500+WHP TURBODIESEL Swapped 240Z is ROWDY and Roadworthy!

For your chance to win a 2021 Ford® Mustang Mach-E GT Performance
- all while supporting a great cause - enter at www.omaze.com/...
Datsun 240z turbo diesel finally drives back home. Also, we make some bomb tacos...
Team Boosted Merch is available now!
Team Boosted Link: teamboosted.com/
Support our builds by checking out our awesome driving shades!
Boosted Shades Link: bit.ly/3zSPn8s
USE CODE: "teamboosted" FOR 20% OFF
Facebook.com/boostedshades
boostedshades
Music:
soundcloud.com/freemusicforvlogs

[@TeamBoosted]

For your chance to win a 2021 Ford Mustang Mach-E GT Performance - all while supporting a great cause - enter at www.omaze.com/TBMustang

[@Sloppyjalopy123]

I missed Devin saying that, glad the cooking segments are back! Whatever you guys whip up is "fire as always ".

[@thejohnnybob]

As a former A-10 crew chief with the Flying Tigers, I always approve of classic cars with the shark teeth on them.

[@davidblanck4131]

One of the things I love about this channel, is how raw it is. I know it sucks to have to sensor your content. But, I think it will help the algorithm. I'm definitely cool with that. I still think this is one of the most underrated channels on KZbin. Also, god damn do I miss living in SoCal, where mexican meat markets have all the perfectly marinated Carne Asada. So good.

[@trentkearney]

Fire...as always! Great work fellas! Great to see some cooking back. Ribs and wings next time

[@komischertyp4]

If it pushes pressure into the engine, maybe it’s welded in the wrong way around? It should be facing with the direction of flow

[@NotJo4Ever13]

It looked right when he did it in the prev video... Is it possible that there is just too much backpressure from the exhuast?

[@komischertyp4]

@@NotJo4Ever13 looked at the video again, seems to be wrong way around but don’t quote me on it

[@woopimagpie]

Could it be that these fittings are mostly designed for petrol engines? I imagine a diesel generates a ton more pressure, possibly more than that fitting was designed to handle? We didn't really get a good look at the installation, like others are saying, it might be the wrong way around? Also, running crankcase pressure into the exhaust isn't very environmental - yeah yeah I know, but surely you'd make an attempt to reduce emissions where you could right? I suspect a return to a catch-can scenario might be the better solution, for a few reasons.

[@zooky514]

Glad she's alive again! We used to make meatballs, chicken parm/ alfredo, ravioli, and tortellini on our toolboxes back in the day. Some Italian food would be sweet!

[@NotJo4Ever13]

Boys... that food... I want it. What the hell is this magic video masterpiece you have created!!!??? Filled with fun, and REAL talk, and engineering, and science, and fun and cars and boost and FOOD. This is straight up ART. I'm gonna stick this on loop honestly.

[@jimmyd7071]

You need a one way crankcase check valve Very common on dirt track cars

[@jimmyd7071]

Try a 1970 350 anti backfire crankcase valve

[@briansmedley7392]

Missed the cooking segments, glad they are back

[@mrkthmn]

At 3:52 OG fam catches the reference. I laughed out loud at the Cadillac part though. "It's, haha, an *old Cadillac but yes." You have no idea how happy it made me to be back in the house for some cooking though. It not that I particularly care about the food as much as it just takes me back to better times and I appreciate that break. I'm sure that when I die the angel that comes to get me is going to reach down his hand and as I reach back I'll ask him, "is it fire?" and he'll smile back and say, "As always." Then I'll float off to burnouts with Torreto and the rest of the family in the sky.

[@cadbane6462]

Dont kill it this time

[@dukekemppy5409]

Glad the old girl is back. Looks damn good, and I am wondering how many heads turn when they hear the truck taking off where the Fairlady was.

[@DougTheSnowMan]

That cooking segment was awesome. I started watching after you guys stopped, keep it up!

[@noahmckinney2455]

I just finished dinner and I’m hungry again now. Thanks

[@Garaculas]

Glad to see the Z back but what we really wanna see is you guys cooking up some RIBS!

[@Sniper269]

Good to see the Z back on the road. Flank Steak marinated in French dressing, grilled medium, basted during grilling with more French dressing and cut thin slices at an angle.

[@harrygallagher2083]

The cooking segment is 👌

[@ebenpost3255]

My dream car was a 240z om606 swapped. Then I saw your videos and realized you guys hav actually made one 😂. Sick

[@fryreartechnology7611]

Love the shark teeth idea. Do it!!

[@michaeldietsch7476]

It is good to see the 240 back on the road.

[@beastfte2129]

Y’all should make some beef jerky next. (I know it’s not grilling but I like making beef jerky)

[@mandip1188]

Motto of the build - "We're gonna need a better solution in future, but this should get it outta here" 😂

[@philiphill9400]

Nice to see the 240 up and running again guys. How about some Thai red curry next ??

[@SomeOne-mx2ro]

Happy to see z roll out of the garage.

[@Peterpetty1]

Been ages since the last food montage !!!

[@bennanoman]

Have you guys ever thought about taking this car to Hoonigan to be on daily transmission? I’d love to see it and it wouldn’t be too far of a drive at all

[@nekomatajs]

Cook up another Rotary powered Porsche!!!

[@andrewpearson8522]

Firstly, just some bomb steaks, but secondly cook bacon on an exhaust pipe.

[@raving_1074]

Cooking segment! Second best thing after the one rotor!

[@dankennerson2080]

Nice to see the datsun back together. Get that shimmy settled and send it!

[@mitchelllucier6930]

Happy it’s back! Do some voodoo stuff. I’ve always wanted to see someone try to make their own ITB set up if not atleast multiple throttle bodies would be equivalent or more impressive than a custom header.

[@sabiti5428]

ITBs make zero sense on a diesel tho

[@matthewwedrychowski1512]

glad to see this beauty back on the road

[@angusmf]

Kinda funny when you started it up and then you hear what sound like parts or tools clattering to the ground. Probably not what happened here, but how many of us have started up something for the first time or gone on a shake down, heard that sound, then started checking the ground/mirrors?

[@joshlane6560]

I do believe that if you ran a pipe from the hood intake to the turbo with a bit of mesh or even a pipe running directly to the air filter, it would finish the look off😁 the street tacos looked amazing too, keep doing the food part, brilliant😍😍

[@ptyatas4380]

Love this build definitely one of my favorites

[@MJPilote]

Weld the extractor pipe correct way around and put a back pressure valve on it. It should go directly to the flow direction to pull negative pressure. Putting a smaller filter will hurt performance. Test it in the dyno if you don't believe me.

[@evoTimer]

“It’s fire, as always” shirt/ banner/ sticker should be a thing. Devon’s avatar with his famous phrase.

[@thiagolopes7892]

aside of the tortilha and short of some Tiao Carrero song in the back ground, thats a standard brasilian weekend

[@sc-no8lq]

Carne asada, boost run, oil everywhere… you guys as back!!!!! It’s fire, as always! Hope you all have a great Thanksgiving

[@braiansingh9730]

Hell yeah brother!!!!! Good to see the datsun back on the road rippin' it!!!

[@benjamindavidson632]

Now I'm hungry and not enough time.... thanks guys hahaha

[@NotJo4Ever13]

Why are you not at HUNDREDS of thousands of subs? Your channel content is AWESOME. and I just noticed... you guys are in the same building as the Throtl channel?! Have you done collabs?

[@denisohbrien]

when doing brake lines, wedge teh brake pedal down. it wont leak on you. pro tip.

[@BenjySparky]

Team Boosted y'all rock! Love the channel and content! I'm here for the algorithm! Peace

[@brianneal9204]

Really happy to see the Z back together and looking good.

[@Wotsit7781]

Glad to see the car back on the road. The wheels look great.

[@Thewatson77]

Hell yeah man! Glad to see her back on the road! Dude….those tacos tho 👌🏼

[@kcweiberg3731]

Turbo whistle😱 sounds amazing

[@mortenthygesen1720]

Cooking segment 👍👍👍👍

[@martinlouw2456]

Just a few small tweaks left to sort out but she's looking great, great job guys

[@jdouglas4564]

Something I noticed on my OM606 engine. The vacuum pump discharges inside the engine! at high rpm it will pressurize the crank case. I disconnected mine.

[@Adam-vc1xl]

I really missed the cooking segment really want to see some ribs

[@vladkruglov7719]

Hope one day you get back to 1rotor project and combine rx7 and rx8 housings/stators and see what gains that gives on dyno

[@g__wizz]

Run a blow by tube and anti rust the bottom of zie car. Orrr build a scavenger deal that uses intake(pre turbo) suction and a drain to your oil pan.

[@Baiello238]

The best build on yt

[@andrewclark4116]

nice little santoku you got there bud

[@jessy6464]

So hyped that the food is back!👍👍😁😁😁

[@1cdelay]

Just had dinner and I'm hungry again

[@roboman2444]

The venturi might not be working because it is on the backside of a curve.

[@byrond8592]

Looked good. Montreal smoked meat next?

[@802Garage]

Now that's a proper amount of cilantro!

[@mitchseal7709]

I had to go acquire street tacos after watching this

[@slevente00]

Damn, i've come to see 606 pulls and now im hungry

[@povlrueger3898]

Look forward to the next video!

[@Adrianzx]

Those exhausting venturis almost never extract enough air, especially with a turbo.

[@LonTierney]

Love the PSA: If you use T3 parts and then hit a boulder, you may damage your car. :-P

[@blackstorm86]

You installed the venturi wrong. I saw it in the install video but thought you guys would catch the mistake. it needs to be turned 180 degrees.

[@thunder6046]

Guys what happened to the 1 rotor? we are 1 year without any updates.

[@dordanteddy2597]

Love how the build is going. Dude! Do something with venison!

[@TestTest-eb8jr]

Could it be that the crankcase evacuation "thingy" in the exhaust was installed facing the wrong way?

[@TheFatmer]

It’s fire, as always Awesome guys

[@TheMiNdPT]

Better than this Datsun is this meat, looks delicious 😋 Anxious to see this Dyno! Big hug guys!

[@chickenfoot8803]

I will say you gotta do some homemade tortillas next time.

[@carlmartin3749]

Are you still planning on doing the c4 front suspension swap? And do you have a new passenger side mirror?

[@nath2389]

Hanging for dyno vids

[@danielhughes9556]

I'm a big fan of Z's. I'm not a big fan of wide body's, or big wheels. Im also not a fan of diesel. But damn does this car not only look good, but it's a raped ape! Very well done. Best z on the web.

[@8nos8]

Love the hood intake!

[@shagirani5518]

I want to see that on a dyno..

[@michaelblacktree]

It's nice to see the Z-car back on the road. 👍

[@venumus1]

So you guys gonna bring the Datsun up to Thursday night cruise in Ramona in the summer

[@maximilianboost8498]

Just seen this. The EGP (exhaust gas pressure) will easily exceed the boost pressure in this set up - I would not be suprised if it’s about 4bar where your scavenge set up is located. Keep up the good work 👍

[@joelkuhr5095]

Grate car content Keep it coming and your Channel will blow up 💣 🔥

[@73Bugman]

Tacos 🌮 are God's perfect food!

[@mariospantouvanos4645]

What happened to the c203 sport coupe that was supposed to get a vr6 swap?

[@alexjackson9378]

Hell yeah boys love the cooking

[@carlosevfaj]

This is a true this vs that type car.

[@AlanDavid1955]

HOW ABOUT HOT DOGS DEEP FRIED WITH CHOPPED ONIONS AND CELERY , MUSTARD WITH CHILLY SAUCE ! WHAT ABOUT DOING A SMALL SPORT CAR AND PUTTING IN A MOTORCYCLE SPORT BIKE ENGINE ?

[@stuartkarshagen6274]

The Z is awesome, so glad it's running again. Just those wheels man 😳, I vote 5 spoke, bring back the 5 spoke. Oh and straighten the steering wheel, probably why you crashed in the first place 🤣🤣🤙🏻

[@dankeen6199]

I LOVE the new shoes !

[@matthewmooch7210]

Y all need to cook a nice big ol steak, with 2 or 3 sides, or just the steak, yalls show do what you want lmao

[@markusftw5138]

The food! Mmmh, want that.

[@Jmcqueary03]

I'd like to see yall cook a burger and fries

[@rdturboit4948]

Looks tasty the taco 🌮... 🤤🤤🤤🤤🤤

[@p1kkup01ka5]

nice video, love from the north

[@ftovr2957]

Gotta say I don't mind the off-colour fender either... Maybe trying to justify not immediately painting both fenders on the car I crashed either 😅

[@twistedsmoke8800]

awesome car not sure if i missed it in one of the videos what transmission are you using?

[@umbuibui1]

Everything we’ve gotten from them has withstood boulder impact!

[@micahgreen4609]

Such a fire build 🔥

[@feenyx6394]

Fire, as always!