never saw such a awesome work for light installaton.
@SluSharkND2 жыл бұрын
That is a great upgrade! The attention to detail is outstanding. It looks like it came from the factory like that in the engine compartment. Well done!
@KJOff-Road2 жыл бұрын
Thanks a lot. thats much appreciated. And thanks for watching!
@clooperman37452 жыл бұрын
@@KJOff-Road There is a saying, "effort equals reward", you certainly put a lot of effort into the project and the end result, well there is the reward, first class.
@louisbabyCT2 жыл бұрын
I second that comment, your attention to detail, and the explanation of what you are doing, makes your videos great. Your Jimny looks fantastic man, great job...
@KJOff-Road2 жыл бұрын
Thanks a lot, That is much appreciated. And thanks for watching!
@SalvoDan2 жыл бұрын
In Australia, UHF radio has several Citizens Bands for hobbyist and Enthusiasts to legally use upto 5W. My first mod on my Jimny was a UHF radio. My second was a single roof crossbar to mount the antenna on. My third was a light bar, wired similar to your spotlights, with one auxiliary circuit for future work lights. I have a hidden Winch mount on order and will install a winch inside the front bumper next.
@zimbok Жыл бұрын
I'm in awe of your work. Absolutely brilliant!
@showmemo36862 жыл бұрын
That's a much cleaner install than what I just saw on a recent episode of 'Just Rolled In'. I think a winch would at least look cool.
@michaelpena6285 Жыл бұрын
Outstanding installation and wiring!
@OsirisnIsis Жыл бұрын
Perfect job, looks great!
@jonatanechenique72712 жыл бұрын
Very nice setup and function. Great work!!!!
@KJOff-Road2 жыл бұрын
Thanks a lot! And thanks for watching!
@iamrichrocker2 жыл бұрын
Suski should hire you/consult with you for after market and or pre production planning..you have tranformed this vehicle into viable alternative..great stuff..
@KJOff-Road2 жыл бұрын
Thanks a lot for that compliment! And thanks for watching!
@henryortega92032 жыл бұрын
Excellent!
@noelprolongeau7681 Жыл бұрын
Nice work mate
@alonverner22174 ай бұрын
Found this video just now. Great work i dont think professionals will do such a project without charging you an arm and a leg. Will you be willing to publish the fuse box design files? wish yo u were doing more Jimny videos.
@KJOff-Road4 ай бұрын
Thanks a lot! And yeah, the files are already free for download. The link is in the video description :)
@allenzhang5501 Жыл бұрын
good job you did!
@LogitechXibanga2 жыл бұрын
My favorite youtuber is back :'D
@clydebalcom36792 жыл бұрын
Looks great. Works great. The install looks factory under the hood. As for mods? A winch and recovery system is a good investment.
@KJOff-Road2 жыл бұрын
Thanks a lot! it would actually be really cool to have a winch on this. Thanks for watching!
@erik_dk8422 жыл бұрын
It would be super cool if you printed a new relay box lid with information on the inside about the relays and fuses, just like it would be if factory installed.
@KJOff-Road2 жыл бұрын
That would be cool. and i might do that at some point. :) I actually tried doing it with just some lable-stickers. but the 3d-printed surface wasnt smooth enough for them to stick. Thanks again!
@BorisEkner2 жыл бұрын
Please add rock/side lights on the roof rack as it would complete your impressive light installation.
@markopetrovic34912 жыл бұрын
Lift kit for Samurai and BF goodrich💪🏻💪🏻💪🏻
@KJOff-Road2 жыл бұрын
That would actually look really good! Thanks for watching!
@ROB4X4NISSANGR Жыл бұрын
Nice job mate🤙
@apollitt52 жыл бұрын
Front and rear tow hitch, removable so you can replace with a winch front and back
@KJOff-Road2 жыл бұрын
That would actually be very handy! and it would be nice to have some kind of winch set-up on this. Thanks for watching!
@td4dotnet2 жыл бұрын
Great video TAT! I've been wondering how to run the wires into my Jimny and I didn't know about the windscreen trick that's nice and neat I like it. On my previous vehicles I ran the wiring down with the snorkel but I don't have one installed on the Jimny and I'm not sure if these days I would be just adding it purely for aesthetic value. Also I confirm that wires through the back door (although tempting) only ever lead to them being crushed into a mess. I'd be interested to hear how your 3D printed relay box is holding up... personally I'd have printed that solid :-) I'd love to see a video on a CB / UHF install and how you go about that - I commend your neatness in the wiring I love making neat wiring harnesses I don't know why people hate the job so much! All the best.
@KJOff-Road2 жыл бұрын
Thanks a lot! it would have been convenient, if i had a snorkel to run the wires along. but yeah, so far, they are sitting nicely along the windshield :) i was also curious about the 3d-prints durability. Now it's been a little over half a year, and so far, it seems to be holding up just fine. And yeah, i agree, it's just more satisfying when the wires are all sorted :) Thanks for your interest, and thanks for watching!
@shumailkhalid51722 жыл бұрын
good
@maragtaz36532 ай бұрын
Sir may I ask for help...I have no knowledge regarding auto electrical. I'm so glad for found your video...i don't know how to do it...I want put additional light on my car...thnks very much for the video
@rustyrovers79242 ай бұрын
Great work, what colour is the full beam trigger wire from factory loom as looking to wire spot lights to my vehicle and what colour trigger wire is for the side lights. My spots have full beam and marker lights so need to work out what’s what. Can you also confirm if the trigger wires are positive or negative triggered. Thanks
@LogitechXibanga2 жыл бұрын
Put a bull bar just to make it look cool XD
@KJOff-Road2 жыл бұрын
I just might ;) Thanks for watching!
@carstenvernerpetersen91842 жыл бұрын
totalt cool lavet, kommer du til Suzuki 4x4 træf i maj 6-7-8/5 i Hederager offroad ? gad godt se alle dine projekter på Jimnyen IRL.
@KJOff-Road2 жыл бұрын
Mange tak! Og ja, Jeg håber på at jeg kan nå at komme med, denne gang :)
@IIGrayfoxIIАй бұрын
Not a fan of Weaterpak connectors, I prefer to use Deutsche connectors
@erik_dk8422 жыл бұрын
Du har købt det halve af Biltema LOL. Er deres vandtætte stik ok kvalitet? 3D-print er perfekt til dette formål. Stor respekt til dig.
@KJOff-Road2 жыл бұрын
Haha, ja, nogle af tingene var nemmest lige at hente der ude :) Men faktisk så var lige netop de stik der ikke så imponerende. de skal sikkert nok holde. men de er lavet i så hård plastik, at der skulle alt for meget tryk til, for at få stik-benene i. (Måtte bruge tænger og skruetrækkere) Men resten af "Forbrugs varene" der ude fra, virkede ok. (Har dog heller ikke brugt deres ledninger, da de er for ringe) Men tak for kommentaren, og tak for kikket!
@timbrake34042 жыл бұрын
Great job, what software did you use to design the relay box? It looks amazing.
@KJOff-Road2 жыл бұрын
Thanks a lot. I just made this one in "Tinkercad" - A free online based modeling tool. i find it nice, quick and easy to use, for simple projects like this. Thanks for watching!
@clooperman37452 жыл бұрын
@@KJOff-Road Instead of cutting the bolts down couldn't have used washers under the bolt head to reduce the thread length?
@motosilver9489 Жыл бұрын
Can you share the 3D printed box specs?
@KJOff-Road Жыл бұрын
The 3D file is up on Thingiverse :) Theres a link in the video description.
@thefitdadjourneyАй бұрын
Hello! May i ask you how you did it with the wiring for the lightbar so that you can switch between bright light and dim light? Thanks in advance! :)
@KJOff-RoadАй бұрын
It's fairly simple really. There are two seperate wires on the lights themselves. (one for the dim maker lights and one for the bright light) I just wired the dim lights, to come on with the normal headlights. and i wired the bright lights on be turned on with the separate button. Thanks for watching along :)
@MrBaffen2 жыл бұрын
put in a gun rack :D
@andresaranda5495 Жыл бұрын
what is the name of the brand o the lights?
@KJOff-Road Жыл бұрын
They are from somthing called "TT Technology" A Polish brand, i think. (As the instructions were in Polish) I think it's just re-branded Chineese stuff, though. Thanks for watching!