Tacklife Laser Distance Meter REVIEW

  Рет қаралды 36,106

JohnyTechReview

8 жыл бұрын

product link: www.amazon.com/gp/product/B0132JJSXK
- Pretty accurate, just measure a 1 ft distance and also my ceiling compare to actual measurement
- Easy to calculate area, volume. Also adding and subtracting distance was possible
- Bright white backlit screen, easy to see, goes off in 30 seconds
- Changeable reference level which comes in very handy in tight spot
- Operates on 2 AAA batteries which were included
- Tripod thread for mounting was a big bonus for those who need to have accurate measurement
Please LIKE this video if you found it useful. It will greatly help me.
SUBSCRIBE to see future review videos :).
Follow me on social networks
Facebook: Jtechreview
Twitter: ninjaducksauce
#jtr

Пікірлер: 28
@novicgoer891
@novicgoer891 2 жыл бұрын
It does the job. Excellent product.
@thalesfeitor
@thalesfeitor 8 жыл бұрын
Thanks!
@ammosingh5899
@ammosingh5899 6 жыл бұрын
Is there a continuos function where it is measuring all the time? I.e you have something that need to go to an exact position on a wall and you have got the measurements already and you want to mark it out
@Joop175
@Joop175 8 жыл бұрын
I want feet and inches so 6ft 2 inches. On your measurement it says 6.22 feet, what does that relate to in feet and inches?
@fiveooooo
@fiveooooo 7 жыл бұрын
I cannot go into the calibration routine , someone can help me ? I've tried with the procedure shows into the owner manual, without results
@donnyrankin7256
@donnyrankin7256 4 жыл бұрын
Couldn't understand you, but thanks for the pretty pictures.
@armorvestrus4119
@armorvestrus4119 3 жыл бұрын
They measuring tool works great.
@carpentercontractorjitendr8500
@carpentercontractorjitendr8500 4 жыл бұрын
What is products name
@yokechye
@yokechye 8 жыл бұрын
is it possible to switch off the sound? I have the same device too
@JohnyTechReview
@JohnyTechReview 8 жыл бұрын
+Yoke Chye Koh I don't think so, I didn't see anything in the menu for it. I guess it didn't bother me enough.
@yokechye
@yokechye 8 жыл бұрын
+JohnyTechReview can't find it as well. thanks! great video
@fiveooooo
@fiveooooo 7 жыл бұрын
I think that your problem is easy to resolve: open the device and search the buzzer ( it can be like a metallic disc or like a little cilinder, usually black ) remove it or cut the link on the electronic card
@CaptainRon1913
@CaptainRon1913 6 жыл бұрын
The big hanging question for all these reviews is, is it accurate? I'll figure out how to use it, I just want to know if it's accurate. These low effort reviews just to get a free device, are tiring.
@1man_topo
@1man_topo 5 жыл бұрын
Mine after 3 years is 40cm off. And i don't know if i can fix it because is fixed error
@armorvestrus4119
@armorvestrus4119 3 жыл бұрын
Yes, they work great. I just got the orange and black Tacklite 40 meter model and it is better than the user. What I mean is most people will just hold it freely in hand and shoot lines but for best accuracy fix it where it cannot move and it will beat even a steel tape measure.
@lucasafelly
@lucasafelly 3 жыл бұрын
Hi, how i clear the data?
@MrCarlos31188
@MrCarlos31188 7 жыл бұрын
would it also work outside?
@armorvestrus4119
@armorvestrus4119 3 жыл бұрын
Yes, very well under low light conditions. These are dead on accurate if fixed in place before measuring. I am getting the 60 meter tripod model that comes with degrees. So you can do some limited range surveying with it and maintain a perfect horizontal line. You just need a common camera tripod and a plum-bob.
@flashlook
@flashlook 3 жыл бұрын
et en francais ?,?,?,?,??,?MERCI
@reyesmorales100
@reyesmorales100 8 жыл бұрын
how precise is the masurement ?
@JohnyTechReview
@JohnyTechReview 8 жыл бұрын
+carolago100 Down 1/10 inches. Seems pretty accurate to me. It also depends on the surface you're shining it to. I did some ceramic tile that were waving and found it slightly off but 1/8 of an ich but it really depends on where I point it on that tile. The laser is the exact measuring spot.
@reyesmorales100
@reyesmorales100 8 жыл бұрын
+JohnyTechReview tanks
@a5amr2
@a5amr2 4 жыл бұрын
You sound like cartel doing review hommie
@JohnyTechReview
@JohnyTechReview 4 жыл бұрын
Don't get hit place on yo homie. It's bad
@fiveooooo
@fiveooooo 7 жыл бұрын
ok, partially solved! to entry in calibration mode you must push the "unit" button , keep pressed, after push "measure" wait 2 or 3 sec, release it and after release "unit". This procedure permit to entry in cal mode , but on my device ( a 40 m distance ) not have effect .... after regulation ( +/- 9mm ) you must push unit to save the adjustment.
@1man_topo
@1man_topo 5 жыл бұрын
push the unit button and then just one time the measure button.
@abelfarkas8119
@abelfarkas8119 4 жыл бұрын
Although I don't have one, but it still looks good! I bought this years ago and have been loving it ever since! www.redghost.hu/Bosch-GLM50C-lezeres-tavolsagmero-Bluetooth-szal