Sysmac NJ/NX and Compact Logix Ethernet/IP Communication

  Рет қаралды 5,969

Code Canuck

Code Canuck

Күн бұрын

Пікірлер: 7
@GreybeardGeek
@GreybeardGeek 3 жыл бұрын
Very helpful, thank you. One nit to pick: You should always use the CPS instruction instead of the COP instruction when working with I/O buffers, to prevent invalid data if an I/O packet is sent or arrives while the COP instruction is running. The CPS instruction locks the source and destination memory areas to prevent interference from message traffic, I/O packets, or higher-priority tasks. CPS is otherwise identical to the COP instruction.
@anthony54720
@anthony54720 2 жыл бұрын
Is it possible to exange string datas between nx102-9000 and compactLogix ? And how can I do it please ?
@rancid11999988
@rancid11999988 2 жыл бұрын
Yes but Rockwell does strings differently than Omron
@reylepiten3722
@reylepiten3722 4 жыл бұрын
Is it possible for omron CJ models?
@charliedosh6163
@charliedosh6163 4 жыл бұрын
nope
@rancid11999988
@rancid11999988 2 жыл бұрын
Absolutely. The datalink is made by network configurator though, not Sysmac. CJ1W-EIP21 cards or the built-in EIP work fine and require the 4 byte offset.
@zaifengchen5135
@zaifengchen5135 Жыл бұрын
Session #2: Networking Basics - Sysmac Studio Online Training
1:27:16
Chase Myles - Omron Automation
Рет қаралды 18 М.
Omron NXIO with an Allen Bradley PLC. EIC-202
4:53
Code Canuck
Рет қаралды 1,6 М.
How to Connect to a Cisco Switch Using Putty (CCNA)
27:23
David Bombal
Рет қаралды 353 М.
Omron Sysmac Studio Array of Bool To Array of Byte Conversation
11:28
Comunicación Omron - Siemens por Ethernet/IP
18:44
IES Cavanilles ARI
Рет қаралды 8 М.
Pavone Systems DAT1400 Ethernet IP communication Tutorial
11:47
SCIGATE TECHGUIDE
Рет қаралды 197
How to dataexchange between SYSMAC controllers via EtherNetIP
15:44
Omron Industrial Automation EMEA
Рет қаралды 8 М.
Omron Sysmac Studio TCP IP Communication
10:47
Girish c
Рет қаралды 4,1 М.