RIVER RECOVERY! NEW Mercury Pro XS Problem (SOLVED)

[@kevincrawford6936]

25 hrs on my Merc. Thank you for pointing out this problem before it happens on the water. 👍👍

[@robertmonroe2665]

I think your videos should no be censored or beeps just straight up uncut. I think its hilarious listening to you guys and I love it. I have a 2020 Z-19 4 stroke, does mine fall under this category or is mine to old for this issue? Thank you and you guys are awesome.

[@crackrush]

NO BLEEPS! Learned a ton from the channel.. Keep it going! A day in the life would be sweet!

[@steveahle9921]

Full blown rants are awesome🤣

[@rustedoakcraftsmanshop3308]

C’mon Mercury! They’re like the Ford designs of the outboard underworld!

[@havocsquad1]

Should have worn the "May the Force Be With You" Team Marine shirt to that boat recovery. Might help where the dropped change in the lake lacks.

[@kirkreusch5704]

The shop videos and this type of recovery/on water repairs. 👍🏻

[@chriswaroblak979]

Just picked up a 2023 new bass boat with Mercury 225 4 stroke. Already got a recall notice on trim motor. Haven’t even taken it out yet

[@tristanschaper281]

What does your recall notice state about the trim motor? What is the issue and the fix?

[@waynewalters5813]

Like to know also.

[@aginnd5331]

People please stop buying mercury!

[@scottjacopian3191]

Did you receive the notice snail mail, via email...... is it just the 225? I have 20 hours on a new "23" 150.

[@rickvann3489]

As soon as you said it won't trim up I knew exactly what it was. Simple fix, now I'll watch the video to see if I'm right. So the owner doesn't pretrip and check his boat over and all you do is take the set screw and use thread locker on it problem solved.

[@kevinloper6551]

Great video, that's why I own a Yamaha!😊

[@mikethetoolman8776]

how tight should the trim pin be? ok to remove and apply loctite or is it a one-time and done bolt? i marked mine with a line to watch

[@ykwit637]

Tees look badass! Just ordered my first boat with a merc and for the troubleshooting advice you give I get a little piece of mind. Ordering my tee. Thanks.

[@jonnooney7102]

What years have the trim pin issue ....have yet to see one in my shop but I work on older stuff mostly. Not a dealer.

[@GregHolcombe]

Look forward to every video

[@mikebennewitz7019]

Give us Team Marine uncensored! I believe there's only a short time limit at the beginning of videos you can't swear for before anything is fair game without repercussions

[@rangerbillz19]

We just got back from Ky lake and wasted our 1st 2 and 1/2 days of our trip! Same thing!!!

[@jasonspandet6058]

I would love to see the smoking series merch come back I missed out on them and I really wanted the Marlbro style shirt.

[@scotthunter8013]

Heck yeah, want it all!! No censoring

[@chestophercolumbo4561]

Waiting for the highly anticipated White River Marine field trip 😁😁

[@johnm2617]

😮😮 I'm going to start throwing change in the lakes I'm fishing! When I dump the boat in ! I can always use extra help

[@TeamMarineService]

Good luck!

[@kendalllunsford775]

Uncut brother.... Let it all fly....!!!

[@christopherboyette6058]

I lost screw out of pin found a bolt that would fit for time being. Put the bolt in and it still going into limp made around 3500 rpms any clue how to fix what's going on

[@sheade_mcshyster]

Be who you are.

[@fishingTG]

Can you show us the right way to do a compression test on a outboard if all we have is a simple compression tester???

[@dwyneguitreau853]

Over under on the Skeeter ZXR 225 an just won't to hear your thoughts on the 225 SHO Not much info on the size rig awesome videos tho man thanks for what y'all do

[@JORDAN_O]

So what would you have to do if it didnt trim up how would you get it back on the trailer??? …. Shot out to the river gods

[@geostrong3606]

Hi sir. I have a mercury outboard 125 yr 2000 water went over the transom the trim went up and stayed on had to disconnect the battery to turn off any h elp would appreciate thk

[@Mrgamingboy2150]

Great video Andy

[@douglasschmidt6873]

😂 i remember asking you guys to make this video 2 years ago it happened to me on New Year’s Day nothing open full send

[@LindustriesOutdoors]

Didn't they fix that on any of the newer ones past 2023 and release a fix for it to replace that set screw with something else?

[@victorremick9721]

Do what you do. Thats real

[@mikecamalier2653]

Great video Great information. Bassmd

[@darinmartin711]

How does Mercury keep dominated the industry? Seems like every major tournament trail they are strapped with a merc. You don't see near as many of the other brands. Probably more Mercury than all the other combined. I would like to know the answer to that. I know they have more power but seems more trouble too

[@hydro_rebel7741]

Wish i saw this video a couple weeks ago just pruchased a new boat with this engine. A little concerned now

[@Friscotxman]

You should be ok now, was more prevalent on 1st editions of 4stroke, but as he said nothing wrong with checking from time to time. I check the engine on my 2023 Z520R every two or three outings. Better safe than sorry.... Congrats on new boat.... Semper Fi

[@hydro_rebel7741]

@Friscotxman thank you. And thank you for your service 🤙🙏

[@KathyShaw-lp5jy]

Great shows, your hilarious

[@patpollack1109]

Is that only the big motors? How about a 90 tiller?. Great videos!

[@krr6581]

Rants are good!

[@brentbackus7236]

Let it Rip - No Bleeps!

[@ShaneJMcNair]

NO BEEPS... post a disclaimer "In a Language You Can Understand Ahead" 🤣

[@MARKLOCKWOOD2012]

Our Evinrude E-tec 150 has a cooling issue that’s not the water pump. Anything over 3,000 Rpms on plain the over heat alarm goes off on gauge What’s weird from brand new Ranger Z118 it was intermittent. I live in south arkansas no technician no way to diagnose. Stuck thermostat bad sensor something keeps tripping the heat alarm. Pumping plenty of water. If you know where i can locate a part. It was never fixed even under warranty

[@Dawson6434]

Have you seen any issues with mercury dfi oil gelling in the remote tank?

[@KevinRicard-l6j]

I want no no I need a live shop life!! Full send on the cussing please

[@Woody6619]

Andy didn't check to see if tail lights and turn signals working naughty naughty

[@tylercampbell7555]

It doesn't trim, but sounds cool when it fires up.

[@TeamMarineService]

HAHAHAHA

[@mattkolstad9036]

RANT, FOR THE LOVE OF GOD, PLEASE!!!!! I've been a service writer for 20 years, LET IT OUT!!!!

[@plumbplumb458]

no bleeps let the ducks fly!

[@patrickpatterson8565]

Looking forward to live

[@krisramos7453]

I have the same exact z19 and 200 PXS. I’m having the same issue but the trim pin and set screw haven’t moved. Could the trim position sensor lead to the same thing? Or is there a chance that the trim pin and set screw are still in there and the issue is still happening

[@krisramos7453]

I just went out and looked the trim pin and screw. I undid the set screw and I think the pin has rotated slightly and the set screw isn’t threading into the pin. Can I just adjust the pin and locktite it or do I need a new pin

[@fishncoach8699]

I like to watch videos and my kid is a repeater! Keep the beeps!

[@CMDAVISs]

I hope that was sarcastic when you said a nitro felt like you were in a Sportscar. And the river gods have been against me latley. Fuel issues , prop issues. Now burnt wiring issues and who's knows what else lol. 😢

[@Grudzien34]

Let it out Andy

[@kylemullinskpmoutdoors3816]

I know my comment isn’t relevant to this video per se but, Andy you really need to try and help persuade Suzuki to start rating there engine at the prop shaft and not at the power head. If they would they would have some performance and actually have a true apples to apples to merc and Yamaha which both rate there motors at the prop shaft. If we get enough people prying on them maybe they will change and rate at the prop shaft

[@TeamMarineService]

Suzuki’s main issue is their props not the horsepower. The lack of propping knowledge from dealers is crazy. We can make them run within a mile an hour or so of any Merc or Yamaha. Lack of speed isn’t an issue if you know how to set them up.

[@kylemullinskpmoutdoors3816]

@@TeamMarineService does the scorpion tend to be the best prop in general for that motor? I have a buddy who put a Suzuki on his skeeter when his Yamaha blew up and he put a solar scorpion 27 on it and he’s running the same or a touch better than his Yamaha did.

[@salpinto4474]

This will be gooooood!🤣

[@adamportner8102]

Yea river Gods

[@dariusking2927]

Mercury is garbage would never have one 💯💯💯💯💯

[@BrianHinz-u6i]

Smart man I got rid of my merc last September and went with Suzuki I couldn’t be happier.

[@chrishampton8842]

Unbleeped rants please😂

[@MUDDRAGGERRC]

What about a 2022 standard 115 hp 4 stroke

[@scottsundstrom3529]

My Evinrude G2 hasn't had any trim problems... 😂

[@mikechamplin4147]

No bleeps.

[@kylebrandstattfishing7270]

Uncensored

[@patricklangley7516]

Love the shop videos!!! Gonna order a new shirt for sure!! 2019 Suzuki 175. No problems at all!!!

[@zgambler1]

Will stay with yanaha

[@Dawson6434]

Thinking about repowering my basscat pantera 4. 200hp sho, 200hp Suzuki or 200hp merc?

[@Lawnfella]

Andy will tell you Suzuki

[@LindustriesOutdoors]

Merc

[@brandonwoodcock4374]

Hard to beat the reliability of yamaha and Suzuki. I have a stratos 201xl, and I'm gonna replace my 200 etech with a yamaha 200sho

[@TeamMarineService]

200 hp we would go SHO!!!

[@Lawnfella]

@@TeamMarineService ahh I was incorrect

[@livingmissourisoutdoor6815]

If it been an Evinrude, you could concentrate on more shop work. Just saying……..

[@harveywalker1560]

👍

[@kevinloper6551]

No Bleppin let her rip! 🤣

[@glennross3521]

Uncensored! Want to hear the rants, the cursing, etc. Let’s do it!

[@timwilhelmson8707]

RANT AWAY

[@robertfirasek5296]

That’s embarrassing using a back up camera to hook on to a trailer, maybe I am showing my age. Good video keep it up always a team marine fan

[@leightonhoward345]

Bleep things out on the live? Fuck that....

[@siviunative5241]

Show more clips of you working ,than talking 😁and no blip please

[@Andrew-bo8ct]

The boat God’s love him, the teeth God’s..not so much.

[@kylevodden19]

Just upgrade to a Yamaha sho and never look back

[@FirstnameLastname-vy2dg]

For what does it profit a man if he gains the whole world yet loses his soul to hell? PSALM 115 1Not unto us, O LORD, not unto us, but unto thy name give glory, For thy mercy, and for thy truth's sake. 2Wherefore should the heathen say, Where is now their God? 3But our God is in the heavens: He hath done whatsoever he hath pleased. 4Their idols are silver and gold, The work of men's hands. 5They have mouths, but they speak not: Eyes have they, but they see not: 6They have ears, but they hear not: Noses have they, but they smell not: 7They have hands, but they handle not: Feet have they, but they walk not: Neither speak they through their throat. 8They that make them are like unto them; So is every one that trusteth in them.

[@JonJ-o1y]

We want to hear the rants without the bleeps!!

[@ReelJoyy]

There is only one God. Jesus Christ. You really think you can bribe a God? You will have to answer to God on judgement day for mocking Him.

[@TeamMarineService]

I will be sure to ask his forgiveness at heavens gates! 👼

[@bommert3816]

Mercs are turds! Get a Yamaha SHO and thank me later!

[@aginnd5331]

Nothing but mercury junk!

[@jwboilermaker]

No bleeps

[@jasonboose9486]

Uncensored

[@edwardmarshall8795]

Uncensored