TBS Crossfire Nano TX is Here 🔥 Crossfire Nano Module & Retrofit kit !

The Crossfire Nano TX is HERE!!! Let's be the first ones to check it out! What all does it have to offer? What is this weird plastic thing it comes with?! DRAINMAN I just bought the Micro TX V2 what ever will I do ?!! No worries my peeps you will just use this sweet Retrofit Kit! Watch the Video!
▶️Where to get your very own Crossfire Nano:
✔️www.myfpvstore.com/radios/tbs-crossfire-nano-tx/
▶️Save money! Get the Starter Kit:
✔️www.myfpvstore.com/radios/tbs-crossfire-nano-tx-starter-set/
▶️Already have the Micro TX V2? Retrofit That Bitshhhh
✔️www.myfpvstore.com/radios/tbs-crossfire-nano-tx-retrofit-kit/
▶️How to set up the Crossfire Nano RX:
✔️kzbin.info/www/bejne/ZmbTdZ6oiq18btk
▶️How to set up Crossfire SHOT:
✔️kzbin.info/www/bejne/bJnVfaCkd7Omd80
▶️How to set up Crossfire WiFi:
✔️kzbin.info/www/bejne/mnK2mYilq7WCgaM
▶️How to get the Open TX Companion:
✔️kzbin.info/www/bejne/lZ6XlK2PnZlsiKc
▶️Save your files before you do anything:
✔️kzbin.info/www/bejne/opWcnJaDds6tq6s
▶️How to flash new firmware to your radio:
✔️kzbin.info/www/bejne/nH68oKyGZ9iffqs
===▶️www.patreon.com/drainmanfpv
▶️MyFPV Slidez:
✔️www.myfpvstore.com/i09w
▶️Blue Loctite:
✔️amzn.to/3fB0lqL
▶️When A Motor Rips Off:
✔️kzbin.info/www/bejne/fWSTeHSKgdxosMU
▶️How To Set Up LED's
✔️kzbin.info/www/bejne/h2HdmJ13mJ6Bp80
▶️ES121 Electric Driver:
✔️kzbin.info/www/bejne/fITcd62spLmVkLc
▶️If You Want The Beast by iFlight:
✔️amzn.to/354KxqW
✔️www.myfpvstore.com/unm5
▶️iFlight Beast Review!
✔️kzbin.info/www/bejne/pJfaZ3auotiWl6c
▶️iFlight Beast Build & Flight Video!
✔️kzbin.info/www/bejne/lXe9l599e5p0e80
▶️Crossfire Nano SE:
✔️www.myfpvstore.com/koh7
▶️Unify Pro 32 HV:
✔️www.myfpvstore.com/2h0e
▶️Caddx Air Unit for DJI
✔️www.myfpvstore.com/36cn
▶️Custom DrainMan Motors!
✔️www.myfpvstore.com/iydp
▶️Smoke Stoppers:
✔️amzn.to/3tsWhhq
✔️amzn.to/2YL7trB
✔️amzn.to/3tsMt77
✔️www.myfpvstore.com/8bf3
▶️All Drone Pilots Need A Power Supply! Build Your Own!
✔️kzbin.info/www/bejne/bmHRfqSFbrmEn5Y
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
kzbin.info
www.patreon.com/drainmanfpv
▶️If you want to learn about LED's:
✔️kzbin.info/www/bejne/h2HdmJ13mJ6Bp80
====▶️My Scope:
✔️amzn.to/2Y7NUtc
====▶️Cheap Version:
✔️amzn.to/2PC8Ogj
▶️DJI Air Unit: ($4 Cheaper Than Anywhere Else & 2 Day Shipping)
amzn.to/2PjqUDi
✔️or
✔️www.myfpvstore.com/7ts8
▶️How To Taranis:
✔️kzbin.info/aero/PLE-EjNqyKwcgHSszEqAgMqrZD1JuBOUez
▶️My Electronic Screwdriver:
✔️kzbin.info/www/bejne/fITcd62spLmVkLc
▶️My Soldering Iron:
✔️amzn.to/2Oj95XS
▶️My Soldering Iron Tips:
✔️amzn.to/39IT453
and
✔️amzn.to/2Oj7r8C
▶️1.5mm Driver:
✔️amzn.to/3txYarX
▶️Radio Receivers:
✔️www.myfpvstore.com/radios/radio-receivers/
▶️Hobbywing:
✔️www.myfpvstore.com/lufc
or
✔️amzn.to/31e6jFM
▶️Loctite:
✔️amzn.to/39QY5HE
▶️Screw Pack:
✔️amzn.to/2BPzBSq
====▶️How To Set Up A Throttle Cap: (Become A Better Pilot)
✔️kzbin.info/www/bejne/j5SVXoGah8d7nLM
====▶️My Go To Pack:
✔️4s : www.myfpvstore.com/t83u
✔️6s : www.myfpvstore.com/fyk0
====▶️Flight Controllers:
✔️www.myfpvstore.com/940s
====▶️ Quadcopter Frames:
✔️www.myfpvstore.com/quadcopter-frames/
====▶️ The Goggles I use:
✔️amzn.to/3sQ5ksu (Comes w/ 2 Modules)
✔️Analog - www.myfpvstore.com/5ff6
====▶️My Radio:
✔️amzn.to/3sU9Fem
✔️Non-DJI: amzn.to/39dqI3c
✔️HD - amzn.to/2AVAEQo
====▶️ Video Module That I use (When Using Analog):
✔️ www.myfpvstore.com/s1mh
====▶️Bench Power Supply:
✔️amzn.to/3cpIOhE
====▶️Field Bag:
✔️www.myfpvstore.com/l1z9
or
✔️amzn.to/2TleAns
or
Ethix:✔️www.myfpvstore.com/m3om
====▶️My 3D Printer:
✔️shop.prusa3d.com/en/3d-printers/180-original-prusa-i3-mk3-kit.html?gclid=Cj0KCQjwqs3rBRCdARIsADe1pfTfQC1uJs3mXhPKfoJIxOmfZgpRX9lPjZ2P25BSjEVf9uqq85LlxqAaAp9OEALw_wcB
====▶️My Camera Used:
✔️amzn.to/2wX0eCg
====▶️My Cam Mic:
✔️amzn.to/3b2ZoUZ
====▶️Contact Me: @DrainManFPV on FB or [e-mail]
====▶️I'Gizzle: drainmanfpv
====▶️www.patreon.com/drainmanfpv
#Crossfire #Nano #TX

[@jdm724]

Good video man! Like your way of explaining. Fast and to the point. No 30 minutes blablabla. I subscribed

[@Ger.FPV2023]

This video was amazing! Thanks very much for being so informative and I love the way you describe and explain everything, so clear and simple! Keep going like that please! 👏👏👏

[@slowridefpv9668]

He’s one of the best how to guys in my opinion. His videos have helped me many times. Most recently with a flight controller I was having issues getting into boot loader.

[@whitmeade4834]

I watched this video a few months ago and because of the information, I successfully used my solder sucker and swapped my TBS Crossfire micro tx v2 to the nano tx case. Thanks a lot for making this video.

[@AndreiC08]

I was about to order the R9M Lite Pro for my X-Lite, but then this came out.. Preordered it asap 😁 Waiting for mine to arrive. Thanks!

[@chrismillersrcfamily]

Awesome. You got my back👊🏼Crossfire is coming in the mail nexts

[@griffmoss2549]

Thank you for showing me this!!!!!

[@FindmeFPV]

I was waiting to see it looks like on xlite since anouncment and now you made me spent 70 bucks haha. Thanx and keep it up with channel. Great content💪

[@sleepingbearffg5008]

I preordered got 3 nano rx with antennas and nano 125 get fpv 👊👊💪💪

[@markiemark7018]

Sleeping Bear same here haha 🔥

[@jelojones]

Thanks for that video. I am just amazed at how nothing in this hobby comes with instructions. It was a simple swap.

[@pleiadianpilot5076]

I installed this on my qx7 last week along with the inverter. It's fucking wicked. I highly reccomend the long shot antenna too

[@danialaire]

Super Chingón, Gracias Bro!!!

[@reviewguru5457]

scary looking dude.. AWESOME LOOKING EQUIPMENT

[@tabarnakdecris6917]

you are really clear thanks

[@JohnnySnipes]

legit just got the micro v2 in the mail today for my jumper t12

[@groovykyara6833]

That blue remote tho 😂😌

[@brandonpurdy7658]

Get the bundle deal with 3 receivers and the module for $129.00. Several stores are running this deal.

[@markiemark7018]

Finnally something that fits my xlite 🔥😍😍

[@shayjordan1899]

I can’t get mine to work it’s bound but not working with the xlite

[@goesboom5416]

Thank u bro!

[@michael3573]

New sub. Dig it.

[@A1phaZu1u]

So I tried to use the TBS retro fit kit and the main issue I ran into was that the Micro TX V2 has pins on the bottom left corner that have to be either desoldered or alternatively a hole would have to be cut into the back plate of the retrofit kit in order to get it to work without taking a soldering iron to the crossfire tx.

[@CarbonGlassMan]

Ugh. I have the Micro TX v1 and an X9 Lite. I really need to upgrade to this. Not just so it fits the radio better but also to be able to go from 250mw to 1w.

[@rubengauthier-lafaye354]

So if I understood it well you can now fly an frsky quad with the taranis x9 lite and fly a crossfire quad with the same controller with just setting the tbs crossfire nano tx?

[@JULIANysuHOHNER]

I have the xlite 9 would it make a big diference compare without crossfire?also do i have to buy receivers with crossfire so i can bind it easy?

[@jdm724]

Can you check in the fsrky lite menu of you can select 150hz forced mode?

[@RYVENANT]

Do you think the retrofit would work with the Tracer internals? I just got the TBS Micro for my Taranis. My Taranis is now officially dead. So I'm trying to figure out how to get the Tracer Micro module onto the Tango 2 bay adapter (nano size)

[@sleepingbearffg5008]

Pre ordered.. and I still dont have mine?? Great video but could put crossfire on xlite for long time ?? Xlite rocks! Great range for 90 percent of parks. Passed on ghost for time proven crossfire and ghost needs same adapter to fit crossfire..looking forward to exploring with dji goggles.last thing who did you prefer order from? Thanks3👊👊💪💪

[@xPureL]

I have this module, but at sd card I only find the crossfire micro tx, (long) pressing enter doesn't start the setup. Am I missing something? Do I need to get a Tbs Nano TX software for on the SD card? Or should the Micro TX work?? I'm a bit stuck here...

[@Neukom720]

just a question man and Im sure other people are asking it, if you just leave the x9d lite back cover on does it still fit on the x-lite with just a slight angle? I don't have one but I was curious cause I bought the retrofit kit already and got the xtl file for the full size and am gonna have my friend print the back cover for one of my full size crossfires so I can have 1w-2w output power on my Tango 2 Pro v3 pcb and fly my wings with the tango instead of having to go my full size tx which is nice cause I love my Tango 2 pro! I also might try just using the jr to jr lite adapter I just got in the mail too and see if I like that but I bought the retrofit kit just for the little pcb, cause Trappy said you needed it for the full size conversion on one of the streams, and incase I wanted it a little lower profile ya know and it was like 7 bucks so whatever lol

[@aberod0072]

So the R9M can produce 1w with this external adapter, and the tbs tango 2 produces only 250mw with an internal module? What the...are they doing?

[@fnkycoldmedina]

once you flash your x lite to use crossfire can you then still switch back and forth from crossfire to frsky protocol ? can i still use my frsky stuff after the firmware flash? thanks

[@moimeme8864]

have they decided to make only Crossfire NANO TX modules in place of MICRO modules ?

[@angelfpv4825]

So i got a tracer nano tx but planning to get tx16s so it needs the micro tx can i get a jr shell for it?

[@headskull]

Is thare any adapter to fit the Nano TX to a normal JR bay?

[@coribee3799]

how to get crfs on my x9lite löl the ibutton doesent help me

[@nerdCopter]

+1👍 holy crap how do you get all this stuff 💪 (i presume you not paying full price for all these review models)

[@sleepingbearffg5008]

I preorder in August... 125 3 nano rx with antennas. Love my x lite 3 years old. Works great..went with crossfire over ghost.. time proven.. 👊👊💪💪

[@MrBrettStar]

Is the crossfire nano tx 1w or 250mw, I’m reading conflicting info

[@rcnightlife9611]

Wow, you got a bunch of drones. I need to get one one day.

[@sleepingbearffg5008]

Going to love hobby..I personally dont know why they keep so many hanging on wall? I'm giving away all my analog to the small group of friends who always support me. Even after trolled by some fpv army! PHYSCOFPV..CHOSHISEFPV in army asshats. Lol love hobby!

[@sleepyheadfpv1507]

It’s a blast. Just don’t get caught up in the drama. Fly what you want. Just make sure to be safe and tear it up!

[@ssbsts312]

@@sleepingbearffg5008 arnt you just a humble helper

[@krishnachaitanyakanukuntla3620]

Is it same for X9 lite s Access?

[@tomsop]

I have a question on the nano RX - I connected it to my micro TX and for whatever reason I am only getting 1:100 LQ and my rssi shows as 16 but this is at the table where my taranis x9d+ is showing 100% LQ and graphical rssi on main display shows it as full bars. I have micro TX set for 1W and dynamic power and I have the nano set for dynamic power. When I change the nano rx to just the 150hz I get zero and no telemetry - so I amthinking there is perhaps something wrong with the nanorx itself?

[@tomsop]

I forgot to add I should be getting at least 2:100 or so but limited to jiust 1:100 and 16 rssi at my desk while configuring everything. Seems very weak.

[@OnlyRowdGaming]

where can i find the lua script at?

[@timmytson1]

Will it work with tx16s

[@tokmolboto7405]

Idol does it work for qx7 ?

[@wreckdproject]

Talks like he’s doing a gotdam infomercial

[@Jackrichardsvids]

the bootloading tutorial got be open tx on the sd card but how do you set up the crossfire module

[@DrainManFPV]

Set up your sd card contents and then set up your receiver. You can find that in my Taranis playlist and setting up the receiver is this video: kzbin.info/www/bejne/ZmbTdZ6oiq18btk

[@Fernybeme]

Sir, the specs on the nano show only 100mW capability. Am i missing something or why do you claim that it is 1W capable?

[@alien-oo-_-oo5732]

Can you pls do a tutorial on how to do a conversion from nano tx to micro casing? I don’t see any videos on it.

[@monkeymang13]

Looking for the same thing

[@alien-oo-_-oo5732]

@@monkeymang13 it’s actually easy, I don’t remember the steps to explain it but I think I just had to sotter the pins together and hook it all up, there’s one part you won’t need I think you just need to unplug it and remove it.

[@kaaloone]

any chance they make a retrofit for v2? what if u wana upgrade from nano to v2

[@yannickg6904]

There is. Fortunately, the boards are the same... www.team-blacksheep.com/products/prod:xf_nanotx_retrofit

[@kaaloone]

@@yannickg6904 you didn't get my question..i mean from nano upgrade to micro, not the opposite.

[@yannickg6904]

@@kaaloone Aahh. Good question.

[@henrykim4535]

Where’s the 1-800 number to call? My charge card is ready!

[@teurisleonardo8229]

A un video intalacion xlite

[@splif7773]

So do you buy all these parts out of pocket or do these companies pay you to review their stuff? What is the point of having more than one transmitter cause I'm sure you probably buy everyone right when it comes out?

[@sk1fpv]

No fucking sticker. Really. Damn

[@arnobvlogs2862]

What happen to your tooth🤔

[@oneperspective8601]

X9 lite was one of the shittiest designed transmitters imo

[@bjoernhallandsen5287]

Why are you shouting instead of speaking? Do you think we are deaf - or do you think it makes your video better?