tatp, p.2

[@degraham9198]

No gang stalkers in America.

[@juliaero5348]

How to remove the acid after you finish?, are u using sodium bicarb?

[@iamsonedisoncahaya4845]

I finally manage to make TATP with 1:1:1 ratio of 50% Hidrogen Peroxide, Acetone, and 32% HCL. But still Acetone is really expensive that two other ingredient, can you give me advice how to get cheap Acetone?

[@kexption3762]

I got acetone from nail polish remover and 6% hydrogen peroxide from medicine store

[@kexption3762]

@Niger Niger We can use 98% h2so4 not only hcl

[@kexption3762]

@Niger Niger I think it works but so slow maybe you can use . 30 at /30hp/25hcl if it not work you just boil hcl 100’c to remove the water out from the acid the acid is 15% and 85% is water if all you have is 100ml mean 85ml is water but 30% hcl can do ap

[@onlyholyhates]

Wait, idk that is possible to use hydrochloric acid

[@iamsonedisoncahaya4845]

@@onlyholyhates Mau bikin TATP juga bang?

[@iamsonedisoncahaya4845]

Please in the next video you make Methyl Nitrate using 118 gram Sulfuric Acid, 39 gram Nitric Acid, and 32 gram Metanol. Or recrystalitation Amonium Nitrate for increase Nitrogen concentration.

[@artarz4239]

I have 98 percent sulfuric acid , 30 percent h2O2 and 100 percent aseton, how can make ta*p?

[@JesusChrist-ey9qt]

Just mix them all together and wait for crystals

[@rzys2765]

@@JesusChrist-ey9qt and cool it down properly or else you may loose few limbs

[@andreiradu9875]

U can make with 30 ml acetone 30ml h2o2 35% and 12ml h2so4 35% after 6 hours almost al the solution will be Cristal's and after that u can filter it and pour water on it to Clear the acid and make it dry faster

[@minhtuanvohoang1788]

​@Ku4z-pyrotech18_6Just need to set the room temperature

[@thansau-sn9fi]

please tell me what the exact formula is, currently i have, h2o2 50% and acetone+h2so4 98%, i plan to follow the equation, 30 ml h202 50% + 30 ml acetone + 6 ml h2so4 yes Is that Okay

[@Myhandgonebro..]

Sulfuric 10 ml not 6 ml

[@asmatparveen2964]

Can anyone tell me why my crystals not forming 😢

[@elanti-furrodelrancho3499]

Are you using acid? Maybe your hydrogen peroxide isny very concentrated

[@andreiradu9875]

I made with 30ml acetone + 30ml h2o2 3%+ 6 ml h2so4 wait for 20mins and put again 6ml h2so4 and cool 0-10'c and after another 20 minutes another 6ml h2so4

[@andreiradu9875]

But it works slowly after 2 days I got 1g but if you put a lid on the solution produces crystals for a week or 2

[@andreiradu9875]

And the h2so4 38%

[@pulice1391]

Hi brother gave ma a tatp furmula plese brother

[@7hunderstorm242]

Plz do not make this shit 💀if u let it too long the trimer form will appear and you'll possibly lose fingers

[@kexption3762]

That true I let it for 2mon and it has something change And it burns better and have louder sound 😂

[@7hunderstorm242]

@@kexption3762 plz never work with more then 5g of this I almost lose my foot bcz of this crap, the trimer is SO sensitive to chocs and friction, could explose if you touch it wrong

[@kexption3762]

@@7hunderstorm242 ok thank you brother 🙏

[@chemistryofquestionablequa6252]

It's the dimer that's the super sensitive form. You end up with some of it due to poor temperature control and or using sulfuric acid as the catalyst. TATP becomes more sensitive over time because it sublimates and larger crystals form.

[@amanitaocreata4401]

​@Chemistry of Questionable Quality so then it's best to use conc HCL as the catalyst, keep it under 5°C the whole time, and wash the final product with ice cold water and maybe a little sodium bicarbonate, right?

[@yod999]

ขอทราบวิธีเก็บรักษาtatp หน่อยครับ ผมเคยสังเคราะห์ แต่ไม่กล้าเก็บไว้😂

[@kexption3762]

1) ของผมก็ปล่อยทิ้งไว้เฉยเฉยมันก็ไม่เป็นไรนะ ตัวเก่าผม2เดือนกว่าแล้วยังจุดได้ดี แต่ถ้าจะ เก็บรักษาไว้จริงๆก็ใช้ แอลกอฮอล์ล้างแผลแช่ไว้ได้ ผมก็ใช้แช่ etn อยู่สามเดือนแล้วตอนนี้ก็ยังใช้ได้ดี

[@kexption3762]

2) Ap ทิ้งไว้ซักเดือนนึงแล้วค่อยแช่นะ เพราะว่าถ้าเราทิ้งมันไว้ซักเดือนนึงมันแรงกว่าเดิม

[@Myhandgonebro..]

​@@kexption3762แอลกอฮอท่าแช่พวก pern etn tatp มัรละลายอยู่นะ นิดหน่อยแต่แนะนำหาสารที่มันละลายไม่ได้

[@ไม่เชื้ออย่าแอ็ก]

ตอนเทกรดค่อยๆเทรักษาอุณภูมิหรือเทไปเลยหมดๆครับ

[@infarredpyro]

เเอค ไปก่อนร่ะกัล

[@w.ild_craft7652]

อะซิโตน, ไฮโดรเจนเปอร์ออกไซด์ 3%, hcl 32% ทำไมมันไม่ตกผลึก? การเปรียบเทียบของฉันผิดหรือเปล่า การเปรียบเทียบคือ 15 acetone 15 hp 12 hcl

[@kexption3762]

I made 30ml acetone + 30ml h2o2 + 6 ml h2so4 wait for 20mins and put again 6ml h2so4 and cool 0-10’c after 1h i finished

[@andreiradu9875]

​@@kexption3762 It didn't work

[@infarredpyro]

H2O2 % น้อยไปครับ

[@fudes587]

hmtd better, tmdd even better. dont make tatp

[@iamsonedisoncahaya4845]

If you know HMTD is more sensitive than TATP and that's lil bit dificult to synthesize.

[@fudes587]

@@iamsonedisoncahaya4845 no, its not.

[@JesusChrist-ey9qt]

I’ve been trying to make hmtd but I’m not having any luck

[@rzys2765]

@@fudes587tatp is super easy to make and you can make it from chemicals that are legal almost every where (unlike other explosives wich ussulay need sulphulric acid etc.)

[@fudes587]

​@@rzys2765lmao tatp needs sulfuric acid, you know nothing about chemistry