Tata Nano Radiator Flush DIY

[@SivaKumar-jo8km]

மிகச்சிறந்த வேலை... இப்படித்தான் செய்ய வேண்டும் நண்பருக்கு வாழ்த்துகள்...

[@rajeshmohan7881]

Thank you dear. It proved very very useful to me. It saved my time to garrage, money and enhance my information.

[@rafiqmalek7141]

Very Good इंफोरMATION

[@RavinderSingh-nv9cg]

clearand smuthly work way

[@AmulLuthra]

😀🚗💥

[@loksapps5455]

Bro superb information kindly advise if car started without water in radiator is it ok gas kit will be damaged kindly advice further also advice 1 lts coolant and 2 lts water to be added

[@harmeetkukreja8750]

I was abt to check with you regarding coolant color for Tata Nano red or green as premium cars use red but Maruti and Nano has green. Btw golden cruiser coolant acha hi chalta hai. But good I saw coolant flushing procedure. It's dam simple with Nano, drain plastic nut open after engine cooled and top radiator cap open and remove all existing rusted coolant. Then start engine for 2 mins to drain out more. Then put water in radiator to flush off old coolant and also wash radiator outer with water. Also bottle pipe to be opened while flushing all old coolant residue. Once water clear, close the drain nut, fit the reservoir pipe and add water upto max levels in reservoir and radiator. Close the reservoir cap and radiator cap and run for 3-4 days with water and heater on to circulate in heating system too to bring all the residues Then later cool engine and open the drain nut and radiator cap and flush out water. Then again put another cycle of clean water in radiator and reservoir, open pipe and rinse it properly. Then fit the reservoir pipe, close the drain nut and add fresh green concentrated 1 ltr coolant in radiator and reservoir (1:4 concentrate) Then add 2 litres of boiled or distilled water at room temperature to fill till top and then run engine to circulate and top up again with distilled water. Put it max marking in reservoir to provide space for air. Close all caps and run the car for 20km and then again topup. Till that time keep engine bay screwed with 2 butter fly nuts to avoid pains of opening all. After 3-4 times top up after running, close engine bay with screwes and done. Experience engine performance and car engine cooling, heater and AC and see the difference in air smell inside the cabin. Work done

[@alihussainmodi2627]

Coolent kitne time baad change karna padta hai?

[@mesafar]

Detailed video.. keep it up..

[@butterflybestie]

Awesome Bhai clear instructions...

[@ANANDLOBO-t1w]

Thermostat valve is closed and opens only when it reaches activation temperature. Only then coolant from engine will drain out.

[@ShahrukhKhan-gk9hj]

Amul bro coolent me kitna water and coolent ka ratio milana chahiye?

[@AmulLuthra]

Bro golden cruiser k upar 1:4 likha hai but maine.1:3 k hisab se dala hai. 1 liter coolant concentrate mein 2 liter paani so total 1 bottle 3 liter ban jati hai.

[@ShahrukhKhan-gk9hj]

@@AmulLuthra thank u so much bro for this information 😘❤️

[@gajananmadhukarwaghamare9077]

Hi meri nano ka rpm hai ho raha hai runing me kya problem ho sakta hai

[@JK-pz1gr]

Thanks 👍

[@vivekanandamandal3424]

Bhai tum hare Hansi Badi achha Hai haste raho hum tum hare video dekhta Rahe.

[@carobsessions4707]

Bhai agli baar heater bhi on jarur kerna it's help to clean inner line of heater also because jesa aap jante h ki coolant hi inner coil m aata or jitna coolant garam hota h utna hi heater garam hota h Ishliy keh rha hu heater jarur kerna chahiy after car engine get at normal temp 90°C

[@AmulLuthra]

Haan heater bhi kar sakta tha on aur uss side bhi circulation ho jati. Uss time dimag mein hi nhi aaya. But chalo koi nhi next time karenge 😀

[@carobsessions4707]

@@AmulLuthra best of luck bro this little bro always with you😍🤟🏻

[@AmulLuthra]

@@carobsessions4707 awesome bro 😀

[@sarthakgoel2627]

Mai bhi yahi soch raha thaa

[@carobsessions4707]

Badiya bro

[@AmulLuthra]

Thanks 😌

[@surajdharmavira3614]

Thanks. Nice DIY

[@venkateswarlumittakolu623]

Excellent

[@harshitchoudhary9201]

Radiator flush ketna km pa karna chaiya

[@harshitchoudhary9201]

Badiya h new coolent cooling badiya hoge nano thandi rahage

[@sarthakgoel2627]

20000 km

[@AmulLuthra]

Maine toh first time kiya hai bro and km around the 36k 37k...

[@sarthakgoel2627]

20k is a good time, baaki first time maine bhi 50k pe kara thaa. But because of rusting radiator can clog. And radiator is of around 3k minimum. 2. Heater coil can clog, vo replace karne ke liye poora dashboard kholna. Better hai 20k pe karlo

[@mayurtank7546]

Great

[@sumitray1772]

Did you flash the radiator with normal drinking water ?

[@AmulLuthra]

Yeah I used normal water only bro.

[@loksapps5455]

White bottle in car to be filled by coolant or water ?

[@bireshkumar806]

Better you fill it with coolent. Water can be used if coolent is not available.

[@RokstarChinu]

Very informative ❤️❤️❤️❤️👍👍👍👍👍👍👍

[@sauravsharmakaushik6511]

मेरी nano कार का coolent minimum se bhi niche chla gya tha mechanic ne bina flush kiye hi poora fill kr diya iska koi nuksaaan hai hai to kya karana chahiye

[@samSsainyam]

Bhai mera raidiator saaf and condensor coil and condonser sab change ho gaya, ac wale nai bola raidiator saaf karwa lo ac cooling ho jayegi.... Ab kya krna ac abhi bhi normal fan ki tarah chal raha, ab car lai jaake ac wale k upper chada du 12k kharacha kia tha ac ka....

[@carobsessions4707]

Bhai wese yadi 3.7 litre coolant total ata h Nano me toh aapko 1litre 250 ml use kerna chahiye tha for bestest results of coolant and baki water

[@AmulLuthra]

Abhi 100% nikla nhi tha so that's why safe side k liye 1 liter hi use kiya. And badiya rha.

[@carobsessions4707]

@@AmulLuthra awesome ha bhai dekha mene aapne kaha tha engine me bhi koi valve h woh khulega tab pura niklega😊

[@carobsessions4707]

Wese isme 1 out 3 likha h lekin bestest result 50-50% per hota h joh company use kerti h

[@AmulLuthra]

Isme bhai 1 is to 4 likha hai golden cruiser k bottle pe. But maine as 1 is to 3 use kiya.

[@omkarmordekar693]

Bhai galat tariqe se kiyaa hai Aap ne

[@AmulLuthra]

Kyu isme kya galat hai bhai. Please thoda explain karo I want to know.

[@Roshanrnair]

1. Never run the engine without any coolant. 2. You must mix the coolant and then add to the radiator. The method you used, there will lot of inconsistencies in the viscosity of the coolant which will take sometime to mix properly with the water.

[@shibdasmallick5540]

80 percent timepass only 20 percent action.

[@AmulLuthra]

I think 1 easy way mein explain karna. Rush karne se zada better hai. Baki sabka apna apna hota hai.

[@harshitchoudhary9201]

Engine clean karo 1din

[@AmulLuthra]

Kar do diya isi k saath video dekho bhai pura please 😀

[@harshitchoudhary9201]

Video pure dakh le h bhai mera matlab h badiya proper clean karo chamka do👌

[@AmulLuthra]

Ohh acha toh ye baat hai 😀 karte hai bro ispe bhi kaarwai trip k baad 😀

[@harshitchoudhary9201]

@@AmulLuthra ok bro👍