How to connect bulb in parallel - how to wire bulb holder in parallel

[@bobososasosa2443]

I like your work

[@Umairworkshop]

Thank you

[@shaunscm]

Thank you, this is the best, clearest most straightforward tutorial on this that I've found.

[@Umairworkshop]

You are welcome

[@mahwishusama7864]

So easy .... Meri wall pr ik bulb lga hua hai tw mai usi sy connection ly k dostra bulb lga na cha ri thi And this video is 🔥🔥🔥

[@Umairworkshop]

Thank you

[@TawfiqAhmed385]

আলহামদুলিল্লাহ অনেক অনেক ধন্যবাদ 🎉🎉

[@Umairworkshop]

You are welcome

[@alicedavies735]

Beautiful illustration. Thank you and God bless you

[@Umairworkshop]

You are welcome

[@User-pv1rp]

Thank you, I connected two lights in our display cabinets.

[@Umairworkshop]

You are welcome

[@harshlmergal4160]

Thanks for this simple and usefull tutorial

[@Umairworkshop]

You are welcome

[@dad9296]

This is OK except for the fact that the second one you wired up was reversed. You don't want to do that. Depending on those sockets, you would have one with the bottom pin hot, and the other with the threading hot. I'm guessing the center hole is to make the bottom pin hot and the red wire will be your hot line, so the first one would have been right, but the second one would make the threads hot and a shock/fire hazard. It will still work, but it's not safe.

[@Umairworkshop]

Thank you for detail information

[@Joseph.Cairo29]

Sir can I connect 8pcs LED bulb (15watts each) in one plug? Same as you did but i will make 8pcs bulb. It is possible?

[@Umairworkshop]

Yes it is possible to connect 8 PCs bulb like this but be sure to use 23/76 wiring it can take load up to 1000 watts

[@Joseph.Cairo29]

@@Umairworkshop thanks for the info

[@youcantseeme1554]

Very useful video ❤️

[@Umairworkshop]

Thank you

[@Car.teens7]

can we add one more holder

[@Umairworkshop]

Yes can add more holders

[@DOI_ARTS]

Thank you will try this

[@Umairworkshop]

You are welcome

[@DOI_ARTS]

One question, on the second socket you put the red wire in different hole/connection? Am I right?

[@Umairworkshop]

@@DOI_ARTS yes

[@DRIP-v2b]

This was helpful. Thanks

[@Umairworkshop]

You are welcome

[@theagrilife8896]

Bro.. what about making incubator in old fridge??

[@Umairworkshop]

that is good idea

[@Ezra-pi9dp]

Very helpful😄

[@Umairworkshop]

You are welcome

[@midellazarte393]

sir ung two bulb at one extention,pag nagkamali ba ng connection puputok ang isang bulb?

[@Umairworkshop]

If you wire wrong it might You can see the series example kzbin.info/www/bejne/Y4rFi3d9iLKqhtU

[@farooqfaisal2044]

Thank you ❤

[@Umairworkshop]

You are welcome

[@sindhigamer1198]

Thanks bro 👍

[@Umairworkshop]

You are welcome

[@VamsiKrishna-zm5eb]

Very nice

[@Umairworkshop]

Thank you

[@drali2535]

Try to make a video on how to make a incubator in wood with complete details how many bulb to installed fan etc incubator dimensions length width height in short complete video. If u have already a video on this then plz send me the link

[@Umairworkshop]

here this could help kzbin.info/www/bejne/eJytgKqQmc2ojMk

[@noorsakirah]

If i want to add more bulbs, is there a maximum limit?

[@Umairworkshop]

This wire is suppose to work with 10 bulbs means 1000 watt limit

[@noorsakirah]

@@Umairworkshop ok, thanks.

[@noorsakirah]

I used 220v bulb but its exploded. The wire burn. Can you tell me what should i need to make sure it doesn't explode & to make sure the bulb not over heating?

[@Umairworkshop]

@@noorsakirah first you need to make a simple one holder wiring and check if it is working then proceed to add the second holder

[@breezybeezy713]

@@noorsakirah This is not necessarily the wiring and more depends on your volt capacity of the outlet (do not exceed the limit! 120v in US) and the wattage of the bulbs you used. I would suggest using LED bulbs because they draw less wattage and less energy. If you put too many bulbs on any one outlet, it's not going to work and can overload the circuit.

[@jayarman3972]

different watts safe?

[@Umairworkshop]

Yes different wattage is no problem

[@jayarman3972]

@@Umairworkshop Thanks! did on my brooder cage

[@Umairworkshop]

@@jayarman3972 that is good work

[@hectorbabanto5897]

can I add one or two more?

[@Umairworkshop]

Yes more bulb can be added

[@hectorbabanto5897]

Thanks!

[@JonelBautista-d5o]

Pag 6 bulbs po anong wires po ang gamit?

[@Umairworkshop]

23/76 guage wire is good for 1000 watts but if using over 1000 watts then 40/76 is recommended

[@AS-ix6hf]

problem ye ha k w1209 ,mere 100 watt k bulb ko on and off kerwata ha .jabkay dc fan 12v pe har wakt chalta rehta ha .mgra main chahta hun k mera fan bulb k sath chalay jab bulb band ho to fan b band ho jaiy.....incubator k andar

[@AS-ix6hf]

bulb 100watt 220v ac ha fan 12v dc ha w1209 ki relay se dono ko same time main kese control kron? diode+dc fan+100 watt bulb in sab ko series main ker k chala sakta hun ya nhi? 100watt k bulb ko aur dc fan dono ko dc pe chala sakta hun ya nhi?

[@Umairworkshop]

apko bulb ky sath adaptor lagana hoga jab bulb on hoga sath adaptor bhi on hoga

[@AS-ix6hf]

Acha mashwara dia mgr main pehlay hi supply k lia computer power supply use ker rha hun ab mazeed adapter nhi use kerna

[@ravindranathb.r6642]

WHICH TWO WIRES TO TWO PIN PLUG?

[@Umairworkshop]

the wire which is connected to the bulbs will go to the plug

[@ravindranathb.r6642]

@@UmairworkshopNOT UNDERSTAND

[@meerbabarali7529]

sir 1 question hai ap sy...

[@Umairworkshop]

yes please write

[@meerbabarali7529]

@@Umairworkshop sir kiya ham incubator k fan ko w1209 me direct conect kar sakty hein ... us sy circut pr asar to nahi hoga

[@tsheltrimphuntsho]

Can we connect 4 bulb ?😅

[@Umairworkshop]

Can connect up to 10 bulbs

[@ravindranathb.r6642]

Sir, HOW TO MAKE EARTH WIRING TO TWO PIN/ FIVE PIN SOCKETS?

[@Umairworkshop]

if you want to make 3 wires wiring than I cannot tell because I don't know

[@ravindranathb.r6642]

@@Umairworkshop PL.TELL TO TWO WIRES & THREE WIRES ALSO

[@Umairworkshop]

@@ravindranathb.r6642 only air conditioner needs 3 wires or other appliances which have 3 wires with them needs earthing

[@ravindranathb.r6642]

@@Umairworkshop TWO WASHING MACHINE, TWO PIN PLUG WITH GUAGE WIRE IS ENOUGH?

[@muhammadjuanda9356]

This is called as parallel not series bro..

[@Umairworkshop]

thank you for correction

[@AmericanRusticWoodworks]

With the way you wired it wouldn't one of your mogul threads be live?

[@Umairworkshop]

I don't understand

[@dad9296]

I agree, the second socket was wired in reverse, making the threads hot. It will light up but, bad idea.

[@ravindranathb.r6642]

SWITCH IS NOT NECESSARY?

[@Umairworkshop]

it can be plug in directly to the switch board like this one kzbin.info/www/bejne/g5vYqmmlbKiIjdU

[@ravindranathb.r6642]

@@Umairworkshop TRIED AS PER YOURs VIDEO THROUGH FIVE PIN SOCKET BOX, BUT FIVE BULPS IS NOT BECOME ON!!!!?, WHAT IS THE SOLVATION, FOR FIVE BULPS BECOME ON @A TIME WITH TWO PIN PLUG?

[@ravindranathb.r6642]

@@Umairworkshop IF WE PLUG FIVE BULPS WIRES TO THE JUNCTION/ EXTENSION BOX, IS IT NOT BECOME SHORT CIRCUIT PL.,

[@Umairworkshop]

@@ravindranathb.r6642 have you wire the 5 bulbs in parallel and the plug is put on in the one socket , or you wire the bulbs single and turning 5 bulbs on at same time ?

[@Umairworkshop]

@@ravindranathb.r6642 what are the wattage of bulbs , you should use high guage wire if trying to on 5 bulbs at the sane time

[@AS-ix6hf]

isy series nhi parallel kehtay hain broooo

[@Umairworkshop]

parallel ka matlab yeah Hai ky donu bulb ky connection direct main wire say attach hotay

[@kuyskoko00]

It will explode

[@Umairworkshop]

No it do not

[@ravindranathb.r6642]

FAST WIRING 😥😥👎👎👎👎👎👎

[@Umairworkshop]

this might help kzbin.info/www/bejne/mpvIk2B7rdNmprs