Team Wendy Epic Combat Helmet Liner System

[@rustyshackleford17]

Seems like this liner system defeats the purpose of the airframes ventalation system

[@JohnDoe-gj4dv]

Sir.....you are doing just fine......... It was great to see the way you had everything set up..........!!!!!!!!!

[@jfraz6246]

I enjoy the Epic pads in my Gunfighter, I really wish the Marine Corps would allow us to wear Ops Core or Crye's Air Frame helmet. As it is now i have to fly under the radar with my MICH Gunfighter, normally i just play the "im a Jtac Card" do you know any place that makes a AOR1 cover for the airframe yet?

[@DarkJester117]

UR-Tactical makes an AOR1 cover

[@sebster3004]

Crye makes an AOR1 cover but they're rare and go for like 150 on eBay

[@GuamGuy]

Doesn't the EPIC defeat the purpose of the two piece venting design? I might get an EPIC Air for my MSA MICH, but Zaps fit me pretty well.

[@mentalmetal1]

where did you get the airframe cover? it's really cool.

[@ExtraordinaireThe]

www.cryeprecision.com

[@GHOST-zy3ji]

How thin are they ?

[@lucasevergreen8549]

ik this is an old video but how did u get ur comtacs to sit so close to the helmet I have an airframe with crye rails and real 3mm adapters, is it the headset??

[@julian23561]

Pretty sure you can adjust them up or down on the rail adapters.

[@lucasevergreen8549]

@@julian23561 adjust them how? the position on the arc rails does not effect the gap between the headset and the rail

[@julian23561]

@@lucasevergreen8549 what rail adapters do you use? Because the plastic sleeves where the comtacs clamp onto can be slid up or down to sit high or low on your helmet.

[@lucasevergreen8549]

@@julian23561 crye arc rails but ztac headsets

[@herpderp1662]

I know you can use the pads in any helmet. But I wonder if I could use a TW suspension system would work with non TW helmets?

[@ExtraordinaireThe]

Pretty sure you can use the Team Wendy Cam Fit in other helmets, if that's what you're referring to.

[@herpderp1662]

@@ExtraordinaireThe the suspension system. Meaning the straps inside that hold it to your head, tighten it, and strap around your chin.

[@ExtraordinaireThe]

@@herpderp1662 Yeah, the Team Wendy Cam Fit is a suspension system.

[@Predator757airsoft]

do plan on keeping the tmc h-nape or getting something better?

[@ExtraordinaireThe]

Uh....the H-Nape here isn't TMC. It's Ops-Core.

[@Predator757airsoft]

oh ok my bad this was the first video i watched on your helmet so i wasn't sure my bad

[@DocRoe101abat]

+Extraordinaire Crye precision

[@MajorSigma]

Can u share the links to buy from please

[@hobo12345jack]

Team Wendy's epic air pad are extremely nice in an airframe

[@hAnk151289]

Where did you get that Cam cover or from what did you made it. Thx anyway, great vid Best greetings from germany!

[@urbanhooligan3787]

my ballistic bump helmet has pads, straps and one of those knobs you can crank in the back of the neck to adjust. Without that knob and hardware to support my helmet, I would be very uncomfortable.

[@rolethedice4799]

What size is your airframe helmet? Small, Medium or Large

[@Kyle_Yamamoto]

This is pretty rad

[@Coogleys]

Whats your opinion on the Semapo Gear combat shirts and pants? I have heard that they are the best replicas next to TS. I know you don't have them, just wondering if you have heard anything good about them. No one locally to me has even heard of them :P

[@Coogleys]

***** Oh yeah, totally... Atm I have AOR1 pants from TS, and I was wondering if the Semapos are on par. If I ever do (which at some point I will) get Multicam, it will be Crye.

[@AuldeyST]

Hey, I want to ask, what size fits TMC Airframe Helmet? Does the Size S Team Wendy Epic Pad fits the TMC too?

[@ExtraordinaireThe]

This is a TMC AirFrame...

[@AuldeyST]

What size is your Airframe cover? S?

[@wkopko5527]

Are lenses on Contour cameras shatter/ BB proof?

[@mkresowski]

Where did you purchase it? Know of any deals?

[@TheDogPebbles]

really cool gear! and cant wait for give away

[@Cle_M3]

Does this absorb sweat?

[@Leviathan-cq6ct]

How much does a new H-Nape go for?

[@ExtraordinaireThe]

Around $60.

[@CahlosHTX]

What are the pads you already had in your helmet called? i need something cheap for my helmet.

[@Leviathan-cq6ct]

Thanks

[@billybrown1359]

Do you like the airframe or fast helmet better?

[@BrainEatPenguin]

NJ airsofter mich 2000.

[@fidgetdogairsoft5122]

My fast helmet always falls off because I have a small head. Will this make your head secure in the helmet or is it just for comfort?

[@ianowens8547]

If you're Helmet falls off, it's not a helmet pad issue. Your chin strap needs to either be buckled or you need to make adjustments to your chin strap for a secure fit. What type of chin straps are you using? The old issued cloth type chin straps will degrade after a few uses, especially when wet and will sag. You'll want to use the Improved H-nape retention system chin strap.

[@liamdye0941]

How much

[@WALKIN6TARG3T]

Is that a replica helmet?

[@KubaTT1]

Hi! Please can you help me with sizing of helmet? Due to fact it's TMC AF sizing S - How big your head is? Cuz' i'm wondering if my 56-57cm will fit in there (cca 22,5inch) otherwise i have to buy real AF- fuc*ng expensive only for mil-sim activities- or repro in size L. Thanks!!

[@vladaOSOD]

I have TMC M size and I fit in just about OK, and my head is 60cm

[@IonutzStefan]

what helmet is that?

[@alexanderbendeliani5132]

Stefan Anghelache Crye AirFrame if it's original if not it's just an AirFrame style

[@aquila3958]

New videos soon please?

[@FiTaLipzFPS]

I just got one of this airframe can somebody help me with liner i dunno which one to buy are all of the teamwendy pad & retention system compatible with airframe ? #sorryformybadenglish

[@B1ackDaddy21]

Do these fit the FMA maritime helmets?

[@stevendepauw3742]

Very informative, I thank you.

[@sheltonpoteat6241]

Let me guess, you’re NOT in the military are you?

[@ExtraordinaireThe]

Correct.

[@ianowens8547]

​@Extraordinaire great video. You do a better job assembling your helmet then most soldiers in the military.

[@luciantruscott8528]

Does anyone know what size helmet the Emerson is?

[@DarkJester117]

Link please

[@ExtraordinaireThe]

bit.ly/1fvbfVr

[@skoshi_tempest]

Ive decided I'm just gonna buy an M1 helmet. It's all metal, and it's from World War Two so it's like $50. But the helmet cover I got is $26. It's better than spending a lot of money on a helmet that's almost as good as the M1. There is no point in spending a bunch of money on a helmet unless your planning to go to war. Or you want to be like a special force operator for airsoft.

[@ryant7394]

All metal, no pads, and looks ugly with any modern gear.

[@fatdan172501]

Ryker Thompson for 90 bucks you can get an ach.

[@donoghue666]

88mm JagdTiger m1 would look very odd with modern gear. while getting a very loud "ting" when u get shot is hand for kill might get a bit irritating. and not as comfy

[@justinm1319]

I smell airsoft

[@ExtraordinaireThe]

Good nose.

[@justinm1319]

@@ExtraordinaireThe 😁

[@Mylightswillinspireu]

1, 16, 2, 1

[@herpderp1662]

Looks like that box kicked your ass. Seems to me your another "$10000 in gear cool guy killed by .30 cent bullet in first wave" types. Good luck.

[@taylorbennion3706]

When did the box kick his ass?

[@jingq2]

How did you become such a badass, please teach me bro

[@hAnk151289]

Where did you get that Cam cover or from what did you made it. Thx anyway, great vid Best greetings from germany!

[@ExtraordinaireThe]

I made it from several pieces of McNett CamoForm in Multicam.

[@hAnk151289]

@@ExtraordinaireThe thx

[@WALKIN6TARG3T]

Is that a replica helmet?

[@ExtraordinaireThe]

Yeah, it's a TMC Airframe.

[@WALKIN6TARG3T]

Wow nice due I like it. I Have The same helmet :)

[@hAnk151289]

Where did you get that Cam cover or from what did you made it. Thx anyway, great vid Best greetings from germany!

[@christopherordonez2301]

Amazon