TD - How to construct a Hypocycloid

  Рет қаралды 43,769

Derick Frederick

Derick Frederick

Күн бұрын

Пікірлер: 50
@dorcasolanrewaju-abdulai7518
@dorcasolanrewaju-abdulai7518 Ай бұрын
This is really explicit,tnx
@derickfrederickTD
@derickfrederickTD Ай бұрын
@@dorcasolanrewaju-abdulai7518 you're welcome 👍🏼
@BhavyaHemani1
@BhavyaHemani1 2 ай бұрын
bro thank you so much for this tutorial…appreciate it
@derickfrederickTD
@derickfrederickTD 2 ай бұрын
@@BhavyaHemani1 you're welcome 👍🏼
@amosekutan5352
@amosekutan5352 Жыл бұрын
The work is very clear, welldone
@derickfrederickTD
@derickfrederickTD Жыл бұрын
Thanks 👍
@chimdinmaobi-wy1ds
@chimdinmaobi-wy1ds 9 ай бұрын
Please I've been trying to an assignment on both epicycloid and hypocycloid but with the measurements I was given it never makes a perfect curve like the way it looks when you do it. Is it that I did it wrong or that every measurement has a different way it curves
@derickfrederickTD
@derickfrederickTD 9 ай бұрын
It might be you making a mistake.
@Berachahmovies
@Berachahmovies 7 ай бұрын
Great job 👍
@derickfrederickTD
@derickfrederickTD 7 ай бұрын
Thanks
@davidadebayo2121
@davidadebayo2121 3 жыл бұрын
Great tutorials there, please can you do an assembly drawing, on page 166-167 of the J.N.GREEN textbook please, I'll really appreciate it. And also keep up the good work
@derickfrederickTD
@derickfrederickTD 3 жыл бұрын
Thanks for reaching out David Adebayo I really appreciate. The two examples in the pages u mentioned are quite simple but you must have a sound knowledge of orthographic projection to be able to understand how all three views would appear. I uploaded video tutorials on introduction to Orthographic projection, you might want to check them out on my page. This will help you to a very large extent in understanding assembly drawing. However, I will see to your request. Thanks 👍
@davidadebayo2121
@davidadebayo2121 3 жыл бұрын
Thank you
@davidadebayo2121
@davidadebayo2121 3 жыл бұрын
And i've also viewed the orthographic drawing
@kidhubServer
@kidhubServer Жыл бұрын
Bro thought me more than my college eng.drawing teacher ever will.
@derickfrederickTD
@derickfrederickTD Жыл бұрын
Pleasure 🙏🏾 😁
@oluwamayowaajala7307
@oluwamayowaajala7307 3 жыл бұрын
Very helpful. Thank you so much
@derickfrederickTD
@derickfrederickTD 3 жыл бұрын
You're welcome Mayowa👍 Thanks for reaching out. ✊
@cliffordmattu7076
@cliffordmattu7076 2 жыл бұрын
Thanks sir pls sir do you have any video on curve of intersection of similar solids
@derickfrederickTD
@derickfrederickTD 2 жыл бұрын
You're welcome 👍 @clifford. Yes I have videos on intersection of solids.... Go to my playlist and click on intersection of solid, you will find the videos there.
@cliffordmattu7076
@cliffordmattu7076 2 жыл бұрын
@@derickfrederickTD sir nothing is on the playlist
@derickfrederickTD
@derickfrederickTD 2 жыл бұрын
@@cliffordmattu7076 Really? Give me a moment, will get back.
@derickfrederickTD
@derickfrederickTD 2 жыл бұрын
@@cliffordmattu7076 Hello Clifford, please do check the playlist again they are all showing now. Apologies for the inconveniences. 🙏🏾
@fit_gloz
@fit_gloz 4 жыл бұрын
Thanks alot for ur tutorials
@derickfrederickTD
@derickfrederickTD 4 жыл бұрын
You're welcome... Thanks for the feedback... Preciate. 👍
@fit_gloz
@fit_gloz 4 жыл бұрын
@@derickfrederickTD pls can u do another tutorial on mechanism without the instrument you used on ur last tutorial 🙏🙏🙏
@derickfrederickTD
@derickfrederickTD 4 жыл бұрын
Do you mean another arrangement of link mechanism other than the simple link mechanism I already explained on my channel?
@fit_gloz
@fit_gloz 4 жыл бұрын
@@derickfrederickTD yes sir
@derickfrederickTD
@derickfrederickTD 4 жыл бұрын
OK then. Please watch this space, will drop a few more examples on link mechanisms and more pretty soon. Thanks for reaching out... Preciate 🙏
@chiomaejealor7750
@chiomaejealor7750 2 жыл бұрын
Thank you so much U really saved me
@derickfrederickTD
@derickfrederickTD 2 жыл бұрын
You're welcome 👍 ☺
@okolosichristiana8756
@okolosichristiana8756 Жыл бұрын
Thanks it helped a lot
@derickfrederickTD
@derickfrederickTD Жыл бұрын
You're welcome 👍
@Chi-chi-q8v
@Chi-chi-q8v 7 ай бұрын
Pls use a better camera next time (no hate) but I really have difficulty in seeing the construction or bring the phone closer pls it's just a request I can't really see much as intended 🙏🙏🙏❤️
@derickfrederickTD
@derickfrederickTD 6 ай бұрын
You might wanna adjust the view settings on your KZbin... Set it at high quality it will be clearer.
@Thee_steward
@Thee_steward 2 жыл бұрын
Thanks, this is great
@derickfrederickTD
@derickfrederickTD 2 жыл бұрын
You're welcome
@PrettygirlPercy
@PrettygirlPercy 2 жыл бұрын
So the circles were never necessary
@derickfrederickTD
@derickfrederickTD 2 жыл бұрын
Yeah... No point drawing all circles as focus is only centred on points of intersection with the radial lines. The numerous circles were only indicative of the movement pattern, however, a beginner might be confused hence it is better to state it clearly for comprehension purpose.
@tobiadeiza2018
@tobiadeiza2018 3 ай бұрын
Bro abeg try to use clear camera this one too dark
@derickfrederickTD
@derickfrederickTD 3 ай бұрын
@@tobiadeiza2018 No vex na KZbin drop the quality... However increase the brightness 🔆 of your phone it would be better. 👍🏼
@chika689
@chika689 7 ай бұрын
Tnx
@derickfrederickTD
@derickfrederickTD 6 ай бұрын
You're welcome 👍🏼
@KatoGeraldthabulha-tj3tt
@KatoGeraldthabulha-tj3tt Жыл бұрын
Thanks for the lecture but accent is not easy
@derickfrederickTD
@derickfrederickTD Жыл бұрын
Thanks for the feedback... However, I'm a Nigerian, English is not my first language. Thanks for bearing with me 🙂👊🏽
@mitchelawino6566
@mitchelawino6566 Жыл бұрын
You drawings are not visible enough I don't see it clearly
@derickfrederickTD
@derickfrederickTD Жыл бұрын
Adjust your KZbin settings to high quality.
@Chi-chi-q8v
@Chi-chi-q8v 7 ай бұрын
​@@derickfrederickTDyou said to adjust the quality it's not available pls after the construction of the curved lines in order to begin the main thing where do we cut from
@derickfrederickTD
@derickfrederickTD 6 ай бұрын
@@Chi-chi-q8v while the video is playing, click on the settings symbol ⚙️ when u touch the screen. Then click on "Quality" from the list of options. Then set your view on the highest in the list, it would improve the quality.
TD - How to construct an Epicycloid
8:22
Derick Frederick
Рет қаралды 62 М.
TD - Superior Trochoid and Inferior Trochoid. @derickfrederickTD
30:14
Derick Frederick
Рет қаралды 16 М.
How to have fun with a child 🤣 Food wrap frame! #shorts
0:21
BadaBOOM!
Рет қаралды 17 МЛН
ССЫЛКА НА ИГРУ В КОММЕНТАХ #shorts
0:36
Паша Осадчий
Рет қаралды 8 МЛН
How to draw an Epicycloid in Engineering Drawing.
9:58
ADTW Study
Рет қаралды 169 М.
TD - DEVELOPMENT OF A TRUNCATED CONE
26:04
Derick Frederick
Рет қаралды 57 М.
Cycloid in | Technical drawing
6:21
MAEKLL TECH
Рет қаралды 41 М.
How to Design a Wheel That Rolls Smoothly Around Any Given Shape
21:58
Morphocular
Рет қаралды 1,7 МЛН
Construction of Cycloid
12:06
Sir Hamilton's Technical Drawing Lab
Рет қаралды 12 М.
Cycloid// Engineering Drawing
20:06
Engineering Classes By Dr. NOORI Banu(IITian)
Рет қаралды 1 МЛН
How to have fun with a child 🤣 Food wrap frame! #shorts
0:21
BadaBOOM!
Рет қаралды 17 МЛН