PRO TIP: Never guess at a corner. I measure 10 inches from one corner, make a mark... Then measure from the other side to that mark. Much more accurate than guessing.
@MineEngineer8 жыл бұрын
Well then obviously add ten to the measurement.
@1Camoguy8 жыл бұрын
+Logan Wyatt Thanks for the tip :)
@ecstaticbanana10638 жыл бұрын
That's a great tip! Thanks for sharing. Cheers
@PaulLadendorf8 жыл бұрын
+Logan Wyatt Depends what you're doing. If you're installing drywall, then its ok to guess.
@DrDocDRM8 жыл бұрын
I've always used the +10 ( or + whatever measurement works best). I also use a KM stick if I have to take several measurements against inside corners: KM= Known Measurement. Take a good solid piece of any material that you can easily carry with you and cut to appropriate known measurement (10", 1', 3', etc.), place the KM stick into inside corner and measure to the end of the KM stick from the opposite target, add the the KM stick length and there's your measurement. Especially excellent when working under house/crawl space/in attics/etc. I frequently used KM sticks (PVC pipe pieces) as long as 10' for measuring to distant foundation walls when prepping under-home vapor barriers.
@joshuaanthony37818 жыл бұрын
Black diamonds--->Truss layouts... I never use them laying out trusses (mainly because I'm a custom builder not a track home builder and I very rarely use trusses). It was used to lay out 5 trusses per an 8'span. 96" divided by 5 is 19.somethung... Also that's an awesome trick with the layout in 4 equal parts by using any number divisible of 4 on a diagonal.... When the vid first started and u said 99.9 % of us would learn I thought man I've been swinging a hammer longer than I've been walking with my dad, what's he gonna show. Sure enough u taught me something...
@joshuaanthony37818 жыл бұрын
Did this comment post, is anybody out there. Can u read this, because every time I went to sent the comment it said 'There was a problem sending your comment'...So, I'm just curious if it posted. I've only left positive comments in his comment section I wouldn't think he would block me....???
@jgrayskating8 жыл бұрын
+Joshua Anthony Nope, everything seems to be fine :)
@richardrhodes96618 жыл бұрын
+Joshua Anthony GO PANTHERS!!! none of our guys will get to go to the probowl, what a shame!! LOL
@joshuaanthony37818 жыл бұрын
+richard rhodes...yes, such a shame...lol
@richardrhodes96618 жыл бұрын
was that an ass whippin? not sure,,,
@newfoundselfreliance65478 жыл бұрын
I also think the fat max tapes are the best , they are so much easier to read than most . Black diamond is for truss sheeting , and the red numbers are for stud spacing . I also liked that you added the ruler and yard stick . I find them of great use for small jobs around the shop . Thanks for the video
@jackfordmac8 жыл бұрын
This is what my ilfe has become, watching a man see how far he can extend a tape measure.
@mattfairfield91036 жыл бұрын
jackfordmac this may be a little late but this comment made me laugh, like.... hard xD hahahahaha
@jonathanbailey49046 жыл бұрын
You and me both, brother!
@shawnofdadead18054 жыл бұрын
As a life long construction worker, its a past time of mine too...
@thelastpilot45828 жыл бұрын
A Carpenters Pencil should be sharpened to a flat chisel point so it thin to draw lines but broad to avoid snapping on rough timber that is why it is that shape. I learnt this as an apprentice back in the 50's.
@stefanhoffman73956 жыл бұрын
If you can be consistent with your method, go right ahead. If not then it needs correction. Otherwise let it be. I've manged a lot of green horns and it sounds like you are just micro managing. If you are looking at pencil tips im guessing you either arent getting much done or you are just repeating some horseshit from shop class. Do what works for you. Lower your nose.
@rogerdickinson9204 жыл бұрын
You are correct, Mythbusters did a program on that. 14 to 1 before sharpening...something like that.
@rogerdickinson9204 жыл бұрын
You are not correct and out of line sir.
@droddy2hottie8 жыл бұрын
Of the hundreds of videos I've watched from you, none have been as eye opening as this. I laughed when you said 99% of us would learn something but I immediately had to put my foot in my mouth. Well done, brother!
@wranglerstar8 жыл бұрын
+James Droddy Thank you
@orien2v24 жыл бұрын
Just sharing. First thing I was taught was measuring ceiling height. If you turn the tape and measure from the floor up along the internal wall corner, you can just slowly extend it to raise it up to the ceiling to get a rough height. This can work for up to 12' ceiling depending on your eyesight though. If you want accurate height just do that firsts and mark a certain height at eye level, then come down from the ceiling so they both meet at the mark and just add them up. I'm sure there are better ways but this has worked for me all along.
@450tallis8 жыл бұрын
Being in the electrical trade for 16 yrs now, I have found the Stanley Fat Max to be the most preferred by the younger generations including myself. The old school journeymen will still use the folding rules as well. I was given one awhile back and keep it in my tools to use around live parts if needed, or to copy an angle of a bend. I would simply fold to the existing angle and use it as a jig of sorts if a protractor is not feasible in the area. I have also been a big fan of the classic Stanley, just plain reliable. I did learn something, the slot for the screw or nail heads.... nice. Cody, I'm a big fan! Great work, and thank you for being an inspiration, and encouragement in an ever darkening world. My wife is a big fan of Mrs. W as well.
@ecleveland18 жыл бұрын
It's amazing, we could have grown up in the same house. I learned and did the same things with tape measures when I was a kid. I still remember my dad teaching me about tapes and rulers and how to treat your tools.
@whollylostandgone8 жыл бұрын
Been a carpenter/drywaller/cabinetmaker for 7-8 years, your tip on getting four equal pieces just blew my mind! Black diamonds are for engineers joists. Also drywall tip for you, never put your joint at the end of a header. Its much easier to put a full 4 foot sheet up and cut it out, and then your tape joint is part way into the heaver and will not crack. Thanks another great video.
@leekollar32988 жыл бұрын
I've been doing remodeling and construction for some time now and... MIND BLOWN!! Thanks for another great video Cody!
@synlawncalgary40238 жыл бұрын
19.2 marks! some engineers use that measurement on TJI floor joist layouts. I have also used it in suspended slab joist layout. I honestly did not think I was going to learn anything from this video. BUT, the diagonal "4-8-12-16" trick is a great idea! Keep up the great work on these videos!
@synlawncalgary40238 жыл бұрын
I see some people are saying the 19.2 marks are for truss layout as well. I have actually never seen that in Canada. Is this a common layout in the US? 9.999/10 our truss' are 24" o/c.
@mattgraves97038 жыл бұрын
I'm a woodworker and use tape measure all the time, but I still learned a few things! great video buddy!
@wranglerstar8 жыл бұрын
+Matt Graves Thanks Matt
@markymask8 жыл бұрын
When we make a 'V' mark for a measurement, we draw one leg straight and one leg angled. You make the cut on the angled side of the line, to compensate for the blade width.
@maxnovakovics25682 жыл бұрын
That still gets me when using the carpenters square. I do the first on the mark but each next one i cheat by a 16th so i don't end up cutting 22 1/2 blocks at 22 1/4 because then your ponys are all leaning.. Learned that the hard way
@Micbiasiello8 жыл бұрын
I cant believe i learned something here. I chuckled at the 99% will learn something remark. the divide by 4 trick was really something!!! So Easy and elegant I would have never in a million years thought of that. Excellent Quality Video!!!
@wranglerstar8 жыл бұрын
+Michael Biasiello thanks! I think we've had 2 who said they haven't learned anything....
@leadpersuasion8 жыл бұрын
Cody, that tip about cutting the board into 4 equal pieces truly was mind blowing. Thanks so much!
@danielcarpenter23198 жыл бұрын
At first I was like- I don't need a tape measure video, but then I thought, Why not, everything else is interesting. So then you were like 99.9% of you will learn something. I thought, I'll probably be .1% LOL- I was wrong! I use powerlocks, so I didn't realize fatmax clipped at the top as well, the way to measure equal parts is really ingenious, I've worked with hundreds of skilled tradesmen and can't believe no one showed this to me. And I knew the diamonds were a different layout, but I didn't realize they were for trusses until I read the comments. Incredible as usual! Thanks! (Btw- you should put together a special dvd explaining all these terms, tips and tricks, and sell it to businesses as a jump start training session for new guys to take home. A quick quiz at the end could be given, and guys would bring the video back with correct answers. Then they could teach the old dogs new tricks;)
@MukYJ8 жыл бұрын
Black diamonds are for laying out roof trusses, on a scale of 6 diamonds every 8 feet or every 19.2" on center. Old standard was a truss every 24" on center but modern sheet goods aren't up to spanning that much distance. Another good tip: you can use the serrated edge of the hook to score drywall in a pinch (though a knife and T square will give you cleaner results).
@MukYJ8 жыл бұрын
Also, it's a good idea to stick with ONE tape during a job. As you and Mrs. W found out, not all tapes measure the same...
@wranglerstar8 жыл бұрын
+MukYJ So share a tape? That doesn't work very well. Might work better....MrsW
@MukYJ8 жыл бұрын
+Wranglerstar Not necessarily sharing if there is more than one person working, but it is usually a good idea to compare the different tapes on the same board at the start of a job, to make sure they agree with each other.
@wranglerstar8 жыл бұрын
+MukYJ That would have been smart.
@The1Helleri8 жыл бұрын
+MukYJ I use a swivel knife for scoring.
@michaeldougfir98078 жыл бұрын
This was a fun video! These tapes are mostly what my family & I use, and have for ages. When my Dad passed away, step-mom let me go in Dad's shop and pick out a keepsake. I chose his 30' Powerlock tape. Something that has always reminded me of him. I will always choose the longer tapes, (even my 100' Spencer logging tape,) so I will always have all that length to run out if I need it. I am willing to put up with a little bother here and there, to have that longer length always with me. Something else tapes once had was conversions or other tables on the underside. One was screw and nail sizes ("d" = "penny" size,) [That's English measure, for you Anglophiles,] or fractional equivalents; circumference, diameter and area of circles; wood screw gauges' hole size for hard & soft wood; lumber true & nominal sizes; standard door sizes, etc. And no metric!!
@michaelmiller65748 жыл бұрын
That old pesky metric system helps with figuring the mid point measurements! I learned tons of tricks from this vid! Favorite "tips" vid yet! Such an underutilized tool for me! Thank you so much for the content! And your new cabinets look great!!!!
@scotland22565 жыл бұрын
Use that pesky metric system and there is no need for mid point measurements lol Imperial is so out dated and inefficient its unbelievable it was used in the first place
@tanglediver8 жыл бұрын
I never had a faster tape to use than my Stanley Lever Lock 16'. But, I have milked my everyday user, a Stanley Power Lock 25' for the last 18 years, using it virtually everyday since then. The numbers and marks are wearing off, and the clip has been bent many times, but it still works!! Yes, I have newer ones, but I always reach for 'old faithful'.
@tanglediver8 жыл бұрын
+tanglediver Oh, black diamonds are trails for EXPERTS ONLY!!
@chonchin5168 жыл бұрын
I have so much on my plate lately at home and at school and work... but no matter how stressed i am nothing can put me in a better and more relaxed mood than your awesome videos even though i can't relate to them in the slightest! (seriously not the slightest lol) BUT I LOVE THEM THANKS AGAIN
@wranglerstar8 жыл бұрын
+chonchin516 Thanks. Glad to help. Love that you can't relate in the slightest - what does that mean exactly? mrsW
@chonchin5168 жыл бұрын
+Wranglerstar like I never touch a tape measure , ax , amvel, saws, etc... So I don't relate to the videos. They don't help me directly you know?
@wranglerstar8 жыл бұрын
+chonchin516 Well - glad they help you indirectly.
@ThePwhorton8 жыл бұрын
I enjoyed this video very much as I use a tape measure every day for work. I've watched almost all of your videos and thank you so much for each and every one. One thing I'd like to comment is the actual tape measure itself. I use a dewalt 25' tape as I found it to be my favorite, having two fat maxes myself. I like the dewalt because it has the easy to read 1/8th measurements throughout the entire tape measure. it's a little smaller than the 25' fat max which is helpful for me as it fits in my tool bags easier. Anyways, the point you make about using your knee and/or foot to extend the tape is a good idea in theory but if your on a ladder and easier way to do that, while keeping both feet on the ladder, is to just grab the tape, while bent, and extend it out with your hands. for example if my reach is 4 feet without bending and I'm measuring a 10' wall I'll just bend the tape in half and pull the tape out with my hands to about 12' so I don't use my feet or knees. nothing against your method once so ever. it's just if I were to do that on a job site, using my foot, it would be deemed unsafe. maybe try that out and let me know what you thing. another little trick is if your using a sharp carpenters pencil to make a strait line, if you measure 1/8th in. less then your measurement, assuming you have a strait starting edge such as a sheet of drywall, you can put the pencil against the end of the tape while the tape. is locked 1/8th in. less than your measurement and run the tape Long the strait edge while making your mark where you need it.
@ThePwhorton8 жыл бұрын
you probably know all that though haha great work regardless! keep it up and I look forward to future videos!
@christophermarks44528 жыл бұрын
Not sure if this was already discussed but one more great feature of a tape measure is its ability to add and subtract. Let's say you want to add two numbers....20 and 40. Fold the tape over and place the 20" mark on the 40" mark and then read the end of the tape. It should be on 60". To subtract, fold the tape over placing the end of the tape on the larger value and then read the tape opposite of the smaller value. This tip works for any fractions and is great when a calculator is not handy.
@maxnovakovics25682 жыл бұрын
A slide rule.. Our Uncle the Esssntial Craftsman taught me that.. My portuguese boss started yelling at me "ey caraljo wtf are you doing" but it worked like a charm.. How else do you less 23 1/4 from 104 5/8 quickly without being the rain man? (Dont say mark a board at the less value and then measure original length because i get it but its the exact same thing but youbdont always have a board..)
@h7opolo7 жыл бұрын
Thanks a million times for explaining the functionality of the sliding clip. I didn't realize I should compensate for the thickness of the clip while measuring inside corners. I always painstakingly held the clip open to get the measurement. Now, I am not annoyed by this function and can relax more. Thanks. 6:06 And then again at 10:30. You rule, sir. I will definitely use that method.
@WhirldworksfarmTX8 жыл бұрын
Mind blown! I can't tell you how much time I've spent trying to figure out equal cuts or fractional cuts. Thank you so much for this tip!! As for the black diamonds I have no idea!
@wranglerstar8 жыл бұрын
+WhirldWorks Glad to help.
@mdbigman8 жыл бұрын
I believe that the black diamond signifies the difficulty of the ski trail that I would be on and the number closest to it would indicate the number of times I could expect to fall on my keister! Great video, I actually did learn more than I thought I would. Thank you for your sharing WS!
@stephanbecker31296 жыл бұрын
I thought I would'nt learn a thing....you proved me wrong.....measuring the wood in 4 pieces is the best ever......will be using that in the future Thanx
@phildcrow8 жыл бұрын
Cody, as to the care and feeding of your tapes: I set a lot of concrete forms and my tapes get muddy a lot. I clean them when they get too sticky to self-retract and wipe them down with Pledge. This helps clean and lubricate them, and the anti-dust compounds in the furniture polish help shed dust the next time. I can't say for sure how much better it works than, say, WD40 or something, but when I started doing it, it extended the life of my tape considerably.
@MrErViLi8 жыл бұрын
Check out the Kobalt tape measures that are double sided and have the magnet tip. The one I use also has a built in scribe on the bottom of the hook for marking your material. It's also the kind that you press the button to wind it back up, which I greatly prefer over the lock open kind.
@clintwalton3198 жыл бұрын
I run my tape measure almost all the way out , and oil it once or twice a month . I think it helps . I use a light oil like 3n1 or rem oil , on a cloth . Granddaddy always greased the joints in his folding ruler . He used the kind that had a brass slide out scale . He would write his name in the grove for the slide out . I am proud of the old rulers with his name on them. I pull my tape out to about 12 feet or so and write my name on it . Your writing will not ware off as fast . Thanks
@CJLeTeff8 жыл бұрын
Thought I knew all you would mention, but the equal parts trick was new to me, great video.
@Rottwiler448 жыл бұрын
I bought probably hands down the best tape measure for me about two weeks ago. Milwaukee 25 footer with a magnetic tip, double sided tape, has an architecual scale both 1/8 and 1/4. Magnetic claw will help since I do a lot of theatre lighting and almost everything I work with is made of steel or iron. The only thing is a magnet will not attach to nonferrous alloys, such as aluminum, so it won't hold onto some lights.
@sjamberpacific8 жыл бұрын
I'm not sure if this was mentioned in the comments already; but, the serrated tip is used for making marks/indentations, into soft materials. Examples include: drywall, soft-wood lumber and foam-board insulation, to name a few. Great video!
@asdf09er3 жыл бұрын
I didn’t think I was going to learn anything but that angled trick to split into even pieces was pretty neat.
@M6T7Y8 жыл бұрын
All I use are Stanleys. I use the plain 25 ft. 30 ft was to heavy, Fat Max's were to bulky. I carry a tape everyday. I have 6,8 12,16 and 25 s. I don't use but 1 tape measure 99% of the time. Just like the problem you and Mrs W ran into, I use the same tape to measure as I do to cut. 2 different tapes 2 different measurements most of the time. Just a habit of mine. I have a Stanley I have been carrying for 6 years and still accurate. Just recently bought a new one for a couple more years. The tip on dividing a piece was one that I was shown 30 years ago and forgot how he explained it, thanks for refreshing my memory.
@Waiakalulu18 жыл бұрын
I worked with an electrician wiring up a whole house with power and Cat. 5 cables. We used the Fat Max 25ft. tape measure exclusively to pull all the cables. You stretch the tape out across the rafters to your partner that tapes the wire to the end of the tape measure, then you retract the tape and pull the wire. Works awesome!
@rbjerlauer7428 жыл бұрын
learned a lot, the center measure when u bent the tape, dividing the board into 4 equal parts (love that), but the main thing I learned is that I really need a stanley 25' fat max tape (love all those features, especially the top grabber)
@GumbootZone7 жыл бұрын
The diamonds, many call them "truss markings". But in Canada, the are joist markings. The 3/4 inch floor sheeting is rated to a maximum of 24inch span. Or, 4 spaces (5 joists) for every sheet. But to shrink it up so it has more tolerance and not at it's "maximum" They use a spacing that is smaller than 24in, but bigger that the old standard, 16inch (6 spaces/7 joists). So they divided the 96inches by 5 spaces, to get a distance of 19.2 inches. Some people erroneously call it "19 1/4". But it's not. It's slightly smaller than that, and the fraction changes at each spacing. So it has to be a decimal number. Framers who have to use them a lot, refer to the system as "nineteen-two's", and sometimes they call out the numbers as "54 diamond" (or what ever number), meaning... mark it at the ninteen-two mark closest to 54.
@cndbrn79757 жыл бұрын
the red diamond is for joist black is for truss
@danielrivers19758 жыл бұрын
As a tin knocker for almost twenty years two tools I always have are my fat max 25' and my Lufkin inside read stick rule (for layout). New Fat Max comes with magnetic tip ,sticks to tin nicely.
@bbcooter3888 жыл бұрын
The tapes are also available with Fractions written on the tape. I love these and threw all my other tapes away once I found the Fraction-marked tapes. I never was any good at figuring out the 5/8 mark or the 3/4, or the 3/8, etc. Now I can see the Fractions right on the tape. Did I say how much I love these Fraction-marked tapes?
@Zuseify8 жыл бұрын
love the divide by 4 trick was great I use a 3metre tape all the time as I am a plumber and it fits nice in my work trousers just ordered a Milwaukee 10meter looks nice will find out great channel thanks for the video zuseify from Cornwall in the uk
@1IdeaAhead8 жыл бұрын
The black diamonds are locations for stud center locations in common buildings for proper spacing. (I think) Not sure I picked up stuff but the fact 30s don't last is good to know. Bought my fat max in middle school, still have it after college and love it!!! Had a pocket 12 for measuring trunk spaces when I was a loader for lowes, that was the best tool for the job since it was tiny but 16 and 25 are handy indeed.
@Heisenbrick8 жыл бұрын
Folding the tape measure in half is very useful when hanging pictures on the center of a wall (Great time saver!)
@tjinnes7 жыл бұрын
My son gave me an 8 meter Fat Max. He said "it grips on anything" Well he was right about that! It catches and jams on anything, especially roofing netting! Actually, its a great tape. I love the long reach (this explains your comment about it being wide I guess). And its easy to read. We use the metric version here in New Zealand but it is just as clear at the one you show here. Loved the tip about dividing a board into four. I have never seen that before. I'll use it, thanks.
@boyhowdy58938 жыл бұрын
The small black diamonds, or triangles (diamonds are more commonly found), on the top scale of the tape measure starting at 19.2 inches are for truss layouts for 8-foot sheet goods. They are also known as the "black truss" markings. They provide a quick visual for the tape user and speed up the measuring process.
@Devildog1345HE8 жыл бұрын
I love the Stanley fatmax I have a 16' 25' and a 30' I used during my framing days. However I have recently switched to the Milwaukee tape I find it to be far more versatile. If you are able to look at one next time your at your local lumberyard you may change your mind on your favorite tape.
@damianmcintyre26056 жыл бұрын
All men with beautiful harmonic voices should teach. Lovely voice and teaching skills Sir.
@AtlantaRenovator8 жыл бұрын
As always, great video. Also can hang a Fatmax on vertical sheet of drywall as a sort of improvised plumb bob. Not bad for scratching hard to reach areas on your back when you have on several layers of winter clothing too. In our area lots of the framing help are Mexicans and they don't measure in 1/4" or 1/8" etc. they just count the long or short marks so 12 1/4" becomes 12 and one big.
@jackkramer87058 жыл бұрын
When you have time could you please do a full shop tour?
@BulvaiHammersson7 жыл бұрын
I'm a HUGE fan of stainless steel machinist style rulers. A few years back a local store had them on sale for a buck each and I bought ten or so. Given them away as presents, lost a few, etc. Still have a couple scattered around and love them to death.
@Andrew-315zz8 жыл бұрын
Great info for the "non-contractor". Always learning something from your videos!
@goatman0698 жыл бұрын
My newest tape is a FastCap PSSR16, reverse measuring tape. (I bought mine on Amazon, $7.99!) When doing layout, I prefer this design, so both sides, are right side up,so to speak. It comes with a rubber cushion to keep it from sliding when doing layout, it has a surface you can write your measurements on and wipe off, and when your pencil gets dull (#2 size) it has a built in sharpener. Fractions are also marked to the 16th. I've only had it a couple of weeks, but so far, it's my go to. I also have the Stanley Powerlock, Fat Max, and a Craftsman Diehard 25' that has been great to use for the last 20 yrs, but the spring is getting a little weaker, and the "automatic brake" is starting to slip a little. It should be one of the Lifetime Warranty items, I should look into that. lol
@Ryzomadman8 жыл бұрын
As other have said when I was 12, I was helping a joiner build my dads garage first of all he wound me up saying he couldn't tell me as it was a secret only a joiner could know, and after he taught me how to cut properly and do all the cleaning up he sat down and told me its all to do with ply and sheet wood being 8 feet in length and taught me a few other tricks .
@thomasgreen85325 жыл бұрын
there are 3 layout marks on a good quality tape measure. 12",16", and 19 3/16 it is used for layout on structured l lumber. that is wider than a standard joist. you can span farther than a standard lumber which allows for two things you do not need to have as many joist and you can don't have to support it in the middle with a post and beam. love your channel.
@bigpapa66878 жыл бұрын
great video..i should i say i'm quite the late bloomer and have been somewhat unsatisfied with myself spending more time on hitting the books for a medical career than getting my hands dirty. looking forward to watching your videos. good luck in Texas..:)
@MultiAlxndr8 жыл бұрын
I work as a general carpenter and my favourite tape has to be the komelon stainless steel gripper. It can be used in the rain dropped in a bucket of water etc and it doesn't rust/seize most tape last me 3-4 month but they have always lasted at least a year. The blade isn't too wide and hard to get into corners, they arn't the flashiest and don't have the longest standout but they just work. Where I live i'd say they would be more than 50% of the tape market with contractors
@CJLeTeff8 жыл бұрын
Thought I knew all you would mention, but the equal parts trick was new to me, great video. FatMax is all I use, went through many others before understanding there were none better.
@JimDockrellWatertone8 жыл бұрын
Good tips. I am partial to the Stanley Lever Lock as it's default is locked and you use the trigger to release it back with a squeeze.
@richardball91168 жыл бұрын
I've worked using tapes for more than 50 years and didnt learn the dividing trick.thank you.Also I'd like to ad the Stanley 16' tape ,on the other side from the measurements is A lot of useful builders information as decimal eq. ,nail & wood screw specs & other handy information.
@marklundeen10254 жыл бұрын
That diamond lets you use one less floor joist or rafter in an a foot span. Still strong but saves money when used on a big project. Great channel. Keep it up.
@oldcrookedfingercollins14177 жыл бұрын
They used to make a rubber cover for the stanly lever lock. It saves the case from falls. I still have one that has probably been used on 25 or so tapes . Was an electrician for 20 years doing commercial work , usually 30/40' high. Dropped a lot of tapes but never broke a case that had he rubber cover on it. I also always used a 16' tape for bending pipe, because EMT comes in 10' lengths no need to carry the 30' if ya don't need it great vid I did learn the trick about ripping wood into equal lengths.Thanks for the tip.
@AlexSh1548 жыл бұрын
As a professional carpenter I love the 25' fatmax tapes, but a couple months ago I bought a kobalt 25' tape under the recommendation of my boss, that is my new favorite tape and if you ever find yourself needing another tape I highly recommend them, they also have a lifetime warranty. In addition, I did learn a couple of things from your video mostly the cutting sheet goods into 4 equal pieces, that was ingenious.
@wranglerstar8 жыл бұрын
+Alex Short Thanks.
@YouTubalcaine8 жыл бұрын
+Alex Short - I'll second that! I've really been happy with mine, and at $7 (for the 25') it's a fantastic value. Some folks hate it, but I love the self-locking model. Should we tell him it also has a metric scale on the back? ;D
@JDCOOK858 жыл бұрын
Thank you, for you taking the time to share ideas. Great channel.
@RobbieLagrand8 жыл бұрын
When you hold your pencil under an angel and turn it while drawing a line keeps the point sharp. ;) Greetings from Holland.
@1rex018 жыл бұрын
Not to long ago I bought this old lufkin tape measure from an antique store. It's leather with stitching on the sides and a canvas like material as the measuring tape. It has this little handle on the side that flips out and you spin to wind it back up
@jdwelborn8 жыл бұрын
I have a Craftsman 8m/26ft tape that shows both metric and inches. It is great for when you are purchasing something on-line and description are metric, you can quickly cross reference size for your needs!
@smiley37greg8 жыл бұрын
I have one of those too, as a back up tape. Occasionally I'm faced with something requiring a metric measurement.
@eoinmoore20038 жыл бұрын
@ Wranglerstar when I came into this video and you said we would all learn a thing or two new about a tape measure I said to myself yeah right ! what Is there to know about a tape measure apart from it measuring things but damb everything you said in the video I couldn't believe! I wish I knew them before now. Great video thank you for sharing
@jgilorganic79668 жыл бұрын
Cody, while listening to this video, I just remembered (no idea why) you mention a couple of weeks ago another KZbin member who was suddenly banned, or basically disappear from KZbin. Then I started to wonder what if you don't save your videos on a hard drive or something similar, you have the risk of loosing everything? Any chance you can talk about in the future about storing videos on different platforms or maybe other devices? On a different note, you inspired me to stop living a mining-less life, and now I will be embarking on a different lifestyle with the family, and live almost 100% sustainable, off the grid, to finally live life. For that. Thank you!!
@edcomfort33387 жыл бұрын
I have used tape measures for probably, more than 60 years. I helped dad make things in the 50's and still using one quit often today. I do woodworking and have yet to measure over that time over 12' of anything. I know that people use the longer length, but why but one that you don't need. If your like me, the Stanley is a great product, but get the one that meets your needs, they come in 10"which I have a couple and also a couple `12' ones too. I do have a 15' that I seldom use.
@nathenwallis92348 жыл бұрын
I used to use a fatmax myself, but switched a couple years ago to a Milwaukee. it has a lifetime warranty, seems to hold up better and is about the same price. I have seen people use the serrations on the tab for making a mark when you don't have a pencil, is that what it's for?
@iMatt658 жыл бұрын
Good tip on writing down dimensions. Another KZbinr I follow also sells a recorder called the Tape Boss that's similar bit electronic.
@TokyoCraftsman8 жыл бұрын
0.1% here, and I can thank my dad, uncles and grand fathers for knowing all the pro tips. Lee Valley Tools sell a tape that you can write on the side, and on the tape itself, and it has a built in pencil sharpener. www.leevalley.com/US/Wood/page.aspx?p=71705&cat=1,43513 Back in the day a lot of carpenters, especially cabinet or furniture makers did not use a tape/ruler they used what is known as a Story Stick or Storey Pole. It was a piece of thin, straight wood that you would mark the various dimensions onto, no need for fractions and numbers, just mark the story stick, that is how long it is. They would keep the story sticks for say a desk, and if they want to make another, they have all the dimensions on the story sticks. It is a very useful technique. www.canadianwoodworking.com/tipstechniques/story-sticks Domo
@SuneagleO97 жыл бұрын
If you can get your hands on one i would definitely suggest a komelon tape. I use it every day, it is an auto lock the tape on it is very durable, the case is durable i drop them all the time. plus it has the benefits of the stanley with large numbers and measurements on both sides of the tape with a nice hook for lumber and piper work.
@Steve.Alex328 жыл бұрын
Great video! Very helpful! I have a Stanley fatmax myself, great tape measure! Absolutely love it!
@ATBOYD-sg4hd8 жыл бұрын
will be using the angle trick to divide a board evenly from now on thanks. Even the videos that I fell I have solid knowledge on you still seem to find something to learn
@wranglerstar8 жыл бұрын
+ATBOYD 2015 great. always nice to learn something new.
@swampratman20008 жыл бұрын
some useful tips there. a few tool vids back you showed a long handled plane and said you would tell what it was used for in the next vid did I miss that vid?
@owenhunter11308 жыл бұрын
In my opinion after using and going through 100's of tapes the best Measuring tapes are Milwaukee 16 and 25 foot tapes definitely recommend trying them out.
@wyattoneable8 жыл бұрын
Love the tips. I picked up a few I didn't know, awesome!
@50StichesSteel8 жыл бұрын
I love that angle trick for equal parts..I never wouldve thought that would work and I use a tape everyday now
@joshmerrell21268 жыл бұрын
Looking forward to meeting you in Belton, Tx! Let me know if you need anything while your here! Great video brother.
@burlcarey8 жыл бұрын
metric lay out is the diamond system though some use it for rafter spacing so as to skimp on the wood strength integrity of a shed but it also allows for an 8 foot sheet goods like plywood osb or other types of any 8 foot to break evenly on the spacing of it...but unfortunately osb sheating only has thier lines on it at 12,16,& 24" centers so youll have to chalk line the difference if your going with the diamond setting layout. you can also use it for a stud layout as well. or anything that will break sheeting on the 8' mark.
@caskwith8 жыл бұрын
No idea on the black diamonds but I am sure reading the comments will enlighten me. Regarding the little V mark, I also do that but I "tick" the side of the V onto the waste side so not only does it show me exactly where I measured but also what side of the line to cut to and what is waste.
@shanegillespie60148 жыл бұрын
I guess I fall into the .01%. I've been a carpenter for 28 years. I even know what the black diamond is for. Having patted myself on the back, I say all that to say you are spot on! I primarily do interior finish work these days and prefer the Stanley classic 25'. I have heard that the carpenter pencils are made flat so if you lay them down or drop them they don't roll away.
@wranglerstar8 жыл бұрын
+Shane Gillespie Ah - the .01% - thanks for watching anyways. MrsW
@jeremymaclachlin79258 жыл бұрын
very interested in finding out about those black pyramids since I am a beginner carpenter and any tip to impress the boss would be helpful. thank you for this very informative video keep them coming!
@wranglerstar8 жыл бұрын
+Jeremy Maclachlin Glad to help Jeremy. I will do more on different tools in the future.
@jinksto8 жыл бұрын
Interestingly, I was raised with carpenters in central Louisiana. The gold standard toolbelt tape was a Stanley powerlock 12' . It's small enough to fit in your palm and long enough to do 10' walls. The black diamonds are truss marks. Something that you didn't mention (I think) are the red numbers are for laying out studs.
@mackenziemullett37418 жыл бұрын
the black diamond is on-centre spacing for some engineered I-Joists
@platter48 жыл бұрын
two tricks that I find are handy are picking something up from a scaffold with the hook at the end of the tape or laying out cuts on something by holding your finger at the right measure and then holding a pencil against the hook to mark out straight lines without a chalk line or straight edge. it's kind of hard to explain but I can do it without even thinking at this point
@tysonburns95358 жыл бұрын
...You mentioned doing overhead measurements. I'm an electrician and do a lot of overhead work and I had a measuring tape that was printed on both sides so I could see my overhead measurements without having to twist the tape to read it. Unfortunately, it was stolen and I can't remember who made it but it was super slick. Just something to think about. Thanks a lot and keep up the good work.
@wranglerstar8 жыл бұрын
+Tyson Burns Sounds useful. sorry it was stolen.
@tysonburns95358 жыл бұрын
+Wranglerstar I was in lowes today to look at a drill doctor because I have a million dull drill bits, and guess what? I found my stolen measuring tape! Turns out it was a 35 foot kobalt. Do you have an opinion on the drill doctor or any other drill bit sharpeners?
@bradsampson16696 жыл бұрын
Hi Cody, while watching your video I noticed the unfinished drywall behind you. I would suggest that you change the layout on the inside corner as the current layout you have is more prone to cracking. I was tought by an old pro to never have a joint at an inside corner; instead pass the joint beyond the corner at least 6" if possible. This problem is very common with novice drywall hangers.
@micromachine79548 жыл бұрын
I picked up a great little quality 16 footer at walmart for less then 5$! Its made by Komelon and although I hate everything that walmart stands for with all the chinese crap they sell, I just had to have it! Its small, and easy to read and has an automatic lock! the coated blade feels nice and even has fractional divisions! Handy little tape to just throw in your car's toolbox (which everybody SHOULD have) or anywhere you might need to bust out some measurements. Its small enough to fit in a pocket but has a clip as well. Perfect for trips to the hardware store. For precise everyday tasks I use a Starrett 6" scale with 10ths and 50th divisions. I would like it to have metric on the back but I haven't found one like that yet. I like all the variations in modern tapes, The variations from milwakee and DeWalt look promising. I also have a very handy tape that has a regular scale on one half and a half scale on the bottom to find the center on anything quick and easy without the bending technique although that is a great tip!. Ive also seen Diameter scales on the back of some tapes for measuring round things or belts. I'm a machinist so measurement is a big deal in my world.
@Ruuber28 жыл бұрын
Fun fact; the oldie ruler is called a Duimstok (Thumbstick) in Dutch :) Another great video Cody. Going to watch the Biblestudy tonight with some hot cocoa :) . Have a great weekend ~!
@wranglerstar8 жыл бұрын
+Ruuber2 you too
@DrCRAZYde8 жыл бұрын
Cool Info. In Germany most of the builders used the folding thinks. And the good ones are make from wood and has company logos on it. A lot of peoples collect them.
@joshdesjarlais81548 жыл бұрын
thank you for another great !!!! as for the question about the black diamond's I do believe they represent the correct distance for truss layout span.
@brianb82558 жыл бұрын
The black diamond is for truss layout. The fat max 25 foot is my favorite tape. I have a second job install shelf genie pull out drawers and we use only millimeter tapes, we can make our drawers to very close tolerances, I still prefer the fractional measuring.
@kevinvesey87778 жыл бұрын
Finding the center of a fraction is easily done in your head, especially with common fractions of an inch in carpentry. Just double the bottom number. Center of 3/8 is 3/16. Center of 11/16 is 11/32 and so on. So finding centre if say 67-5/8 is 33-1/2+5/16=33-13/16". That may seem complicated but when your tape is in front of you just work it out from the largest number down. Try it a few times, it's really quite easy.
@shingleful8 жыл бұрын
Working in roofing and construction. I've found the fatmax 25 foot to b a great tape, that being said I also keep a 40 foot tape with me it dose not get used a lot but it come in handy with longer measurements. back when I first started the only tape we used was the 30 or 35 foot tape. I replaces my broken 30 foot with a 25 so i could find mine quickly and it was smaller and lighter, all the other people started liking it for those reasons they replaced their tapes with a 25 foot tape and now i cant seem to find any tapes again. except for my 40 foot tape
@robaguiar23428 жыл бұрын
Ive done the notepad trick on my stanley fatmax 25' tape many times. I just remove the label and sanded the plastic with a very fine grit, usually 400 or so, makes a great pad. Also, black diamond is used for spacing of i-joists which is around 19 1/4" or so.
@calebco28 жыл бұрын
Hey Cody I love the channel. We live here in Idaho and have a small piece of land. My wife and I home school and I work as an ER nurse. land is not much yet, but is home and ours. I have learned so much from the channel. I am restoring old hand tool and I have my dads wood shop from the 60's when he got out of the Marine Corps and Viet Nam. They are old Rockwell tools and work really well. I have made some of the projects you show on the channel and have had a lot of fun. My brother is a timber faller in Hood River area and contract fire faller in the summer. They have a small homestead and also live the lifestyle like you guys. Hey a lot of words. but what I was wondering is do you sell the carpenters pencils with your makers mark on them. Thanks so much
@leegrubb67538 жыл бұрын
My Dad all way used the folding wood ruler! (Still have one of his around here) He was an electrician! Don't want a metal tape working with power. Yes he was very careful. But others may not be! Yes! I like the 25 wide tape. Yes! I work alone a lot! I'm no carpenter! Something has all ways stumped me. Maybe you can answer a question that comes up a lot. I cut a board two or three time and it still to short!!! LOL Thanks for a great video!
@leegrubb67538 жыл бұрын
Thanks for the help!
@Mowk868 жыл бұрын
+Lee Grubb I think your cutting joke went over someone's head!
@leegrubb67538 жыл бұрын
That was OK! They where trying to help! Glade it did not go over yours!!!