TBR fork triple clamps & WP Xplor Pro 6500 cartridges

[@davidciesielski8251]

Hi, very kind of you to share this. The 20mm would add 2 mm of trail, more stable/ more self centering... 22 would be easier to turn ...less stable. Concentric, means in line on center....

[@enduro-parts-aus]

Had no idea about the clamps making that much difference , very interesting !

[@ktmcharly1269]

Thank you for the informative video in regards of the 6500 montage. Mine will come soon...

[@123PetrolHead]

Good video Carl, just fitting a set to the bike now. Looking forward to testing them out soon!

[@ssse3123]

He did not install the hydrostop tube to the fork. Are the fork lugs wrong type?

[@zbyh1980]

Thank you for making this video, very helpful. I just bought a set of XPlore 6500, and my question my sound stupid.: so there is no need to put oil in the smaller internal chamber (the one which has a top cap)?

[@hugobaert7737]

Great video, watched it twice actually. Just rode a friends bike with WP closed cartridge and compared to my stock bike there is just not even a comparison; needless to say I was fast, stable, safe and comfy. I’m going for the works myself too, however instead of the xtrig clamps I`m interested in these bar clamps but can’t seem to find a way to source them? It’s for a gas gas 250 2023 Anyway thanks for the video Cheers

[@MrPindie]

Excellent video. The 6500s seem just like my cone valves but just with a mid valve shim stack instead of the cone. At last, another great WP fork.

[@enduroskillstraining]

Rode them today. Absolutely amazing. 3 other people rode the bike and said the same. 👍😎

[@diygreasemonkey201]

@@enduroskillstraining did you revalve the 6500 or went with WP out of the box settings?

[@enduroskillstraining]

@@diygreasemonkey201 out of the box settings 👍😎

[@michail1963]

Any idea how they compare to Dal Soggio spheres?

[@tomasvelecky181]

@@michail1963 Hi, I have Dal Soggio a few days and it's amazing. Only now does one know how weak the original WP xplor is. It really only works at low speed. But I have no comparison with the Pro 6500.

[@jameskerr_89]

Can you PLEASE do a video explaining the internals of the WP cone valve fork and how to tune your cone valve fork????

[@MrNz96]

You're channel is quite informative and gives in depth info, thank you Can you do a video about what pants and jerseys do you wear?

[@VikVik-je8go]

Nice video, and to the preload of spring what are the settings?

[@erikobergg]

Nice clamps, i also bought 6500 cartridge, had Öhlins ttx before. Wp valving is better and easyer to service by myself.

[@MikeTapp-mc1hc]

Did you go with the 4.0 springs?? Seems light…?

[@enduroskillstraining]

I use 4.6 and weigh 90kgs

[@muratersahins]

Great video, Carl. Now ı see, why peoples get a special triple clamp. Thanks!

[@ultimatebathroomrenovation3594]

Great video... What did you end up setting your comp / reb clickers at? Did you stick with the recommended setting of 18 rebound / 16 compression? Thanks

[@tomasvelecky181]

Hallo... can you more explain the behavior of the motorcycle and the offset settings? Have you tried both settings or chosen straight 20mm?

[@cuddleman]

hi didi you ride xplor pro aer?

[@enduro2480]

how much is TBR fork triple clamps?

[@industry1344]

Who is the manufacturer of his spring measuring tool?

[@andrewwilson8123]

where can i find those clamps?

[@arronwalton8840]

Is there going be a follow video up to settings and how they are or was they just set at one setting and not touched again many thanks

[@dirtbikefun]

Excellent info thanks Carl.

[@amigosdostrilhosteam3950]

Level oil used? 360ml,370ml,380ml

[@michail1963]

I got xtrig ROCS - do you think the TBR clamps are better compared to ROCS or very similar? The TBRs definitely look mint.

[@niallbowker212]

Where can you buy these from and what’s cost cheers

[@mihaidobrescu7430]

Hi Carl. Where can you buy this clamps in Europe ?

[@enduroskillstraining]

I bought these direct from SA, was delivered in 4 days by DHL

[@grantmotox123]

eurotek tbr conversion vs 6500. which do you think is better taking the price difference out of the question. or is one better than the other in certain situations?

[@ridingwithtrent]

6500 cartrages are a closed carterage system the tbr conversion is still a open cart set up , the 6500s are the best bang for buck

[@grantmotox123]

@@ridingwithtrent i got the 6500 now. they are epic

[@hurelllucieer6225]

Informative video, thanks.

[@0cernnunos0]

Cool. Very informative.

[@dave175a]

Nice informative vid

[@sakariputtonen2683]

bolts were dry and thus had more than 12nm...

[@enduroskillstraining]

No, we checked it on 2 seperate triple clamps before recording. Was the same every time.

[@robb-smith6328]

Wouldn’t it being dry cause more friction therefore when torque wrench clicks it actually is less clamp force?

[@182mcg1]

For africa twin 1100 l Long travel fork

[@rogermelling8941]

Just gonna nip outside and loosen my fork punch bolts 🔩 jeez stock clamps are rubbish

[@jeffdellibovi2845]

Motor oil better

[@250txc]

TI bolts? lol ... Don't need anything along these lines and I like the $ in my wallet and don't turn loose of it very easily...