The best 3D prints to organise your life - Part 2

  Рет қаралды 327,169

Teaching Tech

Teaching Tech

Күн бұрын

Пікірлер
@bequ3
@bequ3 Жыл бұрын
Thank you for featuring my cable clips, Michael! I was perplexed by yesterday’s download numbers and just saw a comment from the user goTVm over at Printables, who mentioned you'd posted this video. Let me point out that not only KLAMMA, but KLIPPT as well is “tape-compatible” with the other base plate (At least in light-duty applications.) This makes once printed clips even more versatile because you can interchange them easily.
@WidgetsInc
@WidgetsInc Жыл бұрын
Same here! I was wondering why there was a spike in views and downloads. Thanks for featuring the Diffusion Panels. That timelapse looked amazing! These were modeled so that the deepest point on the front would touch the back panel in vase mode, making it more rigid and stay flat, assuming a .4mm nozzle and .3mm layer height. I am curious what slicer settings could be tweaked to make that happen on his and other printers.
@BladeScraper
@BladeScraper Жыл бұрын
The Gravity Broom Holder is my favorite by far, very clever
@jemoeder4096
@jemoeder4096 Жыл бұрын
hi back, im dad
@knightmare1442
@knightmare1442 Жыл бұрын
damn too slow
@alexanderpinney
@alexanderpinney Жыл бұрын
Hi dad, I'm dad... Wait.
@rallywagon261
@rallywagon261 Жыл бұрын
Once you're a dad, it never gets old.
@ShotGunner5609
@ShotGunner5609 Жыл бұрын
Got em!
@johnnyv9024
@johnnyv9024 Жыл бұрын
🏆
@Amethyst_KB
@Amethyst_KB Жыл бұрын
Wow, that broom holder surprised me. And the trunk velcro was a great idea too.
@ausfoodgarden
@ausfoodgarden Жыл бұрын
That gravity broom holder looks way better than the commercial one I bought and don't use because the brooms etc. always slide down over time. I'll be printing a couple of those for sure.
@RomanoPRODUCTION
@RomanoPRODUCTION Жыл бұрын
He is back and he is still adorable. Bro Hugs.
@steveman1982
@steveman1982 Жыл бұрын
I need to print some of those broom holders, such a jungle of tools in the shed :)
@paulpolley4837
@paulpolley4837 Жыл бұрын
Always appreciated! good recommendations as usual! I love the head-rest clips and the velcro trunk brackets work fantastic!
@JenSalik_
@JenSalik_ Жыл бұрын
Another great video which presents solutions for everyday nuisances or ideas for doing something better.
@StacieDude
@StacieDude Жыл бұрын
I will be printing the angled business card holder and the velcro trunk organizers. Thanks for another helpful video. Joel, Texas.
@1techshorts234
@1techshorts234 Жыл бұрын
I am 100% using most of these prints!!! Had you not made this video I would have never found some of these. Thank you so much!!!
@suivzmoi
@suivzmoi Жыл бұрын
i can confirm the broom holders are great. the design is very creep resistant (the biggest problem with load bearing 3d prints) and the 10 or so that i have printed are still working after more than a year. they also work just fine when all parts are printed at 80% scale. i use rubber bands for grip and dont mind having to replace them every few months or so when they inevitably degrade and crumble.
@MCsCreations
@MCsCreations Жыл бұрын
Awesome! Thank you, Michael! 😊 Stay safe there with your family! 🖖😊
@philcaruso1778
@philcaruso1778 Жыл бұрын
I've always loved watching your videos. Now that you gave my Universal Key Cover a nice review, I love them even more! Thanks!
@maxthorax13II
@maxthorax13II 11 ай бұрын
Didn’t think I would print anything, but that car hook was something I didn’t realize I needed!
@OldCurmudgeon3DP
@OldCurmudgeon3DP Жыл бұрын
Over extruding in vase mode might help the waviness. I've had good results up to 2x the nozzle diameter as wall thickness.
@BelleDoesStuff
@BelleDoesStuff Жыл бұрын
I just wanted to say I noticed you have a PS Vita and that makes me happy
@EXG21
@EXG21 Жыл бұрын
Gotta like that I saw this right before the US Grand Prix F1 Practice 1. Ha ha. Nice treat before the meal.
@cursedvoid
@cursedvoid Жыл бұрын
I love the business card holder but i've already set up gridfinity for most of my organizational needs
@EternityForest
@EternityForest Жыл бұрын
Yeah, I put Gridfinity on almost everything other than decorative items. I don't really use baseplates though, I like making large trays that can stack, but are big enough to stand alone, and stackable filament hinge boxes
@beermanuk
@beermanuk Жыл бұрын
I always watch your videos and noticed your love for Danny Ric, you've had Red bull, Renault, McLaren and now Alpha Tauri merch. Hopefully it'll be Red Bull again next season.
@SolarpunkSeed
@SolarpunkSeed Жыл бұрын
thank you! just printed out a drain cleaner as second print (after a Benchy) on new Bambu X1C :)
@rickybobbyracing9106
@rickybobbyracing9106 11 ай бұрын
Actually useful prints! Too many videos out there with retreds of non-sense dollar store junk, but this is another one of your videos with good info!
@scottlong9361
@scottlong9361 Жыл бұрын
Those GOATs are the fourth-most-popular folk duo in Australia
@TeachingTech
@TeachingTech Жыл бұрын
I'm trying to convince my family to get a third one to manage the other two. Maybe call it Murray.
@dan-nutu
@dan-nutu Жыл бұрын
@@TeachingTech Have you considered printing a fake broom? 😄 Or just make one with leftover filament? Would they eat it?
@JacobShepherdEngineer
@JacobShepherdEngineer Жыл бұрын
I could definitely use the cable clips and trunk organizer. Might try replacing my broom holder with this one too.
@carnsoaks1
@carnsoaks1 Жыл бұрын
That broom handle holder, a thousand year Idea repurposed for today, is a simple design that will open many lay peoples eyes to the potential of threed. Finally. Perfect garage shop front sales item.
@lcalbero
@lcalbero Жыл бұрын
Congrats for another great video with many really usable items to help us daily. Cheers !
@Stocktonfilms
@Stocktonfilms Жыл бұрын
Some good ones here! On point as always. Thanks again!
@stuartc6303
@stuartc6303 5 ай бұрын
Brett and Jermaine. Love it.
@riesmmm
@riesmmm Жыл бұрын
Those velcro trunk holders are genius!
@scottyadamz
@scottyadamz Жыл бұрын
Got to love 3d printing for custom storage solutions!
@osvaldo56
@osvaldo56 Жыл бұрын
Very useful! Thanks
@steveriley9911
@steveriley9911 Жыл бұрын
Some great ideas, Thank you
@kellyjean4981
@kellyjean4981 Жыл бұрын
I’m always impressed by the simple things we can print to help organize. I need to print the drain snake and the trunk Velcro holders
@zecuse
@zecuse Жыл бұрын
3:09 While the reflection looks good, making the surface fuzzy (in Cura, fuzzy skin) would probably make it more effective. This will mimic the porous aspect of foam panels. You'll also want to print it with a couple of walls to make absorption better and stability for the fuzz.
@Sembazuru
@Sembazuru 11 ай бұрын
I've never used fuzzy skin on vase mode. What do you know. I just fired up PSv2.7.1, loaded a built-in cylinder, turned on vase mode and then fuzzy skin. It sliced w/o problem. How well does it print, I wonder.
@zecuse
@zecuse 11 ай бұрын
@@Sembazuru I haven't ever used fuzzy skin and only used vase mode once for flow tuning (from Teaching Tech's calibration video and website). I suspect a fuzzy vase will be really sketchy to print with all that shaking and no wall to support it.
@lwo7736
@lwo7736 Жыл бұрын
Those clips look great!
@petergplus6667
@petergplus6667 Жыл бұрын
Cool selection, thank you
@dan-nutu
@dan-nutu Жыл бұрын
Yes for the cable organiser, not so much though for the plughole hair extractor demo!
@kronamadness7119
@kronamadness7119 Жыл бұрын
Actually searching for usefull design that make my life easier since I have a brand new creality K1, and this video is just Perfect I love all the idea pretty ingenious! 🤩
@ZomBmusicHQ
@ZomBmusicHQ Жыл бұрын
FYI, I am 99% sure that the sound panels won't help at all regarding sound diffusion or absorption. The only thing I would find use for them are for aesthetic use. Plastic isn't a good material for any acoustic purpose. Btw I am a sound engineer so my comment is really to help you out so you don't waste filament and time with these "sound panels" 😅
@jpeero
@jpeero Жыл бұрын
I heard you could recycle with cartons as a sound proof material
@ZomBmusicHQ
@ZomBmusicHQ Жыл бұрын
​@@jpeero For sound absorption, you want the sound to travel into the material and then get trapped within it until it looses all of it's energy. So carton isn't a good material in terms of sound absorption. Solid materials only reflect the sound and although carton is somewhat porous, it's mostly solid. If you want to recycle materials, think of anything that's thick and porous, like foam. A mattress does more than any amount of carton you can think of haha. Also, thick rugs or heavy curtains help in terms of sound absorption as well. A good and cheap material for sound treatment is Rockwool, look up "DIY sound absorption panels using Rockwool" and you can see how cheap they are to make. That's my go to budget and effective suggestion.
@coreyward
@coreyward Жыл бұрын
Yeah the author of the model notes it is for "sound diffusion", but I wasn't quite sure what the perceptual impact of that would be so despite it looking cool I didn't bother printing them.
@ZomBmusicHQ
@ZomBmusicHQ Жыл бұрын
@@coreyward sound diffusion is another application within acoustic treatment, and even tho it "looks" like it was designed for that purpose, I'm here to let you all know that the little sound diffusion it would actually achieve wouldn't really matter enough for you to spend the time and money to print them. You would need to print them solid (not in vase mode like it's suggested) and even then I doubt it would do a good job at diffusing. They're pretty, but if you are looking to get any practical acoustic use out of them, you're better off making other DIY diffusers.
@coreyward
@coreyward Жыл бұрын
@@ZomBmusicHQ Appreciate the confirmation!
@Basn
@Basn Жыл бұрын
i got the broom holder already, its awsome
@PureRushXevus
@PureRushXevus Жыл бұрын
That last one seems extremely useful
@MegaAfiss
@MegaAfiss Жыл бұрын
The best is the last one!
@ElliotDelgado
@ElliotDelgado Жыл бұрын
This is awesome! thanks for the video!
@eskanderx1027
@eskanderx1027 Жыл бұрын
He's back, baby! 🤘🏼
@MrFerrariF360
@MrFerrariF360 Жыл бұрын
Reppin the DR! Love it!
@tannerpoulis3156
@tannerpoulis3156 Жыл бұрын
I would have the assume the acoustic dampeners don’t actually work, since they aren’t at all porous and just add more smooth surfaces for the sound to bounce from. Maybe because they’re thin they can kind of help but they wouldn’t really work anything like actual acoustic foam or custom made acoustic treatment that you can still make for super cheap. other than that really good designs
@3dman875
@3dman875 Жыл бұрын
I really like all of your videos thank you for making them
@jorgeacosta1198
@jorgeacosta1198 8 ай бұрын
exelente video muy explicativo y cosas muy utiles gracias por compartir exito y salud
@OddJobEntertainment
@OddJobEntertainment Жыл бұрын
I'd be highly skeptical of the hollow sound panels. They look cool, but being hollow, there's a huge range of frequencies that they really can't touch.
@IrocZIV
@IrocZIV Жыл бұрын
I think most of those panels are only good for sound reflection in the room anyway, so maybe it could do as good of a job in that regard.
@Hanzi2u
@Hanzi2u Жыл бұрын
Yes it actually just shit tbh
@Argosh
@Argosh Жыл бұрын
​@@IrocZIVyou can't exactly place those willy-nilly...
@brianparker5228
@brianparker5228 Жыл бұрын
I would say that the cable organiser where the cable wraps around then is covered is a fire risk the coil will act as a transformer winding and could melt etc
@glowpipe
@glowpipe Жыл бұрын
Don't know if it will be a risk here. Think the cable is too short and loosely coiled. But my last workplace, they used an old welding thread roll to roll the extension cord around. One day one of the workers was making waffles and didn't unwind the cables and they melted and shorted.
@DonsArtnGames
@DonsArtnGames Жыл бұрын
The organizer at 7:06 seems like a good idea, but won't the coil create an electromagnet? That could be an issue with anything magnetically sensitive and possibly vampire out some electricity to keep the EM field energized.
@kimmotoivanen
@kimmotoivanen Жыл бұрын
No, because when current flows in both directions, magnetic fields cancel each other (in very close range not completely, but in practice well enough). If you separate L and N (or + and -) and coil them in _different_ directions, that would be quite different (better not do that though 🌩) 😉
@rbid
@rbid Жыл бұрын
many thanks. have these enelope batterirs and charger😃 Greetings from the Galilee
@eSHOPFinds
@eSHOPFinds Жыл бұрын
It's not just about organization; it's about creativity and making life more enjoyable.
@Etrehumain123
@Etrehumain123 Жыл бұрын
Ahahahah perfect timing, I was about to start listing all the things I need to queue in my printer
@porterfielddynamics
@porterfielddynamics Жыл бұрын
Your goats are a reference to flight of the concords right? Amazing show.
@LutherBuilds
@LutherBuilds 11 ай бұрын
I wonder how much weight those broom handle hooks can hold. I'm thinking of shovels and rakes in rhe garage.
@garylangford6755
@garylangford6755 Жыл бұрын
great stuff!!
@gexas38
@gexas38 Жыл бұрын
the key thing and broom holders are getting spun up on the printer for sure...great tips
@tom-840
@tom-840 9 ай бұрын
Thumbs up for the AlphaTauri shirt!
@TeachingTech
@TeachingTech 9 ай бұрын
Had to get one before they changed their name and because Danny Ric was there.
@chiefgeek2020
@chiefgeek2020 Жыл бұрын
I really like the locking cable clip and think a version of that would work awesome to keep spark plug wired nice and tidy.
@bnut1576
@bnut1576 Жыл бұрын
4:40 Bro you need to spend some of those prusameter points! 😂 loved the video! I have several friends who would be interested in the business card holders so I will be printing some of those for sure!
@thorus528
@thorus528 Жыл бұрын
great stuff as usual. Im sure you have plenty of 3D printed accessories and upgrades for sim racing rigs. Could you please make a special for your fellow enthusiasts?
@cozmosland
@cozmosland Жыл бұрын
do you find the sound panels to help or is it more for decoration?
@gsheppard8707
@gsheppard8707 Жыл бұрын
This is a great video, but I do feel it's worth pointing out those acoustic panels must be printed in something non-flammable like PETG. PLA is highly flammable and flammable acoustic panels have been cited in so many fires as being a significant cause of the severity (The station nightclub fire is a significant, and very tragic, example). Usually it's flammable acoustic foam, but the same would apply here if you don't use the right material.
@davidk7747
@davidk7747 10 ай бұрын
Nice t-shirt mate!
@mattriding5588
@mattriding5588 11 ай бұрын
I sense a remix here. Combine the Trunk velcro holders with your video on 3D printed Velco.
@jasonjulian1
@jasonjulian1 Жыл бұрын
Those clothes pins would be good chip bag clips too.
@jorgeacosta1198
@jorgeacosta1198 8 ай бұрын
me encanto el porta escobas muy ingenioso
@AlyssaNguyen
@AlyssaNguyen Жыл бұрын
5:20 Aren't you a little short for a Stormtrooper?
@forestbrother7772
@forestbrother7772 Жыл бұрын
3D printed organs for your life! Hurrah! (misread title at a glance)
@kayhweeeeeee
@kayhweeeeeee 11 ай бұрын
What printer is that?! I’m a sucker for clear technology and I gotta know.
@ke_ag
@ke_ag 29 күн бұрын
You're kinda cute with your glasses on, can you make more videos wearing them? Asking for a friend.
@NicksStuff
@NicksStuff Жыл бұрын
Do you feel your life is better organized with sound panels? ;-)
@TeachingTech
@TeachingTech Жыл бұрын
Yes.
@leglessinoz
@leglessinoz 6 ай бұрын
You should not use mains power cords while coiled up. It can lead to overheating.
@TS_Mind_Swept
@TS_Mind_Swept 10 ай бұрын
11:32 I've watched so many detailing videos I was expecting a vacuum to pop out there..
@cache4pat
@cache4pat Жыл бұрын
Awesome
@nydo7547
@nydo7547 2 ай бұрын
11:44 just shake your car to check if it works. 🤣🤣🤣
@Carlos-eo3iu
@Carlos-eo3iu Жыл бұрын
The sound panels are awesome. I’ll def be making some to experiment in locations behind the tv for optimal sound.
@bradley9856
@bradley9856 Жыл бұрын
just use a curtain offset a couple cm from the wall, way better than printing a load of junk
@ZomBmusicHQ
@ZomBmusicHQ Жыл бұрын
FYI, I am 99% sure that the sound panels won't help at all regarding sound diffusion or absorption. The only thing I would recommend them for is for aesthetic use. Plastic isn't a good material for any acoustic purpose. Btw I am a sound engineer so my comment is really to help you out so you don't waste filament and time with these "sound panels" 😅
@bradley9856
@bradley9856 Жыл бұрын
@@ZomBmusicHQ just what I thought, but would a curtian of some sort suspended from the wall that sits a couple cm away from said wall help at all?
@ZomBmusicHQ
@ZomBmusicHQ Жыл бұрын
@@bradley9856 For sound absorption, you want the sound to travel into the material and then get trapped within it until it looses all of it's energy. So yeah, curtains work better than not having anything at all. The heavier the curtain, the better it will perform. Solid materials only reflect the sound, so the curtain has to be made out of porous material (as in, more fabric, less plastic) A good and cheap material for sound treatment is Rockwool, look up "DIY sound absorption panels using Rockwool" and you can see how cheap they are to make. That's my go to budget and effective suggestion.
@bajcsyzoltan74
@bajcsyzoltan74 Жыл бұрын
7:31 looks little dangerous if the cable get hotter..Not too good idea spool the cables i think..
@antok86
@antok86 Жыл бұрын
What did you use to mount the panels
@juunnl9905
@juunnl9905 Жыл бұрын
Casually having 6k prusameters in his account lol
@dan-nutu
@dan-nutu Жыл бұрын
Timestamp?
@juunnl9905
@juunnl9905 Жыл бұрын
@@dan-nutu0:54
@funkysod
@funkysod Жыл бұрын
But no links to the other videos in the description?
@TeachingTech
@TeachingTech Жыл бұрын
The links have been there the whole time.
@aL3891_
@aL3891_ Жыл бұрын
Having kids means i always need clothes pins, definitely checking that one out
@williampruitt549
@williampruitt549 Жыл бұрын
Are the goats named Bret and Jemaine like from Flight of the Conchords? lmaooo
@TeachingTech
@TeachingTech Жыл бұрын
Correct :)
@rossmarzano
@rossmarzano Жыл бұрын
Great video as always. What's the best platform to share files on? I tried thingiverse a while ago with no success, I want to share some designs like a bag hook with print in place chain amongst other things
@Boodster61
@Boodster61 Жыл бұрын
I can't wait to get my first printer! Need to find another job before I can buy one 😢
@dan-nutu
@dan-nutu Жыл бұрын
Just be careful that it will become the gift that keeps on "giving"... errr, taking. It's not just the initial cost for the printer itself, you'll also need rolls of filament in different materials (and possibly also colours) at around $20-25 a piece, filament drier, many upgrades (if you're buying a cheaper printer to begin with), maybe also carbon filters, an SBC for Octoprint or Klipper, maybe also a web cam for it, etc etc etc.
@wilkuuu4016
@wilkuuu4016 Жыл бұрын
3 minute - It's not a sound absorbiing panel, its only diffusion panel and because of thin walls works really poorly. But looks cool.
@therealduckvr
@therealduckvr 8 ай бұрын
what app r u using to print
@terencerenshaw91
@terencerenshaw91 Жыл бұрын
Should have put a USB thumbdrive/SD/Micro SD organizer. They help out!
@dan-nutu
@dan-nutu Жыл бұрын
Have you found any good microsd organiser? I'd love one that packs ar least 15-20 cards, allows for some form of label/id for each card, and it is small enough to throw in your laptop bag
@CDRaff
@CDRaff Жыл бұрын
I honestly think the loose corners look better on the tensegrity card holder. When you first see the illusion it's easy to think that the strings are "fake" in some way; like they are stiff. With them loose it makes it fairly obvious that there isn't fakery involved.
@RFSdan
@RFSdan 5 ай бұрын
Go Yiki Tsunoda!!!!
@kiplinght
@kiplinght Жыл бұрын
Missed opportunity to "test" those Velcro corners around a track day
@rlimagon
@rlimagon 6 ай бұрын
Since you are obviously a F1 fan (like myself) why not make a video about cool F1 themed 3d prints? Cheers from São Paulo!
@barzint
@barzint Жыл бұрын
What’s the vase mode?
@TeachingTech
@TeachingTech Жыл бұрын
This will help: kzbin.info/www/bejne/mqW4aoFjZ7Kco9k
@Ac.MillitaryPrepper
@Ac.MillitaryPrepper Жыл бұрын
You should tell yourself and friends to make a parabolic plastic bowl shape device for painting with zink for wifi band dish reflection and maybe make a mesh dish backing with like speaker wire and copper wire so you can make your own wifi reciever sender for a laptop wlan card adapter for high priority use at like 760 characters per second for long distance simple internet use
@WeekdayWeekend
@WeekdayWeekend Жыл бұрын
These could all organize my house but I'm not sure about my life. I don't think any of these prints cure crippling depression or loneliness.
@ninmarioscc
@ninmarioscc Жыл бұрын
You look like Alpines Ocon 😊
@Doile911
@Doile911 6 ай бұрын
7:18 Remember! Do NOT, i repeat DO NOT put any iron/steel to the middle of the cable spool. You WILL create an electromagnet.
@monkeydadonkey6496
@monkeydadonkey6496 Жыл бұрын
Nice Shirt Bro😅
@crowguy506
@crowguy506 Жыл бұрын
Obviously that velcro part should have printed velcro as part of the design.
12 more 3D printed tools you need for your workshop
15:38
Teaching Tech
Рет қаралды 1 МЛН
The best 3D prints to organise your life
13:53
Teaching Tech
Рет қаралды 425 М.
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 96 МЛН
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН
I Hand-Picked the BEST 3D Prints
21:26
The Next Layer
Рет қаралды 384 М.
Jankiest 3D printing tips that actually work
16:20
Teaching Tech
Рет қаралды 128 М.
PET Bottle Recycling: Waste to 3D Printing Filament
17:37
CNC Kitchen
Рет қаралды 1 МЛН
I 3D Printed a $1,500 Chair
23:09
Morley Kert
Рет қаралды 634 М.
10 Free 3D Prints to BLOW YOUR MIND!
26:17
Zack Freedman
Рет қаралды 1,2 МЛН
12 3D printed tools you need for your workshop
16:59
Teaching Tech
Рет қаралды 1,8 МЛН
15 Useful 3D Prints: Go From Beginner to Advanced!
18:52
The Next Layer
Рет қаралды 572 М.
I Tried Starting a Sidewalk 3D Printing Business
17:47
Morley Kert
Рет қаралды 766 М.