Brother Pocket Jet Tattoo Stencil Machines

[@x_z0mb1_x]

When using the brother just cut off the yellow sheet but cut it so the pages are still stuck together so there will be like a half inch of yellow left at the top . Holding the sheets together . This works best for me then all the sheets are not loose

[@wirsindsehr]

brothers are working perfect if you take the time on how to use them. power supply or firmware update is the most important. mine 2 are working just right on small lines and big black areas.

[@TattooShopTalk]

Once you figure them out they do pretty well. One thing I can't figure out is how to get rid of those lines when it folds a bit.

[@kinnonstatttoos7635]

Hi bud, whats the best power output for the brother . Thanks

[@x_z0mb1_x]

Great tip on using smaller pieces I really need to start saving some because I waste a lot of stencil paper lol

[@TattooShopTalk]

it goes pretty quick and expensive if you are wasteful

[@carlmarshall40]

Thanks for the information, I'll stick to doing the carbon by hand.

[@TattooShopTalk]

Sure - why fix what's not broken

[@x_z0mb1_x]

Dont forget to mention that these brother printers can print gradients and shading. Something the cheapie one can not do

[@TattooShopTalk]

Gradients are tricky

[@saranosrati1599]

Oh thanks. It was my question

[@ninjapk2338]

Brother pj power supply is 15v@4amp perfect for fax paper(thicker) but to powerful for transfer paper. Try to use like 12v 2.5amp or something like that and brother pj should burn stencils. No need to light up the designs

[@TattooShopTalk]

Thanks for the numbers

[@vhaleryanadamant1975]

My brother printer makes extremely faded stencils, almost like it has no power to "Burn" the indigo I have 763, even on 9 or 10 intensity it barely makes a few lines visible... extremely disappointed really... got the driver and everything, same shit on Stencil Mode off and on

[@TattooShopTalk]

My first guess would be - quality of stencil paper or how powerful is power brick. And there you go - learning curve with these machines can be annoying

[@vhaleryanadamant1975]

​@@TattooShopTalk Apparently the Stencil Mode is jackshit, makes my printer burn nothing, without the stencil mode it's decent, but can't really get shades, however pure line tattoos are crisp and nice. Truth be told I had a 723 and was amazing, sold it and got 763 just for the bluetooth but I feel 723 was much much better and the bluetooth app is anyway shit cuz it doesn't show my recent pictures that I want to stencil, I can download them, screenshot them, move them to the camera folder and the brother app still doesn't see them so it's pretty much shit

[@markus131]

I have an PJ 623 is it possible to also access the advanced print options? Because I can't choose this option.

[@TattooShopTalk]

No idea on that specific printer. I assumed that it some default menu ... at least when you print via photoshop

[@Pty1980]

So would this be a better investment the the last one you reviewed? The standard cheap printer to stencil printer

[@jrago6228]

Ever use ipad with the usb only connection model?

[@TattooShopTalk]

Tell me more... my curious tenses are tingling

[@tattooartistbishwakarma]

Dear Brother , I want to know htrp 800 thermal printer works as same function like brother pocket jet series .

[@TattooShopTalk]

What is htrp 800?

[@mobilhome1824]

Can you please check what happens if you print on both sides with the PocketJet? I want to print on both sides, and I would like to know if it's possible.

[@TattooShopTalk]

What do you mean by both sides?

[@mobilhome1824]

@@TattooShopTalk You print on one side first, then you insert the paper again, upside down. Is the paper threated with heat sensitive chemicals on both sides?

[@mobilhome1824]

@@TattooShopTalk I mean if you use Brother print paper in it (not for stencils) and you try to print on both sides of the paper. Is it possible?

[@Whistler2494]

What paper are you using?

[@TattooShopTalk]

Here it's spirit paper

[@suyee4609]

Hi, my pocket jet have some problem, the paper moves through the printer but nothing appears on the paper, Im using stencil paper and also set stencil paper mode is "ON", may I know what wrong is it?

[@TattooShopTalk]

First what comes on mind would be that you either put paper in wrong, or maybe it is not correct stencil paper.

[@shreechanchitrakar1174]

just cut stencil paper . printer is made for a4 paper and stencil ra a4+ size.

[@pachicuas]

If you don’t use the app you can’t set up the heat and density correctly “ you don’t need to cut the paper man” 😅 that’s why the paper get stuck and mess the paper ! You didn’t do it correct but cool video 🫶🏻

[@TattooShopTalk]

Works pretty fine cutting paper as well if you don't want to ruin whole sheet. On windows computer you can easily adjust density in advanced printer settings. On Mac - depends on situation

[@michelkahns2345]

Just bought mine new,673 is great with Wi-Fi. It's a dummy, I bought a battery for it.

[@michelkahns2345]

Did u flip it 😂👌🏼👌🏼best👌🏼😂😉

[@TattooShopTalk]

Thanks for input. Battery and Wi-Fi sounds very comfortable

[@aaronwilliams9098]

Have one and hate it! So overpriced.

[@TattooShopTalk]

I was lucky getting them second hand then it's not that big of a financial damage

[@bonzo1384]

You use ist complete wrong just cut off the yellow shet and put it in without flipping the Image and u Fan press the Second button for a few seconds it will push out the rest oft the Papier dudeeee

[@TattooShopTalk]

I'm not sure what do you mean about - without flipping the image... Could you tell more about that

[@newmajesty281]

Right! And stop pulling on it! Just let it print out on its own. That’s how you end up with the wrinkles in the paper!

[@kdarban]

Mini USB.

[@theabominablesmokeman8296]

Bro why are these thermal printers so much god damn money lmao. I’m just gonna draw on top of the stencil paper for now sadly.

[@TattooShopTalk]

If you manage to find them second hand then it's not that bad.