Team Tech Tip Spektrum DX6 flight modes for sailplane

How to set up a full house sailplane using the flight mode capability of the Spektrum DX6 new generation radio.

[@michaelwhinnery164]

OMG I've been looking for this video for 4 years.... Thankyou

[@erichoenderop1142]

Despite the fact that we are almost 7 years later, I am happy with this explanation! I use an NX10 and have now managed to do it with a (motorized) glider :-)

[@district51_rc]

What does it say about Spektrum technology that 8 years after this video was published (2015) , it is STILL relevant and useable when programming a current NX10 radio. Very thankful for this video because I think I'm maybe 1 out of 8 people on the planet using Spektrum for DLGs. I should have kept my X20s and ETHOS for my DLG.

[@StrangerInAStrange]

Thanks Mike! I've been flying motorized gliders on my DX7 in 'Acro' mode so I could have a 'Flaps' setting. 🤦‍♂ Obviously not using the radios potential. This was a very clear, easy to follow example with good camera work on the screen. Now, I just have to set up Flaperons.

[@calanmoss]

I had a lot of trouble getting the throttle to work . Thanks to your video I now know that the throttle is assigned to aux 2 . Very counter intuitive , but it works . Cheers from Australia.

[@edgaravalencial.5728]

Very nice and very helpful Mike. Do you have any videos on how to program GLG with just to servos per wing. How can I made to program de flaps on to throttle channel.? Thank you. Allan.

[@stumatt]

how do you get the throttle stick to work the flaps?

[@dksurfer]

Great video Mike. I bought a DX6 and will be getting it soon. I will program it for a glider. One thing I did not see in the video/explanation is which button of the Tx control which flight mode. Is that part of the manual? or is there another video that shows that. Thanks!

[@philippeneuhaus5694]

Perfekt

[@jamesturncliff5960]

Please do a video for an IX 12 With an 8-channel receiver. Full House glider setup with all the bells and whistles thank you I can't find anywhere

[@liellthomas2894]

Mike, I have the NX 6. how do I do this with a motorised Glider?

[@inZaneSK]

Hi Mike. What would be sweet is if you could show how to setup the Horizon Hobby Delta Ray with SAFE up on the DX6. I would be greatly appreciated.

[@CONFUCIUS-f2x]

Nice video. Now , time to crash the Epsilon. Wohoooooo!!!!

[@christen49]

How do I mix crow on DX6 Radian Pro Motor glider? I'm looking to have motor on throttle stick but seam to lose that

[@testbookenglish6168]

Thanks Mike, that was interesting.

[@ChilProductions]

How do I do this same thing but with a motor?

[@pedrorivera8102]

How to program my blade SR 200 to my DX 6 new transmitter it is not like the dx6i that one is much easier to program having problem with this new radio transmitter I went online but they do not show you how to do it need to know step by step this radio is different

[@13Voodoobilly69]

I second Nicks question below. Can you have the full house setup and motor control on a DX6 or do I need to move up to a DX7 for that capability?

[@nick601sjc]

How to do the same but with a motor? Thanks

[@tonys4250]

+nick stjohn Switch the sailplane type to 2 aileron servo and 1 flap servo then you can program the motor.

[@shckltnebay]

Would the servos face the same way or be reversed?

[@alexyt4434]

I don't have Camber Preset