Taiwan Natural Fog High Pressure 1500psi Mist Nozzle Spraying

[@PeterWest70]

Always a joy watching your updates!

[@NaturalFogMistNozzle]

Hi Peter, Thanks for your compliment. We will keep up the good work! Wish you have a wonderful day!

[@nayananaik2423]

On which pump mist nozzle working ?

[@NaturalFogMistNozzle]

Hi, Thanks for your interest in our video. The pump working pressure is 1,000psi, 1 hp, total water capacity 3.6 liter/minute.

[@johnvianey6085]

Is it worth to maintain humidity. Am having mushroom house for that in need to keep humidity, how can use your products

[@NaturalFogMistNozzle]

Hi John, Thanks for the message. The nozzles are driven by high pressure water, which pressurized by pump. So you will need a pump, timer, pipes, fittings, water filter, and of course nozzles for a misting system. Drop us your further inquiry via email : [e-mail] Thank you.

[@j.ballsdeep420]

Ideally accumulator tank, electronic solenoids, millisecond timers or computer programmed relays, sufficient high pressure lines, personally a complete redundant line for your setup so your down time is detach functioning line, attach backup, and run the system while you then go to clean. Have fun and welcome to aeroponics

[@j.ballsdeep420]

If you're trying to keep humidity just go evaporative humidifiers, diy super cheap and easy, or ultrasonic but frankly far more pain in the ass to keep up without introducing unwanted biology.

[@user-pw2oy6js5j]

이제품은노즐간격 과 노즐규격이 어떻게 됩니까

[@NaturalFogMistNozzle]

안녕하세요, 이것은 테스트용이므로 각 노즐의 간격은 약 5cm로 매우 가깝습니다. 노즐 오리피스 크기는 0.20mm입니다.

[@KALYANKUMARSR]

How to purchase

[@NaturalFogMistNozzle]

Hi there, You may contact us for further details via below : 1. Email : [e-mail] 2. Whatsapp : [phone] Thank you! Sincerely,

[@a.c.i.intertenment807]

I want this

[@NaturalFogMistNozzle]

Hi, Sorry for late response! You may contact us via : email : [e-mail] Whatsapp : [phone] Sincerely,

[@ranjanperera6485]

how toby nozzle and pip

[@NaturalFogMistNozzle]

Hi, Please contact us via : [e-mail]

[@user-ul1zw6fo8q]

What’re those size of the nozzles?

[@NaturalFogMistNozzle]

Hi, Thank you for your interest in our product. These nozzles are with 0.20mm orifice, sprayed at 70bar pressure. Any expectation on the nozzles you are currently using? Contact us at the following email for an upgrade of your system : [e-mail] Team Natural Fog

[@cre8teveittechsolutions578]

What is microns of your nozzle?

[@NaturalFogMistNozzle]

Hi, Please contact us via "[e-mail]", and we would be glad to provide more detail information by PDF. Thank you!

[@nayananaik2423]

Size of each mist nozzle in mm ?

[@NaturalFogMistNozzle]

Thanks for your interest in our video and product. In this video the nozzle orifice is 0.15mm and the flow rated approximately at 0.06 L/min when taking anti-drip pressure 280psi into considertation. The fog droplet sizes ranging from 6.60μm to 26.45μm, and the majority of the droplet size falls in 11μm. Such fine fog is able to satisfy the requirement of plenty of application. For further details, talk to us via email : [e-mail] Thank you. Sincerely, Natural Fog Company Ltd.

[@Veer_tales]

What is minimum flow rate... Will it work for oil

[@NaturalFogMistNozzle]

Hi Vernon, Thanks for your message. We do have clients spraying oil-like solution by using our nozzles. But if the oil is too thick, then it might not work well. Talk to us via email below for details : [e-mail] Thanks!

[@kiranpatait3591]

Pls sand fog instrumant dite with prize

[@AboutEverythingae]

We are mist nozzle manufacturer call or whatsapp now on [phone]

[@NaturalFogMistNozzle]

Hi Kiran Patait, Thanks for your interest. Please contact us via email : [e-mail] Thank you.

[@babansaha9603]

Need mist nozzle.any agent in Bangladesh

[@NaturalFogMistNozzle]

Hi Baban Saha, Thanks for your interest in our products. You may contact us via below email : [e-mail] Thank you!

[@AboutEverythingae]

We are mist nozzle manufacturer call or WhatsApp now on [phone]

[@Coyote973]

So 10 nozzles and 103 bar, but what is the orifice size of the nozzles, lastly what is the approximate flow (l/min) ?

[@NaturalFogMistNozzle]

Hi Marko, Thanks for your interest in our video and product. In this video the nozzle orifice is 0.15mm and the flow rated approximately at 0.06 L/min when taking anti-drip pressure 280psi into considertation. The fog droplet sizes ranging from 6.60μm to 26.45μm, and the majority of the droplet size falls in 11μm. Such fine fog is able to satisfy the requirement of plenty of application. For further details, talk to us via email : [e-mail] Thank you. Sincerely, Natural Fog Company Ltd.

[@williamschukwuma1616]

@@NaturalFogMistNozzle Hello sir, kindly do you have some nozzles like 022, S1003.

[@planet2465]

Whats pump type u're used ?! Sanyo Jetpum huh ?

[@NaturalFogMistNozzle]

Actually not, we are using a local Taiwanese pump for testing ;)

[@planet2465]

How much totaly mist nozzle u're installed ? In 20 mtr pipe right ?!

[@NaturalFogMistNozzle]

This is simply one of our test lines. In this video, we installed 10 pcs of nozzle in total, but when conducting an official internal quality test, we normally apply more than 50 pcs of nozzle.

[@j.ballsdeep420]

Diaphragm pump

[@gafermd1104]

Dainik costly anta

[@ambikagreenagrotechfarm1382]

Price?

[@NaturalFogMistNozzle]

Hello, Thank you for your interest. Please do contact us for details via : [e-mail] Thank you!

[@AboutEverythingae]

We are mist nozzle manufacturer call or whatsapp now on [phone]

[@johnvianey6085]

Y

[@irfanqureshi3543]

Sar number jahiye

[@rsudsumbawa6466]

ada paketnya gk bos???

[@NaturalFogMistNozzle]

Hi RSUD SUMBAWA, Could you be more specific on the question? Thank you!

[@salihyilmaz2510]

.