jdmart822 жыл бұрын
So I can't remove the end of my suppressor it's stuck. Only used it 1 time I tried the key but it's stuck I have the octane 9 2.0
@swrsuppressors12 жыл бұрын
Yes, we still service them and we still sell mounts for the Trident 9.
@kheirzcass57734 жыл бұрын
How can i buy that i am here in the phillipines?
@swrsuppressors11 жыл бұрын
That part is permanently attached to the suppressor tube. No need to remove it for cleaning. Thanks.
@andrewlambert72463 жыл бұрын
No manufacture seems to include steelwool in their silencer designs.
@DimaProk3 жыл бұрын
Question: if I am planning to to use it on Ruger PC9 carbine do I still need piston? I've seen suppressor with a different configurations.
@chriscontact58575 жыл бұрын
Still the best pistol silencer made by silencerco. I prefer the 2.0 version made by Rugged and Dead Air. Obsidian and Ghost respectivley.
@silentanddeep4 жыл бұрын
Any thoughts about using simple green instead of purple? Supposed to be aluminum friendly?
@eskymo3011 жыл бұрын
I have the Octane9 HD and I love it, I have tried it on a SR22, and a colt AR22, It worked well with both, but, I leave the 22lr shooting to my Sparrow, which by the way is the most awesome 22lr can that you can buy that's on the market. My question to you is, do I have to line up the baffles? or can I rotate them 180 from each other? Which by the way some cans do reduce the decilbles a little by doing that.
@Conk10211 жыл бұрын
With everything disassembled and looking at the muzzle end of the tube, there is a piece that looks like a ring. This piece appears to be separate from the tube and while looking inside the tube, it would be where the last piece of the stack rest against. Is this a pressed on fitting? or does it unscrew? Reason I ask is for extra cleaning purposes. Thanks...
@btb60116 жыл бұрын
You did not show how to clean the tube and more importantly, wear the booster parts ride????
@swrsuppressors12 жыл бұрын
@WhiskyTangoFoxtrot33 We have started shipping. Your dealer/supplier should have details on where they're at in line for getting some.
@millwrightdad37534 жыл бұрын
Thank God I purchased an ultra sonic cleaner at Walmart yesterday
@nhatinhluong52632 жыл бұрын
Very good
@jawadhaseebi1094 жыл бұрын
Your video is very goof
@EPC-ue2ci9 жыл бұрын
how would i clean it if i dont have that tub to put it in? use the stove and a pot?? also what is the solution in the water? i cant understand you clearly in the video
@chriscontact58575 жыл бұрын
Frieght Harbour sonic cleaner.
@moaed61m354 жыл бұрын
ياريت يكون مترجما للغة العربية،،وشكراجزيلا،،،،
@haidermohammed68164 жыл бұрын
ياريت والله حتى نعرف من وين نكدر نشتري
@JPEBeard11 жыл бұрын
Can you buy a flash suppressor end cap for the Octance like you have for the Saker? Thanks,
@guiliartorres40942 жыл бұрын
como ago para agarar un supresor demi beeaman 1358
@ChimeraPrecision12 жыл бұрын
any chance for a new h.e.m.s or gs-40 this year? loved the vid by the way
@MrBernabeflores4 жыл бұрын
Where can I get the part that leads from inside
@robpardee10 жыл бұрын
What is the solution that the baffles are put into? Can the tube also go into the ultrasonic to clean the area where the piston goes? Mine is still in NFA Jail but I'm hoping any day now due to the faster processing of the e-forms.
@bp96812 жыл бұрын
Would this unit work well on a 22LR? I already have a trident9, but getting another 9mm suppressor I could *also* safely use on a 22LR and not fill it up would be awesome. Id get a "spare" 9mm can and a 22LR can all in one :)
@Raiderusmc112 жыл бұрын
I have a trident 9 are you still selling back ends for them or servicing them if something is wrong?
@WhiskyTangoFoxtrot3312 жыл бұрын
Great vid! Are the new CTA models shipping yet?
@swrsuppressors11 жыл бұрын
its ok to use in moderation. Not to use frequently
@chriscontact58575 жыл бұрын
Frieght Harbour sonic cleaner if you dont have one.
@swrsuppressors11 жыл бұрын
No end caps available for the Octane series. The suppressor itself is an effective flash hider for handgun ammunition.
@jakubf60554 жыл бұрын
what is thw wall thickness of baffle ? what is the mass?
@adnanavci59782 жыл бұрын
Hi. How much
@Cjz_backup8 жыл бұрын
I heard 50% purple power and 50% water which u can get purple power at walmart
@dixinormus32828 жыл бұрын
Use "Awesome" that yellow shit they sell at the dollar store, that shit cleans everything lol thats what i use
@MarceloPereira-ll4go3 жыл бұрын
Lindo
@PesMobile-oj5iz4 жыл бұрын
Hello friend, I want to buy one of these, do you send it to Brazil?
@jairoalmeidamatos13514 жыл бұрын
Manda um desse para mim
@joshv069 жыл бұрын
My expansion baffel is stuck :(
@RSagmiller9 жыл бұрын
+joshv06 Contact Silencer Co customer service, there is a upgrade available for that part for free.
@max.kbcadegelo.84507 жыл бұрын
👍👍👍
@user-op9js4do7o4 жыл бұрын
Grann?
@sergiovalerio81884 жыл бұрын
do all octane 9 come with a piston?
@jawadhaseebi1094 жыл бұрын
Hi bro
@user-wm7xm7zb5t4 жыл бұрын
ขอราคา
@vickieth68686 жыл бұрын
now just get your nice ultra sonic cleaner that you have. Don't have a ultra sonic cleaner? Then use a high power laser instead. It still looked pretty dirty to me. They should just say clean it like the firing pin on a AR. That damn smooth ramp is always a pain.