6.5.1.3 Packet Tracer Skills Integration Challenge

[@dikkemelvin8001]

Thank you dude! you always help me in class. Love from Holland

[@მიშოცქიტიშვილი]

this test was hard...thankyou for uploading this incredible video

[@TechAcad]

Glad you liked it!

[@ryanf32233]

another incredibly helpful video. thank you so much for all that you do!

[@TechAcad]

Thank you so much my dear Friend.......

[@michellemorales5522]

im so so glad i found you!!! about to start this lab :D

[@TechAcad]

Glad it helped!

[@abiodunobayeju5012]

Great job man! but you didn't include the description as required and that usually carry the biggest score in the marking scheme

[@catherinekuria8834]

Thanks for the heads up. Noted💯💯

[@abdullahkamil8041]

thank you mate this is helping my class progress

[@TechAcad]

Great to hear! And thank you so much for your great support and sharing my dear friend...!!!

[@BobHenry4161]

Why does your lab start with 15 /100 completion ? Mine starts with 0

[@mortimermouse3086]

I was stuck on the default gateway for switch 2, thanks so much man.

[@TechAcad]

Thank you

[@calin1980]

You know your stuff! :) brilliant! Also you can telnet into Room-145 switch from any end device command prompt via its VLAN 1 IP address :)

[@dimetriquinata5646]

Thank you so much!

[@TechAcad]

Glad it helped! And thank you so much for your great support and sharing my dear friend....!!!

[@cyndydeeg9492]

Nice video. My question is why towards the end at 13:00 you check the IP address, Submask and Default Gateway. Why on Reception A did you not correct the Submask as in the Addressing Table? Granted its not a big thing and works with the Broadcast but just curious. Keep doing these they do help!

[@jin1st852]

very helpful Thank a lot my bro

[@TechAcad]

Thank you so much

[@mimarsinansarac770]

Thank you my friend, Ehrenmann.

[@KrazySlayer]

Great Explanation. Thanks for these videos!

[@golde8586]

I performed each step carefully but still completion is 75/100 i don’t understand why it is so?

[@MGN33]

you are a life saver

[@TechAcad]

Thank you

[@mavrin1497]

You're a life saver! Thank you!

[@TechAcad]

Thank you

[@buntykumar8380]

thank you, its very helpful.

[@TechAcad]

Glad to hear that!

[@needmoredan]

You're my TA

[@TechAcad]

Thank you so much my dear Friend for your great support...

[@lovepreetgill5345]

Great video !! However i just had one question at 12:00 you changed the default gateway in ip configuration but in my project it is locked so how can i change it in the cli of manager A and reception B

[@cisconetworksandcodingacad2749]

nice video bro !!!!!!!!!!

[@TechAcad]

Glad you liked it And thank you so much for your great support and sharing my dear Friend...

[@ladyjay7009]

Thank you!! Very helpful!!

[@TechAcad]

Glad it was helpful!

[@gilbyska6126]

its help full dude . thank you

[@TechAcad]

Thank you so much my dear Friend.......

[@The_raTex]

thanks dude

[@TechAcad]

Thank you my dear Friend...

[@MassEvans]

Thank you so very much :-)

[@TechAcad]

Thank you

[@salemalvaradopacheco4222]

Thank you!!

[@TechAcad]

You're welcome! And thanks for your great support my dear Friend...

[@NortheastNomad]

Thank you so much

[@TechAcad]

You're most welcome

[@jasleenkaur4747]

I am not getting replies after ping command, it says destination host unreachable. I did exactly as yours, but no idea where did i go wrong. Can someone please help me out with it.

[@lucalorenzetti5645]

Very helpful man! But don't miss the configuration of "Room-145"? i try with telnet connection and function but don't with SSH connection, why? In folllow step by step the ssh ability config in the chapter "ssh access" but don't work

[@Tarrinadecomida]

Thanks!

[@ruairimcalinden971]

do you need to use all of the console commands or can you just go into desktop and configure the IP and masks from there?

[@TechAcad]

Usually PCs IP Address can be configured from the PCitself. Console is used to configure the network devices..

[@mareeo01]

Love u man❤

[@kennethlingad]

How to do the ^Z in 5:56

[@TechAcad]

It is a shortcut key. Press ctrl+z from your keyboard, so that you can jump to privileged Exec Mode

[@kennethlingad]

@@TechAcad I didn't expect you'll reply, THANK YOU VERY MUCH

[@TheDagna85]

thank you!!!

[@guripatwalia9438]

What is the meaning of ^Z

[@TechAcad]

Hi Its a shortcut to go to Privileged Exec Mode directly. Use Ctrl + z so that it will go from specific or global configuration mode to Privileged Exec Mode. Thank you

[@Durell1100]

exit

[@ginabarekzay4113]

line vty 0 4 for router

[@andrewscott2464]

Hello! each time I enter the default gateway the packet tracer doesn't give me credit for it even though when I run show-running config it shows up as the correct information. I followed everything step by step. Any solutions?

[@TechAcad]

I think it might be the problem with you packet Tracer version. I like to know the version u r using....

[@andrewscott2464]

I was using P.T 7.11 as it was issued directly by my instructor, turns out I had simply missed information regarding the default gateway. I really like your videos and hope you keep up the good work!

[@BobHenry4161]

@@andrewscott2464 How did you input the missing information?

[@pegasusnation]

I dont understand. I've done the lab 4 times now its saying my vlan1 ip is incorrect. but i copied it form the table. Any idea what the issue might be.

[@pegasusnation]

make that 5 times

[@SinCityWayne]

use the reset activity button until you get the same one that he is showing in the video.... Fyi the activities are random, So just push reset activity a few times

[@SinCityWayne]

Click the Reset Activity button to generate a new set of requirements.

[@TechAcad]

Some time its depends on the Packet Tracer version also. I like to know the version you are using....? Thank you

[@brindamourgallina84]

Thank you so much!

[@TechAcad]

Thank you my dear Friend. ....

[@genrevefernandez195]

Thank you!!