Рет қаралды 183
This video shows the manual controls you can make on the RDS controller with your 1400 V bale wrapper
00:05 Start the controller
00:16 Switch from AUTO mode to MANUAL mode
00:21 Close the loading arm
00:26 Open the loading arm
00:30 Lift the loading arm
00:40 Lower the loading arm
00:46 Open the cutter
00:49 Close the cutter
00:53 Turn the wrapping arm forward
01:02 Turn the wrapping arm backward
01:11 Close the linkage bar
01:16 Open the linkage bar