Рет қаралды 219,972
In this restoration of a tap wrench I remove rust using rust remover and sandblasting, apply powder coating, use an easy and effective way to apply paint to relief, bluing some parts and cut threads. Not that much equipment was needed for the restoration, powder coating was an especially fun part.
▬ What did I do ?! ▬▬▬▬▬▬▬▬
The disassembly was done quickly, because I had to remove only 3 screws. I then blasted all the parts in the sandblasting cabin, using corundum as the abrasive. With a file I restored the "grip" of the screws. With bluing (hot bluing) I protect the screws from corrosion. On the other components, from the antique tap wrench, I applied powder coating and then melted it in the oven. I resharpened the tap with sandpaper and smeared it with oil. After reassembly, I was still missing a rod as a handle, I made this right away with the old antique tap wrench.
▬ Good to know ▬▬▬▬▬▬▬▬
I used the following tools: file, sandblasting cabin, corundum abrasive, cordless screwdriver, sandpaper, tap, rust remover spray, rust remover, powder paint, powder coater, oven, pliers, isopropanol
▬ Do you want to support me? ▬▬▬▬▬▬▬▬
Would you like to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you see and you want to help the channel to develop continuously? If you want to support me you can donate via Paypal: www.paypal.com/donate?hosted_...
or use the following affiliate links:
Material for work:
Thread Cutter: amzn.to/34R6nxp
Propane Blow Torch: amzn.to/2TGxskB
Rust Remover Spray: amzn.to/3ikixH6
Rust Remover: amzn.to/33rKF2q
Sandpaper - different grit: amzn.to/3haK5hs
Blasting cabinet: amzn.to/33rgJDB
Blasting abrasive: amzn.to/3jCifKQ
Powder Coating: amzn.to/3lJifeD
Isopropanol: amzn.to/3s1CYLO
Equipment:
„Camera“: amzn.to/3h8qSND
Ring lamp: amzn.to/3nWjh68
Microphone Rode: amzn.to/3nYYVck
Affiliate links don't cost you anything, I just get a small share from the seller, you have no disadvantage from it.
▬ Did you like it? ▬▬▬▬▬▬▬▬
Did you like the video? Then like, subscribe and please share it!
Many Thanks!