TB6600 Stepper Motor Driver with Arduino

[@Ockhamcool]

Thank you so much for this wonderful and clear tutorial! You are an EXCELLENT instructor. I have many years of electronics experience (mostly vacuum tube stuff) but little automation or Arduino experience. However, thanks to your tutorial, everything made perfect sense. In particular, I want to commend your clear and plain identification of the details. Things like exact driver module model and wiring pin outs, schematics and so forth. This kind of info can take a lot of time to root out, and the manufacturers seem oblivious to the need to post it. Your pacing was just right - not too slow, not too fast - and you DID NOT ASSUME that "people already know that". Many do, some don't. Also, the Arduino code was extremely helpful, plus your handy tip on discovering motor winding orientation is worth the price of admission! Well done and thank you. Great job!

[@rajjabi101]

How can I program my stepper motor with three different position and at the same time will return to its original position. Using three push button as trigger Thanks

[@sharanyopramanik1235]

USE AS5600 MAGNETIC ENDCODER

[@drinski6720]

What is min and max microseconds delay between after HIGH and after LOW digital write ?

[@geminiman2831]

What is the use of half current and full current? Currently I am using dm542 and nema 17! What pulse per revolution should I choose for nema17? And does more pulse means more speed?

[@curtisrussell5094]

Can anyone show me a picture of a wiring diagram for 3 stepper motors for a cnc?

[@abdulkadirkhan5112]

HELLO SIR PLEASE INFORM ON THE PART NUMBER OR MODEL OF THE DC POWER SUPPLY YOU HAD USED. ALSO IF THERE IS NO SPECIFICATION OF THE VOLTAGE OR CURRENT OF THE MOTOR THEN WHAT TO DO.

[@hiu8819]

I tried to do the same wiring and setting according to the video, but why the PWR/Alarm keep blinking and the the motor doesn't rotate🤧?

[@Рейкизубчатыедляреечныхдровоко]

Вопрос на засыпку. Как подключить Автономный контроллер перемещений ZK-SMC01 к драйверу тв6600 тот что на с алюминиевым радиатором, слабо вам сделать такое схему.

[@shivamverma1786]

Which motor do u use nema 17 or nema 23?

[@hcreval]

hello , How can I program to put the motor in zero position?

[@TheSimonDavidson]

@MYTECTUTOR Can you advise what power supply you're using, and a link to purchase if possible?

[@krzysztofgutek6249]

Hey. If I think right, I can use for ex. PIN 7 instead of PIN 8? I want to connect motor and LCD keypad shield (which uses pins 8-13)

[@robertorodriguez1088]

Can the ENA and DIR inputs be supplied by more than 5V? Will it work with 12V?

[@drinski6720]

If you wish to control driver with more than 5V, you have to use proper resistor to lower the voltage to 5V

[@theroebuck123456789]

Hello, can I ask what's the part that you connect to the 9v power supply? I've been looking for what that thing is called

[@calorus]

It's a DC Power Connector

[@noithugian494]

Can you make videos using STM32F1 and TB6600

[@EvanRuzycky]

I like your video, thank you! Any idea why I would need to re-upload the code each time for it to work again?

[@marianacatrinei1255]

Very helpfull with the wiring. I used a v3 shield . Makes wiring simple

[@wallstreet497]

Bro if I connect a separate encoder on a HBS57H hybrid servo driver and add a stepper motor in the driver wiring will it work ? Also can you make another wiring using a NPN configuration to teach people not to burn their drivers .

[@ajipamungkass2703]

Can we do it with ultrasonic sensor?

[@furkanaltun2116]

i am going to try that, it worked with the cheap motor

[@rafaelalvesdasilva6754]

Thank you for the great class teacher! Worked perfectly. Big hug.

[@dr.fzt.rafetirmak7713]

this is a great tutorial for beginners

[@hansclausen4735]

Thank you so much for tis video and code, it was just was I was looking for!

[@kleberazevedo2997]

thank you so much by the tutorial, congratulation from brasil

[@sergiopaixao6882]

parabens pelo video, e obrigado por compartilhar seu conhecimento, com a gente !!!

[@Drxxx]

Cool tutorial, i like your channel!

[@123A-Z]

I will subscribe after execution Thank you 👍

[@RixtronixLAB]

Creative video,thanks :)

[@arduinomaquinas]

Nice 😉👏👏👏👏👏👏

[@SilviuSeico]

Very loud in full step, my recomandation is to buy one original. My one has a SMD IC not a THT and i think it is a fake.

[@freytube1]

well done

[@মোঃসোহাগইসলাম-ব২হ]

মিন মিন মিন মিন , চিরবির চিরবির এই শব্দটা কোথায় বেশি ব্যবহার হয়?