This man deserves a Nobel Prize for finding a legitimate use for a white crayon.
@cadencarpenter723 жыл бұрын
😂
@StrungOutOutdoors3 жыл бұрын
🤪
@SirShoddrick3 жыл бұрын
Marines usually eat them for dessert...
@Themuskychannel Жыл бұрын
I personally think they taste the best
@dant82134 жыл бұрын
I dont even have a boat anymore but still watched and learned something from THE MAN! Your the best Matt, thanks for everything you share with us
@caseyriggs26334 жыл бұрын
Matt, I just bought my first bass skeeter it sat in a garage for 14 years it’s 1986 175 merc. Trolling motor needs some tlc and there’s some seal coat cracking on the top portion of the boat but not bad. I took it out last Sunday and it was awesome! Since I was a Junior in high school I always owned a tri hull boat, the skeeter is a whole new ball of wax! I came across your channel this last February and you’ve been nothing but inspiring!! Thank you!! 😎🎣
@davidfrank28243 жыл бұрын
I love watching someone who is a professional to do something and make it look easy. I did start to laugh when you talked about the weather. Like you I know not to try doing that in cold temperatures. Whenever I have done it I'd lay it out on the deck and let the sun beat down on it as I get the bottom prepared. I really love your tip on using painters tape to hold it in place. That's the kind of stuff that a DIY person wouldn't think of. You have to figure most DIY are only going to do this two or three times in their life. Let's face it most people when they buy a new boat these days they have this installed before leaving the dealership. I'd like how you touched on where to start. If I remember the last one I did it said 3 in from the D ring. Here in Maryland we really have a lot of different water that we are in. There's so many rivers and streams that run off the Chesapeake that in one day you could possibly beach on sand then on clay and on the rare occasion mud. For whatever reason the mud one is less frequently found or whatever reason. Most of the time whenever I need to beach it's on the sand. I rarely enjoyed your video I look forward to watching more. thanks for sharing your professional knowledge.
@stevepreston28704 жыл бұрын
I have an 87 Champion and I am always looking for DIY’s to upgrade and restore it. Keep them coming!! A live well restoration would be awesome lol 😉
@rodneygreen99684 жыл бұрын
It a Safe Investment for your boat. Also is the Sides & Corners. Many Years Ago, I saw the Keel Guards for Aluminum Boats. It would definitely help to protect them. Thanks Again Matt for the DIY Project Video.
@anothersomebody81954 жыл бұрын
Were the aluminum ones formed for the tighter angles?
@jimhalleran62394 жыл бұрын
Matt I’m new to bass boat ownership. I had planned on installing a keel guard so THANK YOU!!! Please hurry with that Marine Tex video. Please, please, please!!! I have quite a few repairs to make. You guys are the very best.
@rambo85504 жыл бұрын
I gotta thank you guys for something: My whole fishing career, I've never had the confidence to throw a big swimbait. You guys preach it so hard in your videos, so I figured I gotta give it a try. I bought a savage gear 3D bluegill in the big size, and went to a VERY pressured urban spot. I caught over 20 bass between 1-4lbs until I got broken off by a tank. I have so much more confidence in big swimbaits now!
@riverking4u3 жыл бұрын
Just spent $4,000 having my 2000 Carrera re-glassed, great timing. I beach it all the time on the river. Thank you.
@mikegardiner39344 жыл бұрын
Matt, awesome instructional video. I have not had to replace one yet, but I feel confident after watching you. That center sticky piece is a lifesaver for making sure it’s on there straight. God bless!
@jackmonkey48594 жыл бұрын
Thanks for adding the tip about where to start the guard. I wasn't able to find any information on that but your reason is sound. As usual, you guys rock!
@roderickdarjean71682 жыл бұрын
Thanks for discussing the starting point specifically the distance from the D-Ring
@maxescamilla45974 жыл бұрын
About to put one on my boat so perfect timing! Will be watching for the marinetex repair video, thanks!
@luisrosario67304 жыл бұрын
I'm a new angler and I sub to a lot of youtubers but u guys are far and above all others the best
@MegawareKeelGuardInc4 жыл бұрын
What a great video! Thanks so much for sharing your KeelGuard install Matt! We recommend applying your keel protector at least 6 inches above the resting water line. This information is printed in the application instructions.
@WilliamsonProductio14 жыл бұрын
I’m not sure if you’ve ever been to the east coast on the tidal rivers but would love to see a true tidal river video you guys explain everything so well and I’ve yet to find a actual informative video on tidal river that’s effected by the moon not a dam
@warrenharrison75964 жыл бұрын
Great timing with this video. We just started replacing our keel shield. Hard part is getting the old adhesive off.
@Jon-nz3dm4 жыл бұрын
use a heat gun! generally it's the best way to get any tough adhesives off
@anothersomebody81954 жыл бұрын
@@Jon-nz3dm gasoline gas help on the cheap side of solvents
@bradleykerswill77062 жыл бұрын
Love these DIY videos. More would be awesome as you guys come across stuff. I’m about to install a keel guard for the first time and this was helpful. Thank you!
@kedman12174 жыл бұрын
Great video Matt. What about replacing trailer bunks and best carpet to use.
@xxcaseyxxc4 жыл бұрын
You're a mind reader lol. Just added this to my cart on tackle warehouse yesterday. Thank you so much! 😎
@craigmartin71794 жыл бұрын
Love the DIY knowledge. I've been asking for this in previous videos and glad you have time to film some during your down time. I'd love to see preventative maintenance on reels if you get time. Such as oiling etc. Stay healthy.
@lunchbreaklunkers14234 жыл бұрын
Great info, once I upgrade to a bigger boat definitely going to add one of these!
@johnkoons71634 жыл бұрын
Great product, everyone that hasn't done this should, good job Tim, thanks for that. Who could be negative about this? I guess they didn't like the shirt you were wearing. Thanks Again!
@shanebrewster23844 жыл бұрын
Thanks for the video! I am in the process of installing a keel guard and the weather is not warm up here in AK. Daytime highs are around 50.. hopefully I don’t have to fight this thing or have a compromised seal. Have a better one!
@joshandhuntersadventures50464 жыл бұрын
These are worth the money great advice here enjoy all the videos you guys put out.
@mackjenkins77214 жыл бұрын
That was an awesome video man. I enjoyed that. I just found your Channel. I like the work you did. Keep up the good work.
@cg83252 жыл бұрын
I know this video is almost two years old, but great stuff. I'm interested in the Ranger I see peeking through though lol.
@trizma31624 жыл бұрын
Dude, you need to invest in being a legit teacher. your knowledge is amazing.
@MiloCrackerHead3 жыл бұрын
Is that not what he is doing with the KZbin channel? Pretty legit teacher
@MrTaylorfenoglio3 жыл бұрын
Lol what? He is literally a teacher to millions and you don't think he is a legit teacher be it's youtube? 😄
@urlastcrap19174 жыл бұрын
Sup Matt and Tim awesome Tuesday Video
@6855mike2 жыл бұрын
GOOD JOB!! Very helpful. Thanks!
@peternolan56322 жыл бұрын
Boat keel never seen it until now see it fall ... VERY GOOD ...
@tlalexander34 жыл бұрын
please make a marine tex video soon. I bought a skeeter that had some bad places on the bottom and one of the places was leaking. I took it to a fiberglass shop and they fixed all the deep stuff, but I found one spot yesterday that is a little into the gel coat and about 10 inches long that I probably need to fix. At least you can't see the fiberglass like the other areas though
@brandonsmith6064 жыл бұрын
Thank you for the great content. I've been looking at these, I would for you to talk briefly about your thoughts on the trolling motor prop nut
@barndog70824 жыл бұрын
My boat has a deep V hull and a roller trailer that contacts the V. hull. Can you tell me if the trailer might damage the keel guard?
@liamfinney14393 жыл бұрын
Nice video! Is the keel guard itself paintable? My whole hull is sanded down and I'm about to do some light repairs to the keel and am thinking of slapping one of these guards on before restoring the paint job. Thanks!
@jimquantic2 жыл бұрын
One thing I have not seen yet, how do you determine the SIZE of the keelguard strip? they come in many different lengths, the longer the strip the higher the price. 6-8 inches above the water line--but how far back? I'm thinking until the hull underside turns flat?
@BertThePilot4 жыл бұрын
@tacticalbassin have you ever seen a keel degraded and weathered in the center? No damage to the actual hull? Perhaps improper placement...anyways, any tips for removing a previous keel? And then obviously applying a new one?
@danieltaylor92362 жыл бұрын
Use black caulking on frunt and back to give it better protection and seal
@seedsoutdoors37213 жыл бұрын
I'm turning a lund 16ft into a river boat with a jet pump swap. I'm wondering if I put 3 keel sheilds on, one on the keel and 1 on either side if it it would reduce performance? It's for added protection if I hit a boulder out in the river.
@gbnomore39184 жыл бұрын
Of course 3 dorks have to give thumbs down because they would never want to get their hands dirty. They also have other guys, or maybe girlies, do their fishing for them. Nonetheless, awesome vide as always!
@heythere_kayla4 жыл бұрын
I wonder if it’d work for a kayak too. I noticed the bottom of mine is getting scuffed up from loading and unloading it / having to bank it on boat launches but didn’t know there were options like this. I’ll definitely look into. Thanks 😁
@jonathandavis354 жыл бұрын
Kayla LaFleur, I work for Megaware KeelGuard. The majority of kayaks are made out of a high density polyethylene, which is a low surface energy plastic. In other words, we do not recommend applying a KeelGuard on this type of material because it may lose the permanent bond over time. If your kayak is made out of something other than polyethylene or polypropylene, you should be fine. The 3M pressure sensitive adhesive is extremely strong and durable, but we want you to feel confident and happy with your purchase. Thanks
@bleon23684 жыл бұрын
I have a 20’ Triton TR20 and as you know the keel goes flat about 6’ back so not sure how well it is going to adhere from V-shape to flat. They are recommending a 7’ but I’m thinking 6’?? Thanks
@southerngurlfishing25614 жыл бұрын
Just installed one on my boat Saturday
@xMetalMonkiix4 жыл бұрын
Awesome video as always! Question though- My boat sits on a roller in the front is there anything I can do like get rid of the roller or alternatives for a keel guard?
@jasonriede60564 жыл бұрын
Have a couple questions you can pull your boat onto the ramp and lock your talons in place on the concrete ramp or do they need soft bottom have you ever launch your boat and use your spot lock to hold your boat while you park do you think a 18ft boat with a 200 on it needs a dual axle trailer 🤔
@zoomzoomgt4 жыл бұрын
Matty. Can you do a video on transon and a trolling motor. Whats the differences and benefits. Since bow mount cost an arm and a leg compared to a trolling motor. Thanks
@stevenburns15924 жыл бұрын
Hey fellas, Is Clearlake open or closed at this time? Trying to plan a trip up from Sacramento.
@pablorener16333 жыл бұрын
How you remove a torn keel Guard? If so is there an extra step(s) in cleaning the area before you put a new keel Guard?
@seahawks754 жыл бұрын
I was thinking about getting a Tracker grizzly is it hard to put a keel guard on one of those even though it's aluminum and would you recommend one
@fishncoach86994 жыл бұрын
Blat just did a video on this as well. Cool product
@jasonriede60564 жыл бұрын
Triton 18trx dual axle or z518 single axle trailer both have 200 I like both boats looking for some input trying to figure out what path to go down
@stevegerber8354 жыл бұрын
Awesome information. I think a creeper would help😂
@Scorch25344 жыл бұрын
Great instructions video, but to be honest, that hull damage was not bad at all. Even when there are chips and dings, most are just gel coat and not true structure damage.
@martinthefisherman4 жыл бұрын
Alright, first I need a boat!!
@joshandthejam78064 жыл бұрын
Do you have to prep the surface on aluminum as well?
@jonathandavis354 жыл бұрын
Josh and the Jambo, I work for Megaware KeelGuard. Prep the surface on the aluminum the same way you would if your hull was fiberglass.
@tlalexander34 жыл бұрын
Also, do you have any tips about the surge brakes on that trailer? I see the tongue is all the way back like mine and the brakes on my EZ loader trailer do not work. I don't have any brake fluid in the reservoir, so I might have a leak somewhere. Everytime I take off from a stop the trailer jerks pretty hard on my truck since it is sliding.
@cameronhershberger.4 жыл бұрын
I bad the same problem and just ended up welding it so I doesn't slide since I drive a tundra and don't really need brakes. Love not feeling the thump every time I speed up
@Crawford5154 жыл бұрын
Get stuff Matt love the diy....vids
@nawinchester4 жыл бұрын
Is this a fiberglass hull only product or does it work on aluminum Hull boats ? I have a high end deep v aluminum that I've wanted to protect but have heard keel guards don't work on aluminum hulls.
@jonathandavis354 жыл бұрын
Nick Winchester, I work for Megaware KeelGuard. An aluminum boat would definitely benefit from the KeelGuard. The adhesive does not have any issues adhering to the aluminum. However, if your boat has any complex welds or rivets, it's not recommended to apply over them because it wouldn't achieve a full surface bond. Depending on the manufacturer/model of boat, some have welds that do not pose issues. We installed one on an aluminum Ranger RT198P because the welds were not very raised and there have not been any issues with the guard sticking. Thanks
@cjfourty64 жыл бұрын
Matt acting like we can just go and buy alcohol, bruh that shit is like unicorn blood these days lol
@zoodidwa4 жыл бұрын
Funny...B-Lat just did this on his channel too.
@nathanbutcher18644 жыл бұрын
what about acetone? I feel like it would take more gunk and road tar off the bottom
@antoniocalo42134 жыл бұрын
Thank you so much!!!!
@pablorener16333 жыл бұрын
Do you have a video on removing a torn Keel Guard?
@SkyGuy321004 жыл бұрын
Might be stupid question but can you put this on like a old 16 ft aluminum Lund boat ? Or this only for like the nice ass boats?
@jonathandavis354 жыл бұрын
RedManReed, I work for Megaware KeelGuard. An older aluminum boat would definitely benefit from the KeelGuard. The adhesive does not have any issues adhering to the aluminum. However, if your boat has any complex welds or rivets, it's not recommended to apply over them because it wouldn't achieve a full surface bond. Depending on the manufacturer/model of boat, some have welds that do not pose issues. We installed one on an aluminum Ranger RT198P because the welds were not very raised and there have not been any issues with the guard sticking. Thanks
@charlieboutin33414 жыл бұрын
Thanks, great to know! I’ll research this. Do you know if it works on plastic? I have layers of duct tape on my kayak keel 😂 Have a great one Tactical folks! 🎣. Best wishes!
@chrismortenson96084 жыл бұрын
Any chance they make these for Kayak’s? Thanks, Great Video.
@jonathandavis354 жыл бұрын
Chris Mortenson, I work for Megaware KeelGuard. The majority of kayaks are made out of a high density polyethylene, which is a low surface energy plastic. In other words, we do not recommend applying a KeelGuard on this type of material because it may lose the permanent bond over time. If your kayak is made out of something other than polyethylene or polypropylene, you should be fine. The 3M pressure sensitive adhesive is extremely strong and durable, but we want you to feel confident and happy with your purchase. Thanks
@chrismortenson96084 жыл бұрын
Jon Davis Thanks John, Is there a product that would work on a yak. We run in some rocky areas here in Nevada and beach them a bit. Just wondering man. Thanks again for your reply.
@Eddieb7074 жыл бұрын
Think my aluminum boat would benefit from this guard?
@anothersomebody81954 жыл бұрын
I was told the keel guard's angle is too tight for the adhesive to hold. I'd also be interested if they make something for aluminum boats.
@jonathandavis354 жыл бұрын
Eddieb14 I work for Megaware KeelGuard. An aluminum boat would definitely benefit from the KeelGuard. The adhesive does not have any issues adhering to the aluminum. However, if your boat has any complex welds or rivets, it's not recommended to apply over them because it wouldn't achieve a full surface bond. Depending on the manufacturer/model of boat, some have welds that do not pose issues. We installed one on an aluminum Ranger RT198P because the welds were not very raised and there have not been any issues with the guard sticking. Thanks
@TheFishdoctor19524 жыл бұрын
How long did it take to install the keel guard on this boat, start to finish? I'm guessing the hardest part (for this boat) was the sanding of the hull.
@tacticalbassin4 жыл бұрын
Start to finish, including filming, was an hour and 5 minutes. It's really not hard to do.
@joshholt15134 жыл бұрын
I think you need some more boats in the driveway.
@mth20684 жыл бұрын
Quick question, how long should you go with? I have 21 ft boat.
@tacticalbassin4 жыл бұрын
Definitely the 8' 👍
@wjroutdoors40793 жыл бұрын
do you need to sand if its a new boat
@skeeterboy774 жыл бұрын
about to do this to the new rig.. Crossing Fingers.. Lol
@bryandedon74594 жыл бұрын
Please sell me your boat. I'd love to find a champion for sell in great condition. Greatest boat ever
@richardrivera58954 жыл бұрын
respect
@ismaelhuizar69634 жыл бұрын
Hi Matt good morning I got a question jerk bait Jackall Rerange 130 That’s good for the strippers
@dalelattanzio98004 жыл бұрын
Ok, I’ve watched almost all of your videos but you need to help me with the nitty gritty. I’m relatively new at this but after a day of fishing my thumb is torn apart and bloody. Also I noticed that after you and Matt cast you pull your line out near your reel seemingly to tighten something. Why? So how do I protect my poor thumb. There has to be a way. Dale
@jasond42454 жыл бұрын
I guess I really haven't noticed them pull out line. That's just to pull out a little extra line to keep the bait from penduluming back towards the boat when it hits the water.
@joshholt15134 жыл бұрын
As jason said it puts slack in the line so the bait will fall vertically. Also it makes sure there are no loops on your spool from the cast.
@jasond42454 жыл бұрын
Let's see a video on chine walking. Not sure if your champion does it but my triton likes to walk
@BorneoFishStation4 жыл бұрын
Same for aluminum boat?
@TN_MuskyAddiction4 жыл бұрын
No...a lot of them have a ridge up the keel. If yours is a vee with no joint or ridge then yes its the same.
@anothersomebody81954 жыл бұрын
I was told the keel guard's angle is too tight for the adhesive to hold. I'd also be interested if they make something for aluminum boats.
@jonathandavis354 жыл бұрын
Otterlee Artward, I work for Megaware KeelGuard. An aluminum boat would definitely benefit from the KeelGuard. The adhesive does not have any issues adhering to the aluminum. However, if your boat has any complex welds or rivets, it's not recommended to apply over them because it wouldn't achieve a full surface bond. Depending on the manufacturer/model of boat, some have welds that do not pose issues. We installed one on an aluminum Ranger RT198P because the welds were not very raised and there have not been any issues with the guard sticking. Thanks
@jasperjones11534 жыл бұрын
Should I put one on a aluminum boat
@anothersomebody81954 жыл бұрын
I was told the keel guard's angle is too tight for the adhesive to hold. I'd also be interested if they make something for aluminum boats.
@jonathandavis354 жыл бұрын
Jasper Jones, I work for Megaware KeelGuard. An aluminum boat would definitely benefit from the KeelGuard. The adhesive does not have any issues adhering to the aluminum. However, if your boat has any complex welds or rivets, it's not recommended to apply over them because it wouldn't achieve a full surface bond. Depending on the manufacturer/model of boat, some have welds that do not pose issues. We installed one on an aluminum Ranger RT198P because the welds were not very raised and there have not been any issues with the guard sticking. Thanks
@gboat774 жыл бұрын
Lots of videos showing the install but after taking my old keel guard off I know why there aren't any showing the removal LOL.
@bradley71354 жыл бұрын
Do I need a keel guard for a aluminum boat
@anothersomebody81954 жыл бұрын
I was told the keel guard's angle is too tight for the adhesive to hold. I'd also be interested if they make something for aluminum boats.
@jonathandavis354 жыл бұрын
EZPZ fishing, I work for Megaware KeelGuard. An aluminum boat would definitely benefit from the KeelGuard. The adhesive does not have any issues adhering to the aluminum. However, if your boat has any complex welds or rivets, it's not recommended to apply over them because it wouldn't achieve a full surface bond. Depending on the manufacturer/model of boat, some have welds that do not pose issues. We installed one on an aluminum Ranger RT198P because the welds were not very raised and there have not been any issues with the guard sticking. Thanks
@kylelaporte99184 жыл бұрын
How do you know how what size you need
@jonathandavis354 жыл бұрын
Kyle LaPorte, I work for Megaware KeelGuard. (5' for boats up to 16' long, 6' for boats up to 18' long, 7' for boats up to 20' long, 8' for boats up to 22' long, etc) It's better to go longer rather than shorter because it'll protect further down/back of the keel. As Matt mentioned, depending on how far you pull up on the bank, more of the bottom will sit on the protector vs your hull surface. We recommend installing the leading edge of the KeelGuard at least 6-8" above the waterline on your boat. Thanks
@rafabonati77574 жыл бұрын
“We need more wind chimes”! en.m.wikipedia.org/wiki/Wind_chime. Just messin!
@johnhalchishick70943 жыл бұрын
These things are pretty expensive for a rubber guard.
@jakekeyes86384 жыл бұрын
I could have done without the several minute intro. Put that stuff at the end next time.