頭髮越洗越癢?【DIY山茶花洗髮皂】幫你溫和洗淨頭皮

有的人天天洗頭，可是洗完後還是會癢
有可能是清潔頭皮時用了過於刺激的清潔用品，所以才會越洗越癢
這次小編請到了我們城乙的手工皂達人－板橋門市店長
來教我們做一款『DIY山茶花洗髮皂』
材料成分很單純，泡沫細緻、起泡力強、好沖洗、有清潔感
快來看看有哪些材料吧！
💚 準備材料
山茶花油 ----------------- 250g
杏核油 --------------------- 130g
椰子油 --------------------- 120g (冬天結凍預先加熱溶解)
棕櫚油 --------------------- 200g (冬天結凍預先加熱溶解)
氫氧化鈉(試藥級) ---- 103g
水 ---------------------------- 248g
精油 -------------------------- 20g (可加可不加)
✨ 山茶花油對秀髮的修復力相當好、保濕性也相當高
✨ 杏核油主要是針對頭皮敏感、發炎肌膚都很適合
💚 DIY步驟
1. 將油品加熱攪拌均勻，加熱至60-70度後，等待降溫至40度左右
2. 將氫氧化鈉(試藥級)＋水溶解，溶解後會升溫近百度，必須等待降溫至40度左右（大約等待15分鐘）
3. 慢慢的把「水的部分」倒入「油的部分」，一隻手倒．一隻手攪拌，緩慢混合攪拌均勻
待稍稍有點稠度，好像要稍微費點力時，可加快攪拌速度，10分鐘快，10分鐘慢，間接攪拌
4. 持續攪拌待呈現畫8字痕跡不會消失時(如下圖)，就是皂化完成的階段
此時即可加入精油攪拌均勻 (默數300下) 然後再攪拌均勻即可入模
5. 將矽膠模型放入保麗龍箱或鋪了毛巾的紙箱（幫助保溫並持續皂化），入箱後在入模，入模後用厚紙板壓在上方吸濕，再用膠帶封住紙箱
6. 2-3天後可脫模，脫模後再晾皂約2-3周，總之就是持續晾皂至退鹼（PH值8-9）即可拿來用囉～
💚小編使用心得：
毛躁髮代表：使用時覺得髮絲有點澀，但吹完頭髮後反而很順，感覺很適合不喜歡天天洗頭的朋友d(`･∀･)b
細軟髮代表：使用三天後覺得瀏海不太容易出油，持續使用感覺對頭皮不錯～
更多細節請看連結內文
www.meru.com.tw/product.php?pid_for_show=5812
▋【MERU城乙化工】一起愛上DIY
官網看更多：www.meru.com.tw
參加臉書抽獎：bit.ly/2RlvEus
追蹤IG：bit.ly/2QPN6YI
歡迎來電訂購：[phone]
LINE訂購請至官方帳號搜尋：城乙化工
LINE訂購：bit.ly/2AdabKn

[@Traditional_Soaping]

自古以来，亚洲女性就用山茶油来保持头皮和头发的健康！ 所以我真的很喜欢你做的山茶油香皂！감사합니다!💕💕

[@meru]

謝謝您的支持與喜愛，希望下一次的配方，能提供給您更好的DIY體驗。

[@user-rm7op8yv9u]

油和水混合時，兩者溫差建議不要超過5度

[@sinjielin1147]

油和水混合時，兩者之間溫差建議不超過5度

[@meru]

🎁 2019/4/28(日) 前參加活動就有機會獲得：【DIY山茶花洗髮皂*1】 　 🎁 參加活動3步驟： (1). 訂閱城乙化工的頻道 (2). 按讚分享這部影片 (3). 留言回答問題：油和水混和時，兩者溫差建議不要超過幾度？ 　 🎁 貼心提醒： (1) 2019/4/29(一)隨機抽出1位幸運得主，抽到的幸運兒，小編會以留言通知並公佈得獎名單，請獲獎的幸運兒於2019/4/30(二)午夜12點以前回傳姓名、(郵遞區號)地址、電話，小編才會將獎品寄出。 (2). 如收件資訊有誤或無人收件導致退件，將取消得獎資格。 (3). 本公司保有修改活動內容與解釋活動權力。

[@karthus520]

可以教一下如何去除衣服上的霉斑嗎？感謝！

[@meru]

@@karthus520 可以試試過碳酸鈉喔！ 實測影片：kzbin.info/www/bejne/j6C9nGmZmNmmra8 過碳酸鈉這裡買： www.meru.com.tw/product.php?pid_for_show=4392 其他影片：kzbin.info/www/bejne/p56Qp62wormqrNk

[@karthus520]

@@meru 感謝回覆

[@fzcindy50]

先訂閱再提問😀，請問：山茶花是不是苦茶油？感謝！

[@meru]

您好 我們另有販售苦茶油，歡迎您參考，謝謝。 www.meru.com.tw/product.php?pid_for_show=3446

[@calvinchua9819]

请问可以同时洗身体和洗脸吗？ 想做给男性长辈。他们通常不喜欢沐浴露和洗发液，也懒得分类，通常都一块肥皂洗全身。

[@meru]

因山茶花油有護髮之用途，所以把這款手工皂定位在洗髮皂 但是依成分來看，用在洗身體、臉手、全身也沒有不行 其實每款手工皂都是依個人膚質去決定是否適用喔

[@user-rr7zr6xk5k]

請問如果用酪梨油甜杏仁油做發照可以嗎

[@meru]

建議按配方成分、用量製作。 如有更動使用成分，均需以您自行實測成果為主，謝謝。

[@hoiyanlam6467]

請問這款洗髮皂會產生皂垢或需要適應期嗎？

[@meru]

您好 每個人的體質、髮絲狀態等皆不同，因此可能出現適應期或皂垢。

[@meiwei651]

请问这个recipe是给多少ml的器具？

[@meru]

您好 此配方總量約1050~1070g不等

[@faithherbs7496]

Thanks a million ton thanks a ton always please do write in English also u will have so many viewers .

[@meru]

Thank you for your compliment

[@user-ub4im7qc2h]

最近才看到這個影片 我用手動打皂40分 是正常的嗎?這款皂是不是很難打, 40度打不起來最後溫度上升50度 才有 trace

[@meru]

依小編經驗，如是純手工攪拌，無用自動攪拌器，手速穩定且保持一定溫度下，至少1-2個小時以上。

[@minleeliao4574]

請問是不是很難trece 我打了約80分鐘還有杏核油可用胡桃油嗎

[@meru]

1.依小編經驗，如是純手工攪拌，無用自動攪拌器，手速穩定且保持一定溫度下，至少1-2個小時以上。 2. 如要更換油品，需自行重新計算皂化價。

[@faithherbs7496]

Please write the ingredients list in English

[@meru]

Material preparation material Camellia Oil----------------- 250g Almond oil 130g Coconut oil --------------------- 120 grams (freezing and heating in winter) Palm oil --------------------- 200 grams (freezing and warming in winter) Sodium hydroxide (test grade)---- 103g Water---------------------------- 248g Essential oil -------------------------- 20 grams (can be added or not added) 💚DIY step 1. Heat and stir the oil evenly. After heating to 60-70 degrees, wait for the temperature to cool to about 40 degrees. 2. Dissolve sodium hydroxide (test drug grade) + water, dissolve it and heat it near Baidu, then wait for the temperature to cool to about 40 degrees (about 15 minutes) 3. Pour the “water part” slowly into the “oil part” and then pour it with one hand. Stir in one hand, mix slowly and mix well Waiting for a little thickness seems a little laborious, can speed up the stirring speed, 10 minutes faster, 10 minutes slower, indirect stirring 4. Continue to stir until the agitation trace does not disappear (as shown below), which is the stage of saponification completion. At this point, you can add essential oils and mix thoroughly, and mix evenly to get into the mold. 5. Place the silicone model in a foam box or towel box (to help keep warm and continue to saponify). After entering the box, place it in a mold, place it in a mold, press it onto the plate to absorb moisture, and then seal the carton with tape. 6. After 2-3 days, the mold can be demolded. After demolding, the soap is allowed to dry for about 2-3 weeks. In short, continue to dry the soap to alkaline (pH 8-9).

[@mayhuang6843]

你好，我做出来不是纯白色，请问是什么原因？谢谢🙏

[@meru]

您好 本配方成品實際顏色偏米白色，非全白。 請問您的配方均使用城乙販售材料嗎？ 歡迎您加入LINE@官方帳號(@syb1803x)，提供您的製品照片，以便為您確認看看，謝謝

[@user-kp9ri1no3v]

請問一下所以洗髮皂不能用來洗身體或臉手、全身嗎？

[@meru]

因山茶花油有護髮之用途，所以把這款手工皂定位在洗髮皂 但是依成分來看，用在洗身體、臉手、全身也沒有不行 其實每款手工皂都是依個人膚質去決定是否適用喔

[@user-kp9ri1no3v]

城乙化工 了解了！謝謝您的回覆解答

[@user-lf8pp6iy1k]

5度

[@user-mt9px9ze1d]

這個洗了頭髮會乾燥嗎？頭皮會油嗎？

[@meru]

1.本身皂體不含矽靈，所以頭髮不會有順滑感喔 2.這款皂不會使頭皮出油。

[@user-hj6uw8jp1l]

請問精油的用量是多少，有比較推薦的精油嗎？

[@meru]

您好~精油添加量20g (可加可不加),小編當時選用：薰衣草精油+迷迭香精油 供您參考詳細配方說明網址-山茶花洗髮皂 配方www.meru.com.tw/product.php?pid_for_show=5812 謝謝

[@tinawang688]

請問如果要做液態肥皂 這個配方 有需要改變嗎

[@meru]

您好~ 若要製作成液態皂需重新計算氫氧化鉀及水的分量

[@user-zb1ml1di6l]

請問晾皂紙箱要封起來嗎，還有要放室內或室外呢

[@meru]

封箱後建議放通風陰涼處，避免過熱過溼。

[@user-zb1ml1di6l]

@@meru 您好，脫膜後也是放在厚紙箱中嗎，要封起來嗎

[@meru]

脫模後一樣放在紙箱封箱作晾皂，直至退鹼（PH值8-9）即可拿來用。 (在晾皂時可覆蓋上紙巾，幫助吸收水氣)

[@user-zb1ml1di6l]

@@meru 謝謝您

[@faithherbs7496]

Please write in English also

[@meru]

Material preparation material Camellia Oil----------------- 250g Almond oil 130g Coconut oil --------------------- 120 grams (freezing and heating in winter) Palm oil --------------------- 200 grams (freezing and warming in winter) Sodium hydroxide (test grade)---- 103g Water---------------------------- 248g Essential oil -------------------------- 20 grams (can be added or not added) 💚DIY step 1. Heat and stir the oil evenly. After heating to 60-70 degrees, wait for the temperature to cool to about 40 degrees. 2. Dissolve sodium hydroxide (test drug grade) + water, dissolve it and heat it near Baidu, then wait for the temperature to cool to about 40 degrees (about 15 minutes) 3. Pour the “water part” slowly into the “oil part” and then pour it with one hand. Stir in one hand, mix slowly and mix well Waiting for a little thickness seems a little laborious, can speed up the stirring speed, 10 minutes faster, 10 minutes slower, indirect stirring 4. Continue to stir until the agitation trace does not disappear (as shown below), which is the stage of saponification completion. At this point, you can add essential oils and mix thoroughly, and mix evenly to get into the mold. 5. Place the silicone model in a foam box or towel box (to help keep warm and continue to saponify). After entering the box, place it in a mold, place it in a mold, press it onto the plate to absorb moisture, and then seal the carton with tape. 6. After 2-3 days, the mold can be demolded. After demolding, the soap is allowed to dry for about 2-3 weeks. In short, continue to dry the soap to alkaline (pH 8-9).

[@cindyctk76]

杏核油是Sweet almond oil吗？

[@meru]

不是哦~ 杏核油 Apricot Kernel Oil www.meru.com.tw/product.php?pid_for_show=3434 甜杏仁油 Sweet Almond Oil www.meru.com.tw/product.php?pid_for_show=3432

[@cindyctk76]

@@meru 可以用sweet almond oil 代替嗎？我買錯了。

[@meru]

建議您按照我們的配方製作，這是我們有實測過的配方比例~ 因每款油品的皂化價均不相同 如更換成分，可能會影響配方成功與否 若要更換油品，須請您自行重新計算、調整成分用量 並小量自行先測試成果

[@cindyctk76]

@@meru 好的。谢谢

[@sp035118]

不能超過5度

[@noplantravelyaping2439]

没有温度计😭

[@meru]

歡迎參考 bit.ly/3nWvB7V

[@sandraantoniohuber8160]

Please recipe in English Thank

[@meru]

Camellia Oil ------------- 250g Apricot Kernel Oil --------------- 130g Coconut Oil --------------- 120g (Pre-heated and dissolved in winter) Palm Oil --------------- 200g (pre-heated and dissolved in winter) Sodium Hydroxide (Reagent Grade) ---- 103g water -------------------- 248g Essential oil ------------------ 20g (can be added or not added) 1. The oil part: Heat and stir the oil evenly, after heating to 60-70 degrees, wait for the temperature to drop to about 40 degrees Different oils are easy to stratify, so it must be mixed evenly by heating and stirring, the speed of saponification will increase, and there will be no problem of oil-water separation 2. The water part: Dissolve Sodium Hydroxide (Reagent Grade) + water, the temperature will rise to nearly Baidu after dissolution, you must wait for the temperature to drop to about 40 degrees (about 15 minutes) The smell is a little choking during the dissolution process, so remember to wear a mask The temperature of the above oil and water are reduced to about 40 degrees, the difference between the two is preferably not more than 5 degrees, to avoid oil and water separation, instability, and saponification will not easily fail 3. Slowly pour the "water part" into the "oil part" with one hand. Stir with one hand, mix slowly and mix well The key to mixing is "temperature" and "uniform", and in rapid mixing, it may be uneven, so at the beginning, it is necessary to stir slowly When it is slightly thick and requires a little effort to stir, you can speed up the stirring speed, 10 minutes fast, 10 minutes slow, indirect stirring 4. Continue to stir until the trace of the 8-character of the painting does not disappear, which is the stage of completion of saponification At this time, you can add essential oil and mix well (300 times), and then mix evenly to enter the mold (Editor's choice: lavender essential oil, rosemary essential oil) 5. Put the model into a cardboard box covered with towels (to help keep it warm and continue to saponify). After inserting the mold, press the thick cardboard on the top to absorb moisture, and then seal the carton with tape Make sure the model is completely dry, because the water vapor will oxidize the soap Hands must not be wet, so be sure to wear gloves when removing 6. Can be demolded after 2-3 days. After demolding, let the soap dry for about 2-3 weeks, wait for desalination (PH value 8-9), and then use it Can be covered with paper towels when drying soap to help absorb moisture When testing the PH value, you need to use the bubbles that come out to test to be accurate

[@sandraantoniohuber8160]

城乙化工 Thank youuuuuu 🌹🌹🌹🌹

[@cindyctk76]

山茶花油是Neem oil 吗？

[@meru]

不是哦~ 山茶花油 Camellia Oil www.meru.com.tw/product.php?pid_for_show=3448 苦楝油 Neem oil www.meru.com.tw/product.php?pid_for_show=3444

[@user-dm1bj1nb1z]

5度 臉書名字：莫凡 想請問一下，在哪裡分享呢？fb?line?

[@user-dm1bj1nb1z]

還有就是洗完需不需要再用檸檬潤絲？

[@meru]

@@user-dm1bj1nb1z 如果髮質本身受損嚴重易糾結的類型，建議在使用潤絲。 請公開分享在FB，謝謝

[@user-dm1bj1nb1z]

@@meru 已分享，FB名稱：莫凡

[@user-ck1tt3lm6h]

不要超過5度

[@user-cq4vq3rc9d]

不要超過5度。

[@user-wb3qe6st7m]

5度 FB臉書名稱：王雯雯

[@arulexport2701]

Total waste. Pls write in English n talk to English also We can not able to understand ur language Thank u

[@meru]

Camellia Oil ------------- 250g Apricot Kernel Oil --------------- 130g Coconut Oil --------------- 120g (Pre-heated and dissolved in winter) Palm Oil --------------- 200g (pre-heated and dissolved in winter) Sodium Hydroxide (Reagent Grade) ---- 103g water -------------------- 248g Essential oil ------------------ 20g (can be added or not added) 1. The oil part: Heat and stir the oil evenly, after heating to 60-70 degrees, wait for the temperature to drop to about 40 degrees Different oils are easy to stratify, so it must be mixed evenly by heating and stirring, the speed of saponification will increase, and there will be no problem of oil-water separation 2. The water part: Dissolve Sodium Hydroxide (Reagent Grade) + water, the temperature will rise to nearly Baidu after dissolution, you must wait for the temperature to drop to about 40 degrees (about 15 minutes) The smell is a little choking during the dissolution process, so remember to wear a mask The temperature of the above oil and water are reduced to about 40 degrees, the difference between the two is preferably not more than 5 degrees, to avoid oil and water separation, instability, and saponification will not easily fail 3. Slowly pour the "water part" into the "oil part" with one hand. Stir with one hand, mix slowly and mix well The key to mixing is "temperature" and "uniform", and in rapid mixing, it may be uneven, so at the beginning, it is necessary to stir slowly When it is slightly thick and requires a little effort to stir, you can speed up the stirring speed, 10 minutes fast, 10 minutes slow, indirect stirring 4. Continue to stir until the trace of the 8-character of the painting does not disappear, which is the stage of completion of saponification At this time, you can add essential oil and mix well (300 times), and then mix evenly to enter the mold (Editor's choice: lavender essential oil, rosemary essential oil) 5. Put the model into a cardboard box covered with towels (to help keep it warm and continue to saponify). After inserting the mold, press the thick cardboard on the top to absorb moisture, and then seal the carton with tape Make sure the model is completely dry, because the water vapor will oxidize the soap Hands must not be wet, so be sure to wear gloves when removing 6. Can be demolded after 2-3 days. After demolding, let the soap dry for about 2-3 weeks, wait for desalination (PH value 8-9), and then use it Can be covered with paper towels when drying soap to help absorb moisture When testing the PH value, you need to use the bubbles that come out to test to be accurate

[@user-kk1qs8pr9j]

油和水混合時，兩者溫差建議不要超過5度

[@user-lo3jw6sd1t]

油和水混合時 兩者溫差建議不要超過5度

[@meru]

黃小月 您好，恭喜您得獎~ 請加我們好友~ 並私訊回覆收件者的：姓名、電話、郵遞區號+地址 加好友連結：youtu.be/addme/GHnPDxALY65jWt21zGhq8d8Busz10A 請於4/30(二)11:59 p.m.前回覆私訊，才能順利的收到禮物歐~