GCC Expert 24 Vinyl Cutter Presented by Target Transfers and Stahls’

Training video on the setup and use of a GCC Expert 24 Plotter Cutter. With an Introduction from Josh Ellsworth and training by Nick Horvath, this 22 min how to video will get you up to speed and making money from your plotter cutter.
Learn more about your next vinyl plotter cutter on our website bit.ly/2tyh7hy
Follow us on Facebook / targettransfersuk and Instagram / targettransfers
Read our blog bit.ly/2XlI3i6

[@kayode98]

My cutter is cutting through my vinyl backing, but the test cut looks fine. Force is set at 70 and speed at 25

[@XandersJamesWayne]

You know... that's really xtrange... cuz, some times I put 100 on pressure and 30 of speed and the backing of my gcc cutter is and still like new!!!...

[@TubeInspire]

hello! do we change any setting when cutting heat transfer vs decal vinyl?

[@jhonvaldes9772]

I have an Expert 24 LX plotter (it does not have an optical reader) and I would like to know if with this plotter I can cut figures that are more than one meter long? for example cut a rectangle or any figure of 50 cms. wide x 200 cms. long ... how can I configure this plotter to make that cut or longer cuts?

[@AnotherKentPaul]

What do I have to consider when buying or searching online for a new knife holder? Is it possible to use 3rd party holders or only the GCC ones? Please help, I need a new holder and knife. But some of them seem super expensive! Thank you!

[@yyakenn]

Hello, I have this plotter for a couple of days but the head hits the left side of the plotter when it reads the material and it is somewhat annoying to others, I do not know if it could be damaged by that problem, how did you solve it, thanks for your support.

[@StahlsUK]

Hi, thank you for your comment. If you get in touch with our team on [e-mail] they will be happy to help you :)

[@vytasb5723]

Hey Fellas I own this plotter, but one thing I can't understand why carriage moving space is so small for example my carriage moves even a little bit smaller space than your, your plotter stops at in the middle of third white mark from right to left, mine slightly reaches the third mark from right to left, but doesn't stop in the middle of the mark like yours.

[@ravi5875]

Sir how to add expert24 machine to flexisign 8.1

[@syednayaz8467]

thank you for the showing to the Gcc expert24 vinyl cutter I intrestad to buy this machine can you please reply to me when we're parches this because I m in Saudi Arabia

[@ofinckashills9185]

I have bought a Gcc espert24II but am having problems cutting my Stahls CAD-CUT vinyl. Nowhere can I find how much pressure you have to cut this. where can you find that data?

[@StahlsUK]

Hi! Would you like us to arrange a call with our customer service team?

[@pettool7]

I too am looking for the VLCD. Is it in Great Cut or somewhere in the Expert 24?????

[@Daniel_Plainview]

can i do die cut on the expert24? / greatcut4 software?

[@mukarimu]

Can we get this answer by the way?

[@XandersJamesWayne]

nice video... but... where do you locate that VLCD window????...

[@bossdup3406]

Xanders Wayne Put the software back in. Click on EXPERT then click on ACESSORIES

[@bitsmart...]

copy the vlcd.exe file along with usbapi.dll to the folder where you wish to have the VCLD

[@XandersJamesWayne]

@@bossdup3406 thanks dude... I'll look up!!!... then I'll tell how it goes... thanks a lot. 👌🏼👌🏼👌🏼👌🏼👌🏼

[@XandersJamesWayne]

@@bossdup3406 sorry I answer so late dude... I was very busy... but as soon I get to my house... I'll look for this option...

[@XandersJamesWayne]

@@bitsmart... thanks... I'll see that... I'll tell you some other day thou...

[@rudybasso4455]

Great video. Now confident about getting one.

[@belindagarza3184]

I have a GCC vinyl cutter expert 24, i'm having issues with vinyl shifting as it cuts. I try make sure I have the rollers on the white bars. also I try make sure there is slack from the roll of vinyl. I have also cut a good size sheet so its not trying to move so much thru the cutter, but it keeps shifting, any suggestions?

[@StahlsUK]

Hi Belinda, Sorry to hear that you are having problems with the shifting. Could you give us a call on 01376 326351 or email [e-mail] and we can arrange a time to go through this with you?

[@scantojack09]

does this software works on mac and adobe illustrator? thank you I want to buy that expert 24

[@StahlsUK]

Hi Kobe I hope this link helps: • Compatible with Windows 2000/ XP/ Vista/ 7/ 8 and MAC OS X 10.4-10.7. www.gccworld.com/goods.php?act=view&no=12

[@vinayakkoshti1876]

Sir plloter price

[@rao.advertising5167]

EXPERT 24 GCC PLOTTER CUTTER IS NOT WORKING PROPERLY .AS ITS CUTTING FORCE SOFTWARE IS NOT WORKING . SO PLEASE GIVE ME THE SOFTWARE FOR PLOTTER .

[@raziashah3605]

Can I cut it though silhouette software?

[@StahlsUK]

Hi Razia, it would come with different software but you would find it just as easy to use as Silhouette Studio

[@marinahepner7585]

Josh, "HELP!" I went onto facebook.com/CADCUTdirect and got a message that said that this site in NOT available or it has been deleted! So how do I find you now?

[@StahlsUK]

Hi Marina, never fear! Try facebook.com/stahlsheatprinting

[@jasongilliam8149]

Your FB link doesn't work. facebook.com/CADCUTdirect

[@afzaldeaiya]

Pils contact

[@GoodvinXL]

Expert Plotter Cutter is so slow snd noisy. (comparing with Jaguar II)