Tamiya TT02 RWD conversion with 3d printer(타미야 TT02 RWD 컨버전)

Tamiya TT02 RWD conversion kit link : www.cgtrader.com/3d-print-mod...
This is Tamiya TT02 RWD conversion video with 3d printed parts.
When printing parts, the loading direction on the bed is also very important, so please keep that in mind.
I'll tell you the various parts you need and how to assemble it in detail.
Necessary parts(필요 기자재)
M3 nut(너트)-21pcs
M3 countersunk bolt(접시머리나사)
6mm-4pc, 10mm-14pcs, 20mm-2pcs, 25mm-2pcs, 30mm-2pcs
M2wrench bolt(렌치볼트)
8mm-2pcs
M3 wrench bolt(렌치볼트)
8mm-6pcs,12mm-12pcs,15mm-2pcs,16mm-2pcs,18mm-2pcs
dia 15mm, thickness 3mm magnet(자석)-4pcs
www.aliexpress.com/item/10050...
3mm shaft-cut to use(샤프트-길이만큼 커트하여 사용)
30mm-4pcs, 50mm-4pcs
www.aliexpress.com/item/10050...
630 flange bearing(플렌지베어링 outer dia 6mm, inner dia 3mm, thickness 2.5mm)-12pcs
www.aliexpress.com/item/10050...
4.8mm joint ball(조인트볼)-9pcs
www.aliexpress.com/item/10050...
4.8mm balljoint cap(볼조인트캡)-16pcs
www.aliexpress.com/item/10050...

[@zeusgarage4368]

Check out Tamiya TT02 RWD conversion project(타미야 TT02 RWD 컨버전) : kzbin.info/www/bejne/iXrCpYGOhJWBj6M

[@coonogaming2040]

멋있으십니다! 화이팅하십시오!

[@ripmax333]

This is Awesome! I have a spare TT-02 which I can easily do this mod, TT-02 chassis aren't that expensive nowadays, you can buy a complete in a bag aswell. Thank you! Keep them coming!

[@zeusgarage4368]

Thank you.🤗

[@ripmax333]

@@zeusgarage4368 are the files available or it's still work in progress?

[@likris7481]

Nice mod video!. I will try.

[@zeusgarage4368]

Thanks a lot.🤭

[@user-rh6dq9ef5n]

Been waiting for this, amazing. But from what I’ve seen your 3d printed parts have over-extrusion, u might want to lower down the flow

[@zeusgarage4368]

Thank you for your comment. I will correct it next time.😂

[@juancarlospulidoperez2617]

Como puedo descargar los stl

[@ivandelavalle]

what suspension? 50mm or 55mm?

[@ComputerfirstComputerfir-fb8vl]

Is this kit compatible with tt02d? or just tt02?

[@user-jj2ws6td3t]

👍👍

[@zeusgarage4368]

Thank you.🙂

[@andreasklein4018]

Material? Pla or pla+

[@danielbujna9302]

Hi. Is it possible to print and change only high angle steering and keep the rest stock? Thank you.

[@zeusgarage4368]

yes. It's possible, it's in the first half of the video.

[@brunosantos9637]

Nice work as allways.Here can i get the files to print?ThankYou.

[@zeusgarage4368]

Thank you. I just upload files at cgtrade. Download link is above.🤗