Tamiya Mini 4wd Tutorial MA chassis J-Cup Body damper System Upgrade setting

This video I upgrade the MA body damper system from previous video. So the car will be lighter, stronger, improve the damper action, fast acceleration, better brake system, and smooth transmission.
--------------------------------------------------------------------------------
Here is my previous video of this setting
• Tamiya Mini 4WD Tutori...
---------------------------------------------------------------------------------

[@ayzrock]

thanks for the video sir mad tang!! more power!

[@kristianecyrus6213]

This is a fantastic video! Appreciate your work and sharing. One suggestion: Can you make your other video links available in the description instead of embedding it into the video? When I watch your video and see the box to your other new videos, I wanna click on it to open just so I can watch it later (coz it's not in your description for me to click on later). However, I click on it and it'd immediately take me to that vid, without allowing me to continue in the current video. Cheers. Thanks again.

[@spectorpfm4985]

Wow this looks exactly like my build but mine has a rear sliding damper and front Anchor system

[@rsebayang1218]

Hi bro i've seen a lot of your build tutorial I wonder how they performed on tracks specially for MA chassy

[@arkhamassylum4090]

how about making best setting to the track that use 1 or two jump ramp...coz i get really problem on that..

[@wilbertyuen]

May i know if you need to cut the chassis to fit those wheel? Because i think those narrow wheels are not fit for MS or MA chassis?

[@Gohjunyi88]

Mad Tang , May I know if u used reinforce wheel shaft or hollow shaft for speed technical track ?

[@samuelfang3073]

hey Tang, noticed it's been a while from your last video, don't know if you still check the comments. I once recorded the url you posted in video of where you get the dremel. from the video i found it very useful. would you pls give me the link again of the website? i can't remember which video you mentioned it. tks

[@jemnuelpagdanganan484]

can you make a video about body lantern setup?

[@MrMoonP]

It seems the front body damper system became popular, actually what is the difference between the front system and back system?

[@julianpermana1882]

which one is better, large diameter wheels with trimmed arched tires or large diameter wheels with super hard large tires item 95374 ?

[@Te-CaHobby]

Hi Sir is this body damper can work for MS Chassis also ? Thanks

[@arkhamassylum4090]

for ar chassis of course...thx mad tang..

[@BeneTyVLOGS]

do they allow 8 rollers in the states?

[@MadTangmini4wd]

nope~~ only open class~~ Tamiya class always 6 rollers only

[@ronrafael6606]

nice

[@vincecatacutan6783]

Mad Tang can you make a video for super fm chassis? tnx

[@yuklipgaming]

Hi Mad Tang, Do you have full list of parts in this? I want to try this build.

[@gilgamesh7540]

Agreed

[@manongcebulifer]

did you glue brake foam in your brakes?

[@MadTangmini4wd]

I didnt put any brake at back yet~~ due to brake setting have to depend on track layout~~ need a lot of adjustment~~ but prefer Sponge brake~dont glue on the back. just put it on, let the sponge foam stay on the FRP for 20-30 minute~ adhesive need at lease 20-30 minute to dry out. so it can stay on the FRP tied

[@jerkjerk5597]

hi mad tang what is your custom tires size 26.5 or 27 thx for answer

[@MadTangmini4wd]

my suggestion is no bigger than 26.5mm, 26mm is the standard size for low profile style~ also small size will have less rubber (Less rebound) ,

[@jerkjerk5597]

Oh!! thx for answer my idol i hope you happy all day.

[@tonychu3154]

Have you showed a video on how to install the damper system with 2.0 hollow propeller shaft yet? If so can you tell me with video it is. Thanks!!! XD

[@MadTangmini4wd]

kzbin.info/www/bejne/iHykaaqdfKmFoac

[@菠菜鱼]

hey Mad Tang where are you from？

[@MrNGZoro]

HIhi....先多謝你的分享!!!你的分享給了我好大幫助!!! 想問一問以上的影片當中車的setting 是不是比較適合速度軌??

[@MadTangmini4wd]

恩 比較適合有一定速度的技術賽道. 落地至少要有2節直道緩衝

[@MrNGZoro]

如果軌道比較多上落斜我可以怎樣做一個break setting ?? 而上落斜的高度有3至4層！ 我想send軌道的圖給你但不知道怎樣做！

[@MadTangmini4wd]

Ryan LEung 一般來說拉~ 如果跑道都是以高速路段為主~~ 然後部分路段有SLOPE 然後SLOPE 的落地緩衝 至少2節以上直道的話~ 前面不需要裝海綿煞車. 但是前面一定要有拖地的頂軌距離地面1.2-1.5MM之間~~這樣可以讓車遇到ＳＬＯＰＥ的時候提早煞車～如果前面已經裝了海綿煞車　建議用TAMIYA MINI 4WD LOGO 的 TAPE 包起來~~ 煞車是一門很複雜的學問 置於如果SLOPE 疊好幾層~~其實根本不用怕～　基本上　當你爬到　第三層的時候　速度幾乎已經大幅度下降了～　只要做好基本的抗震　就可以～～

[@MrNGZoro]

好的，我會嘗試你的提議！！好多謝你教我咁多 另外如果我想用HG carbon 黑金雪條棒做一個提架但我無足夠的機器做一個切割，我想問你有什麼提議？用扇剧做一個人手切割可以嗎？

[@MadTangmini4wd]

用扇鋸切割就夠了~~ 我這個影片上的 提架就是設計給扇鋸切割的~~ 對於沒有專業工具的玩家 這個提架設計非常簡單易切割

[@arlong0405]

MA的提丁架只有一個洞來延長丁丁和前輪的距離會不會移位呀？

[@MadTangmini4wd]

影片裡面我已經說明了~~ 用手用力去轉 當然會動~ 但是車正常在跑 不管多猛烈的跳躍 只要用防鬆螺絲鎖緊 是絕對不會移位的. 但是一定要用防鬆螺母鎖緊. 一般在日本,台灣 地區 原件自改都是用這種單孔...尤其是日本 KZbin上很多日本玩家分享自己提殼車的影片 都是我這種單孔 除非猛力撞擊 或者 你用手用力去轉 不燃絕對不會移位 (其他的請自行體會)

[@raymondlam1486]

可以教Ar提架嗎?

[@carloangela9505]

wath kind of engine is that. stock

[@MadTangmini4wd]

+carlo angela the motor is depend on track layout and your setup~~ so i just put stock motor there for filling up the motor compartment .

[@carloangela9505]

+Mad Tang thank you sir

[@KD-rc1fq]

how do you cut polycarbonate cowls like rowdy bull,festa jaune car type for a body damper ?

[@s1001021]

這車多重?

[@MadTangmini4wd]

這只是基礎教學~~跟重量沒關係~ 如果你問我多重, 這車現在這情況 至少140克(不含電池) 重量控制 這是更高階段教學 未來才會考慮做~ 因為重量控制 輕量化 也要考慮到強度~

[@selamatdatangkeduniaamru]

Sdc apa sto itu

[@gerryfederiz8411]

Hi sir can you sponsor me same of your kit not using tamiya 😊

[@MadTangmini4wd]

I only use tamiya

[@ronrafael6606]

lil