NEW STYLE Jeep Wrangler LED Headlights -- Install, Testing, and Review

[@thomashervieux5033]

Would like to see which fuse you would run the daytime running lights wire into.

[@EM-df6mo]

Just found your channel today. I enjoy your videos very much. No BS, just straight talk and How To's. I'm just getting into these vehicles and I hope to see more of your suggestions. Keep up the good work.

[@吕涛-g4c]

I have 2016 Jeep wrangler in Canada. I installed as above. Once I shift to drive and release the park, DRL is on( both low and high beam are on ) 😂I got a lot flash from oncoming vehicles. So I have to drive low beam during daytime.

[@pdebenedictis1]

Could you describe the daytime option in more detail?

[@4everhoustontexas]

Yes please upload a video where you install the daytimes to make it be on all the time please

[@inkledoodle6503]

Got these. Low beams (dipped in UK) were faulty and just randomly turned on and off when they were supposed to be steady on. Halo and High beam were fine. Can’t wait 2 weeks for delivery for replacement. Shame - looked good when they worked.

[@21SethG]

Great job on this video!!! Really love the tape trick for the aligning the lights! A lot of people forget to mark the original lights before removing them!!!

[@philipschutter1626]

looks great. your high beam demo really helped me make the decision. so many cheap headlights have great low beams but almost no high beams. Thanks a lot.

[@RTM459]

I’ve had these for a year and still going strong the high beam are nuts

[@philipschutter1626]

@@RTM459 thanks I have to get something better for my jk brute. Would these work in a 97 wrangler? Want to get some for my older brute as well.

[@RTM459]

@@philipschutter1626 long as they are 7 inches they should work I have a jlu and used adapters

[@sdalin27]

Nice wiring breakdown. Thanks. Putting these in my humvee build and couldn't figure out what the red wire did. Rest all checks per the bench test! thanks

[@Astigma981]

Saw this video on Tuesday, ordered, and got them today. Lights look and work fantastic. Was able to fuse tap into a fuse for the DRLs as well. Thanks for the video and review!

[@TacticalJK]

Awesome!!!

[@bsmith9781]

My lights just arrived and I want to fuse tap the DRL’s in the fuse box. Which fuse position did you place the tap. Photos or specific location is greatly appreciated so I don’t short anything out, thx!

[@Astigma981]

@@bsmith9781 I used Fuse M8, on 2018 JK.

[@robertwood7208]

Gonna be my next set of headlights for sure!

[@TacticalJK]

heck yeah!

[@rodgraves4463]

I don’t comment much on videos but yours was professional and detailed….nice job

[@TacticalJK]

Thanks!

[@mbetts1982]

Found it =) thanks. You are so right about the stock headlights. Been looking for new ones for a while.

[@TacticalJK]

Glad you found it. Good luck!

[@josephweeks3799]

Dang those look hella good. Definitely makes the Jeep stand out for sure

[@TacticalJK]

Thanks! I 100% agree!

[@carlosroxanne3187]

Ty for this vid. Bought and installed successfully !! One of the best upgrades I have done in a while. De stock lights are so bad, wow. I see the road now =D Since I live in Belgium I have an European JK (2012 rubicon) and the DRL wiring was even easier. The stock light had a mini light bulb plugged in the man light dome as DRL. Connected to red one with the positive end and everything works as stock. Realy happy with the result Thumbs up!

[@PatrickSantonastasi-tr8vj]

Do you have a video of how to hook up the daytime running lights?

[@mattbayer3986]

I bought these lights and installed them today. Thanks for the video and install tips.

[@dougcoleburn1579]

how are headlights working now?

[@mattbayer3986]

Still work great. Nice and bright.

[@dougcoleburn1579]

@@mattbayer3986 thanks! Any trouble with install? I’ve seen a few comments that they have trouble installing. Thanks

[@mattbayer3986]

@@dougcoleburn1579 I did not have any trouble. No trimming or anything like that. There is a lot of wire behind the light that had to be tucked away but that was easy.

[@dougcoleburn1579]

@@mattbayer3986 many thanks

[@InjunOutdoors]

Will consider these for sure. Not a fan of halos but might wire them to the turn signal. Just to be different

[@franciscofernandez2576]

Did I get it to work as turn signals

[@victorvigil7892]

I like those LED, headlights, great job doing your video, tks

[@njbinkers]

Just got a new to me JK Willys edition and definitely need to upgrade those headlights and that would be great if I won a set of these. Enjoyed the review!!

[@TacticalJK]

Thanks! And good luck!

[@deontisstaton]

I love how your Jeep looks!!! Mine is almost built the same way.

[@TacticalJK]

Thats awesome! Im really happy with the way its turning out😃

[@ericparisien3051]

Thanks for this! just what I needed. the instructions from the seller are so simple that they are complicated!

[@TacticalJK]

Glad I could help!😀

[@lordblazey6828]

These are sick ! How are they holding up?

[@TacticalJK]

Good so far! No issues with fading or flickering. Would definitely still recommend

[@tallgirlswagg]

Great Job. Headed over to buy them now. Ty

[@Josh-sk2xw]

I just installed a pair today can't wait for it to get dark

[@MrRfv3]

Hey I really need these lights. Thanks!!

[@longreach207]

Me too! Me too!!

[@davesbest1580]

Do I need to buy more wire for the halo lights?. Love these

[@TacticalJK]

I think they come with enough wire, but a fuse tap might be a good purchase for the fusebox connection!

[@knightrider316]

Can you give me the name & model or link to these lights. They look promising. Do you know if they make fog lights to match?

[@harrisonhartog591]

The lights don’t seem to line up in the factory mounts. Did you have to mess with it at all?

[@TacticalJK]

If its not 100% perfect, but close, you should be able to just mount the retainer ring and it should all hold up great. One notch on one of mine didn’t fit in all the way (a few mm off) but once I mounted the retainer ring everything was perfectly solid. I apologize for not mentioning that detail in the video ( I did/do not see it as an issue, but I definitely should have provided the information regardless). I hope you are able to get them working.

[@DerekGH]

How would these be in a snowy climate? I have hard that they do not generate enough heat to keep the lenses clear of snow, or frost.

[@TacticalJK]

Sorry for the late responses. They definitely don’t get hot like normal bulbs, so I doubt they could melt much snow or frost. Hopefully someone from a colder climate can chime in!

[@mr.mortadella1174]

thinking about picking up these lights. How are they holding up thus far. My last amazon halo lights burnt out .

[@TacticalJK]

No issues so far. The halos don’t seem to have dimmed any, and the lens shows no signs of fading. Would definitely recommend 👍

[@henryaquino3036]

Can you tell what brand is the headlight your'e talking about

[@dmoskk]

Those are awesome, would love to score a set.

[@TacticalJK]

Thanks! Good luck

[@miketwaddle9043]

My crappy amazon headlights stopped working not long ago! I need these so bad ! And great video to add to it

[@TacticalJK]

Thanks - and good luck!

[@josemartinez-gr1cz]

Looks good! Thanks for sharing and good job and explaining!

[@TacticalJK]

Thanks!!!!!!!

[@connorsphere]

Awesome video dude, had a lot of problems with different headlights on my Jk and I saw these lights and the price, and was kind of suspicious about them cause also saw some bad amazon reviews but they definitely look like solid lights for the price. Awesome video!

[@TacticalJK]

Thanks!

[@louisphilipppelletier9079]

It would have been nice to have a little more detailed explanation on the electrical aspect of the installation...

[@austinjames6298]

I have a 1985 Jeep cj-7. Will these work for my Jeep? Awesome video also. You earned a sub

[@TacticalJK]

Hey, thanks!! I checked the amazon listing and, according to it, they should fit👍🏼

[@austinjames6298]

Tactical JK alright, thank you very much

[@Darth_Giorgos]

Great job you did there, I really liked your video! Subscribed, hope to see more!

[@TacticalJK]

Thank you. I really appreciate it!!!

[@TheDrapoel]

How can it be that the LED ring is connected to the Blicker?

[@leonardovillalba881]

Great video pal!! I have the same lights in my tj wrangler 2004 and those lights gives my Jeep a nice touch

[@TacticalJK]

Thanks! Im sure they look great on your rig!

[@kigzter]

What do i need to install these once i've purchased them?

[@michalisGT]

Hello men, these headlights fits to my classic mini 7' inches headlights? Also do you know the headlights name to search them for Europe - Greece? thanks.

[@cobrarus1844]

Hey the one that you got black or silver?

[@TacticalJK]

They are the black ones👍🏼

[@cobrarus1844]

@@TacticalJK thanks

[@clarkrollins3629]

Have you noticed any major heat coming from the back of the headlight housing that has affected any of the Jeep wiring that is ran close to the back of the headlights once installed? I ordered a set but they fit so tight to all the wiring when pushed into mounting ring, I was thinking if they get hot it’ll melt some important wiring. As a rule, I thought LED lights produced a lot of heat that usually needs fans to cool them.

[@TacticalJK]

Hey! So I didn’t notice any issues when I took mine off a few weeks ago (to test some other stuff). I have had several 4 hr + night road trips with them on in the past few years. I don’t think they really get that hot.

[@Harveje]

Thx for the video...got mine today after backordered. ? 2015 jku passenger side fit in the bucket fine but drivers side tabs don’t want to seat in the bucket around the 10-11 o’clock position leaving a gap. If anyone has any info or pictures I’d appreciate it. Thanks again

[@TacticalJK]

Hate that your having an issue with the lights :( I would try tightening on the retainer ring over the lights , as it should hold the headlight in place regardless of the fit. It may actually force the tab into place once you get it secured. Just something to try - thanks!

[@Harveje]

Tactical JK Thanks I did that and it did close the gap a I think the back of the light is hitting either the bucket or something behind it and I can’t get a good angle to see. I’m not a fan of jeeps headlight holding, aligning, and positioning design. I do like the lights and if they hold up it’ll be worth the effort to get them to fit

[@xride05]

Great headlights . Hope to win them 🤲🏻

[@TacticalJK]

Good luck :)

[@bobl8687]

Great video. What color (hot) wire did you tap into for the Halos from the front direction/markers @ 4:39

[@TacticalJK]

I didn’t tap into the front markers on the final setup, I tapped into the fog lights b/c of the way I have my jeep programmed. I am fairly sure that I tapped into the middle wire of the markers during the shot you referenced, but it did not work great as the Jeep set off a low light voltage check engine light, so I changed it. It might could work tho, but I wouldn’t recommend that method from my experience

[@gabrielpino7521]

Do you have a video with the change of this mask? (Black and grey)

[@TacticalJK]

Hey! Im afraid I don’t understand what you mean

[@9929kingfish]

Which fuse do i need to use for day time running?

[@TacticalJK]

Im not sure... trial and error is usually the way I find out! I believe it is different for different year models. Hopefully someone else in the comments can be more helpful!

[@9929kingfish]

@@TacticalJK sorry 2 more question. Did you splice the left DRL with the right and wire one wire to the fuse box? Also, what kind of connection plugs into the fuse box?

[@Ealcantar7]

Just got mine, but they don't quite fit. Did you have to buzz any part housing to make them fit? I have a 2015 wrangler JK.

[@TacticalJK]

Hey, several others have unfortunately had this issue, where one of the tabs doesn’t exactly fall into place. The best strategy is to just put on the retainer ring. The retainer ring should hold it solidly in place regardless of the issue. Hope you are able to get them working!!

[@markpickering7451]

I got these lights for my 2016 JK. When I remove the OEM lights I can’t get the LED lights to fit into the bucket. I line up the notches that hold the housing but they don’t want to go all the way in. Yes, the lights are for the 16 JK. Any suggestions you could offer?

[@larrygawne3529]

Helping my grandson upgrade is Jeep. It has been over a year now, Are you still pleased with this headlight selection ?

[@TacticalJK]

Thats awesome! After a year, I would definitely recommend these. No lens or light fading, moisture buildup, or flickering issues. I would definitely spend the bit extra on these vs. the cheaper designs on amazon based on my experience. At any rate, headlights are going to be an awesome upgrade for his jeep!!

[@larrygawne3529]

@@TacticalJK Thanks for input. Got headlights installed and extremely pleased with performance. Clean gut off on low beams, a lot of light. We hooked up halo as just a day time light. Like the look. Bought simple fuse assembly that added a circuit to #6 switched fuse.. Easy. Thanks again.

[@90210sky]

After 2 years, are they fading or becoming yellow?

[@TacticalJK]

Nope. The jeep has been stored outside the whole time as well, so I’m very happy with that. The matching tail lights have seen a bit of plastic fading on the top

[@chriscobb4818]

Did you ever run into fogging issues?

[@TacticalJK]

Hey! I haven’t had any issues with fogging or moisture buildup inside the lights.

[@noisufnoc]

I picked these up after watching your video, and really like the look of the lights! Unfortunately they don't seem to fit very well on my 2018 JKU. Only one of the tabs in the headlight bucket/mount lines up with the LED light. I'm hoping to figure out what I can trim/adjust to make them seat properly.

[@TacticalJK]

So Sorry for the late reply!!Im sure you have the issue fixed by now, but if not the fix seems to be just putting on the retainer ring. It should balance everything out and hold it solidly in place regardless of the issue. Hope you were able to get them working!

[@dougcoleburn1579]

did you find a fix to the issue?

[@iawad5897]

Great job,, are they still working? Btw how big are your tires and how many inch is the lift kit u have on?

[@TacticalJK]

Still working great! And 35s on a 2.5in lift

[@steveb611]

How do you get just the LEDs to come on by themselves? I hooked up into the fuse box. The only time the LEDs will stay on by themselves without the headlights is when it's in neutral. Soon as you take off emergency brake the lights come on

[@TacticalJK]

Your jeep is probably set to run the main beams all the time as DRLs. That's not standard for USA jeeps, but USA jeeps can be configured that way way to fix that would be to get a JSAN tool and change your jeep's DRL setting.

[@BrhimMT]

How have these headlights preformed after you installed them? Are you still happy with them?

[@TacticalJK]

Yes, have been running them for years now and zero issues. Im really impressed with them

[@jweezy_864]

Are these dedicated to Jeeps only or do you think they’d work on other vehicles with round 7 inch lamps?

[@thefatboy__goneslim7376]

Is this an xprite 7 headlight?

[@TacticalJK]

No, this one is from Audexen. The link is in the video description!

[@coyotegray771]

How's the cut off? My LED headlights are blinding people angled as low as I can get them. I'd like to get something with a better cut off in lowbeam.

[@TacticalJK]

They have a flat cut off. You can see it well in at 5:00, where the headlights are shining against the wall. My old set of headlights had a similar issue to yours in that the low beam shined very high, as if the high beam was on all the time. These are more much better👍🏼

[@gwjr8740]

Where did you get the silver grille accents from?

[@TacticalJK]

Hey! Those are actually stock that 2016 Sahara. Im not sure if they can be bought!

[@gwjr8740]

@@TacticalJK Thanks for getting back to me! I'll have to get one for my Wrangler. How do you like the headlights? They look great! Are those the silver version?

[@TacticalJK]

Thanks! I haven’t had any issues with them since the install, so i would definitely recommend them. And those in the video are actually black version👍🏼

[@thehouse8288]

Just bought my pair

[@TacticalJK]

Hope you like them!

[@kdzenins]

Great review!

[@MrDmagic88]

This review was so good I stopped looking at the other LEDS that's was about to buy and order these instead. They be in today 😎 Thanks

[@TacticalJK]

Glad you found it helpful!

[@MrDmagic88]

@@TacticalJK unfortunately my 89 raider wouldn't power them up🤷🏾‍♂️

[@2011lafayette]

Same here , watched the video and put an order . Thanks .

[@jizhang1189]

I got this light after watch this video. installed, Lights look and work fantastic. Was able to fuse tap into a fuse Box for the DRLs as well. Thanks for the video and review! But there is a problem, when headlight switch off, Low and High beam will be on when gear is not in P position. Everything is normal when headlight switch is on position. Do you know where is the problem came from? Thanks

[@TacticalJK]

Hey! It is likely that your Jeep is set to run the highbeams as a factory Daytime running light , so it sends power to the lights when the vehicle is in drive, but stops sending power when the vehicle is parked. This is not the normal setting for U.S.A Jeeps, but jeeps in many other countries are sold with that setting to meet regulations. It would have done that with the old headlights as well, if what I am thinking is true. If your jeep is set up to run the highbeams as DRL, then unfortunately the only way to turn that setting off would be to reprogram the Jeep.

[@吕涛-g4c]

I have the same problem. 😂 now my DRL is too bright and have to switch to low beam even driving in daytime.

[@steveosman4992]

wondering how these lights are keeping up since you installed them few months back. Thanks.

[@TacticalJK]

They still are working great and looking the same. No change that I can tell

[@vinceguarino9145]

Great job on the video dude. Really well done. Just subscribed. Look forward to the others.

[@TacticalJK]

Thanks so much!!

[@freddynj6140]

How have they held up?

[@TacticalJK]

Great! Haven’t experienced fading or any other issues, so I’m very happy with them

[@tejas1090]

I am planning to buy one for my motorcycle. Will it work?

[@TacticalJK]

Here is the motorcycle version. Hopefully it has the info! amzn.to/3jq1elL

[@tejas1090]

@@TacticalJK Thanks much

[@tejas1090]

@@TacticalJK Is there any other headlight better than that? I want the best 7 inch headlight for my motorcycle.

[@jamezleeburse]

Do you know if these are available for a 2019 JL?

[@TacticalJK]

Yes they are, here is a link: amzn.to/2LtlEeh

[@randydrake2027]

I ended up buying these lights and installed them in my new 2020 JL. The stock lights were 9" and these are 7". When i put my grill back on after installing them, i noticed a 1/2 gap between the rubber ring on the headlight and the back of the grille headlight circle. It looks odd to me that they dont butt up to the back of the grille. Did i install wrong or is there another bracket that will move the lights further out so the are closer to the grille? Thanks!

[@TacticalJK]

I don’t know the answer to this, but hopefully someone in the comments can help!

[@overland_3j]

they have bracket for it, I just ordered one

[@antonioreyes7781]

Are those headlights the black or silver ? I’m looking to buy the exact ones you got on your JK

[@TacticalJK]

They are the black ones

[@wendellaustria1962]

They match your grill.

[@TacticalJK]

Right!!

[@justinbeathe552]

Great video. Very good job. Informative.

[@TacticalJK]

Thank you!

[@Hol-mes]

easiest way to run the DRL is to splice into the middle wire of the turn signal/parking light.

[@sebastiansolarr8871]

Does this fit on a 2022 jeep witout any codification or dash light?

[@duancj6738]

Hey dude,just got the exact same headlight as yours, put it on this evening, the new LED headlight seems project much higher light than the stock headlight, wondering if you had the same issue, is there any solutions? Tried the Headlight adjustment next to the hazard, still too high, there's two screws inside the headlight cup, tried, that only adjust the headlight from left to right slightly

[@TacticalJK]

Hey! So you tired the adjuster that I used at 5:00 in the video? Thats the only way I know to bring them down, but it had a ton more adjustment than I needed in my case

[@stevec899]

Great videos. I have a 2016 JKU Sahara as well and I’m definitely doing the head and tail lights. I was just looking at the 305/70r18 Coopers too. What lift did you go with and do you like the ride? Thanks

[@TacticalJK]

Hey! I have a 2.5 in teraflex lift, I believe it is this one amzn.to/3DZ0y12 . I actually moved it from my old jeep, so it has been used for over 4 years and has held up great. I think it rides good, but i dont have anything to compare it too. I wasn’t able to tell a ride difference after switching from stock, but I didn’t pay too much attention to it.

[@stevec899]

@@TacticalJK thanks man!

[@terrysmith6439]

I have a 2017 Jeep Wrangler Unlimited Big Bear. I bought these Audexen headlights and fog lights with the halo light. I had my mechanic instal them but they are not working as fully intended. He tells me it's because my lights are computer controlled. Does anyone know a way around this?

[@NunYa953]

I am not too hopeful on them lasting very long but for less than $200 its worth a shot. These people spending $800+ for a set of headlights are out of their fucking mind.

[@retiredman]

Great video.how are these lights holding up ?

[@TacticalJK]

Haven’t had any issues at all. No fading or flickering. Would recommend!

[@pdubbs85]

Hello, I installed these on my Canadian spec 2012 Jeep Wrangler. The DRL halos work when the car is in park, however, when the car is in drive the high beams come on. Any idea how to address this? Thanks.

[@TacticalJK]

Hey! You are going to need to reprogram your Jeep and change the Canada spec DRL settings (high beam) to off. You will need the JSCAN app and a Bluetooth reader (about $40 invested). Here is a great video for that. I used the JSCAN app to change the tire size and other settings on my jeep and have been happy with it. kzbin.info/www/bejne/pIK1m6Kabp6SaNk

[@pdubbs85]

@@TacticalJK Thank you! Much appreciated!

[@morF1ni]

Great review., thanks. Which fog lights would you suggest to pair with these headlights? tail lights also please? 2007 sahara

[@TacticalJK]

I made a vid on the taillights, and they are great: kzbin.info/www/bejne/fYCqeqahp9Gje8U As far as fog lights, unfortunately haven’t test any!

[@terrencelawrence5007]

Thank you for your video I push the buy it now for theses light's 😁

[@TacticalJK]

Awesome!!

[@727brianq]

The Amazon link states they don’t fit on 2013 & 2015 Wranglers. Is there a reason why they say they won’t work on those years?

[@TacticalJK]

I just read the new things on the amazon link, and I think the seller is just making a note every time someone has an issue, but idk. I don’t see a reason why it wouldn’t fit all models years since the JKs are all pretty much the exact same

[@jamesself5438]

3 years later, how have they held up?

[@TacticalJK]

Still going strong! Would definitely recommend after three years, I haven’t had any issues

[@jessylauzon8740]

You know if it's the same plug and play as the 2018 model? I want to swap these on my miata since I prefer the middle LED compare to the other model

[@joshgarcia1780]

What front bumper do you have? Looks nice

[@TacticalJK]

Thanks! Its a smittybilt XRC MOD front bumper! I made a review video for it a few years ago if your wanna check it out ( really old vid tho😬). I have been happy with it!

[@andrewl8104]

Do these fit on a 2007 Jeep?

[@TacticalJK]

Yes, I am pretty sure they do! Should fit all JKs

[@andrewl8104]

Tactical JK alright I’ll buy them I hope they fit 🤞🏻

[@socalnsx]

how they holding up?

[@TacticalJK]

Great so far. Light remains bright, no flickering, no moisture buildup, and the lens show no signs of fading even with the jeep being stored outside 24/7. No issues to speak of, so I would definitively still recommend👍🏼

[@ramonalvarez9485]

I have a 2006 liberty, do you think these will fit ?

[@blaisewilcenski9760]

Hey, these lights look sweet! Any reviews of long term use?

[@TacticalJK]

They pass by my review. Halos and headlights are still just as bright, and haven’t had any issues with fading or flickering. Hopefully someone can provide a longer-term review than mine!

[@Hotshot97]

Will these work the same way in a Canadian JLU?

[@Disagreeoragree]

What gauge wire did you use for the drl?

[@TacticalJK]

20 gauge from what I’m reading on the side of the wire. I just used what was included with the lights

[@hurleykh608]

I got these for pretty cheap and am Curious why I can’t get them straight. The middle light is slightly slanted as it doesn’t fit properly. Any tips? Great video btw

[@TacticalJK]

Hey! I am not sure about getting the straight, I only know how to adjust them horizontally and vertically. I might would try getting them aligned straight (even uf they don’t fit in the notches right) and then tightening the retaining ring down in whatever position they are in. I would think the retaining ring could hold it in place even if everything doesn’t align perfectly in the brackets. Hope you are able to get it working!!!

[@mattdudley8202]

Great video. Was wondering how they are holding up now that you have had them on the jeep for some time now. I am in need of some new lights because my current LEDs are very unreliable. I like the looks of these a lot but don't want to deal with another finicky pair. Thanks!

[@TacticalJK]

Hey! So I haven’t had any issues so far. No flickering, no fading, and just as bright as before. I’m very happy with them

[@alexmcginnis1]

Are they still working?

[@whatsthisabout100]

Do these lights cause glare for oncoming cars - I’ve previously brought led 7inch for my Jeep and despite adjusting to correct height, the light pattern causes glare and I often get oncoming vehicles flash lights at me ?

[@吕涛-g4c]

Yes, I got a lot because of the DRL is both low and high beam on

[@nicholasrodriguez2625]

Didn’t really wanna go through all the comments but would they fit a 22 wrangler jl

[@TacticalJK]

not without an adapter, they do have adapter kits though if you wanna