2.2.2.4 Packet Tracer - Configuring IPv4 Static and Default Routes

CCNA Routing and Switching: introduction to networks Packet Tracer activity 2.2.2.4 - Configuring IPv4 Static and Default Routes
Follow Us on
Facebook: / techacad4u
Blogger Website: techacad4u.blo...
2.2.3.4 Packet Tracer - Configuring Initial Switch Settings Click on • 2.2.3.4 Packet Tracer ...
6.4.1.3 Packet Tracer - Configure Initial Router Settings Click on • 6.4.1.3 Packet Tracer ...
7.2.4.9 Packet Tracer - Configuring IPv6 Addressing Click on • 7.2.4.9 Packet Tracer ...

[@SirBiscuit45]

I'm doing a CCNA2 Networking course at TAFE in Perth, Western Australia, and I've gotta say, your videos have been very helpful during my course, very clear and easy to understand, Subscribed, thanks again :) 👍

[@TechAcad]

Thank you Joel for the support. I will maintain the quality with the future videos too.

[@shonaldutt3534]

Thank you for your extremely useful video, which I will utilise for my Cert IV Cyber Security Course at Tafe Queensland by following all of your instructions. Thank You. You are better then my teacher in explaining

[@TechAcad]

Glad it was helpful!

[@davidkain7]

Thank again and thanks for introducing me to the PT feature of checking connectivity by sending a packet between end devices.

[@suhibhazzoom684]

I am grateful for what you do, I really benefited from all the videos that I watched. The way you explain and the details of giving commands is an important thing..I don't find a word expressing how much I thank you.

[@TechAcad]

Glad it helped!

[@salemalvaradopacheco4222]

you are simply the best, I can only learn with your videos!

[@TechAcad]

Glad you like them! And thanks for your great support and sharing my dear Friend....

[@twanderia]

thank you. I like how you teach instead of just giving answers.

[@itzskullslice4458]

omg thank you i was getting no where and this really helped me understand

[@TechAcad]

Thank you so much my dear Friend for your great support...

[@vijayasokan2045]

Very helpful to my ccna course. thank u friend

[@TechAcad]

Thank you so much my dear Friend for your great support...

[@rainbowdash3059]

Thanks again for a clear, precise explanation. A+

[@monicaalcorta557]

Thank you, so much! Very Helpful and to the point.

[@zebinho8353]

thank you my guy, you are a life safer.

[@TechAcad]

Thank you.

[@zoroarc6364]

Grande dall'italia

[@topazbear2]

Thank you for this video it really helps me with my homework

[@gabelanz9188]

Thanks for the video, this helped me understand a lot better! I appreciate it!

[@TechAcad]

Thank you Gabe Lanz

[@GA-tl4iy]

Thank you so much, well done , another great video. Thanks again and God bless, MIke

[@TechAcad]

Thank you so much my dear Friend. ..........

[@sjf5152]

Thanks for these videos ! You truly are a HUGE help!!!

[@TechAcad]

Thank you so much my dear Friend for your great support...

[@sjf5152]

@@TechAcad you're a great teacher ! Keep doing what you do ! Thanks again 😊

[@allsaints519]

Thank you so much this helped me out alot

[@TechAcad]

Thank you my dear Friend. ......

[@YB0602]

I'm really confused why you used the IP 172.31.1.128 at 5:57. I don't see that address anywhere?

[@christophera.kreusel4329]

I love your videos.

[@TechAcad]

Thank you so much my dear Friend for your great support...

[@hatemozasik7819]

Nice video my friend, very helpfull

[@jyreenaward3289]

I need some help with a customized PT. Is there a way I could send it to you so you can tell me what I’m doing wrong?

[@xlioneg2162]

YOU ARE THE BEST!

[@TechAcad]

Thanks for your great support and sharing my dear Friend...

[@VampireVvvvV]

Super helpful! Thank you! Explained well.

[@TechAcad]

Thank you

[@gaourahboulhanayanleh8175]

Thank you so much

[@TechAcad]

You're most welcome

[@luisfernandocorreasaenz4222]

thank, this served me a lot

[@febrinakristianipasaribu9796]

thanks for this helpful video

[@TechAcad]

Glad it was helpful!

[@kingwoods385]

Excellent video!!

[@k4tech164]

Thank you very much that is very helpful and thumps up

[@HammadBilal115]

You configured the default route on R3. Why? Can we configure the default route on any other routers R1 or R2. Why R3 was selected? Advise, please...

[@farahalmustafa6365]

for the default static route on R3, do I have to use the exit interface or I can use either the next hop or exit interface?

[@TechAcad]

For default static route we can use either of it. Thank you so much my dear Friend for your great support...

[@duversalgado2631]

gracias parcero

[@TechAcad]

Glad it helped!

[@SOMEXGAMES]

How are u so smart and knowledgeable in this

[@martymendez787]

Very helpful! Thank you very much!

[@Bluejob123]

Thank you so much....❤️❤️

[@TechAcad]

You're welcome 😊

[@prathamarifqisyafitrah4950]

thanks bro

[@TechAcad]

Welcome

[@shaymayhello]

Amazing! Thank you.

[@wangmeimei8980]

Thank you for this

[@TechAcad]

Any time

[@radhikakaruna660]

GOD BLESS U

[@TechAcad]

Thanks for your great support dear friend.... And May god bless you too...

[@danielschiffers9696]

Thanks man!

[@TechAcad]

You're most welcome my dear Friend. And thanks for your great support...

[@Hazetni]

So we can use serial 0/0/ or an ip ? (In the static route command)

[@Shannxy]

3:08 Why is there no route? Aren't all the routers are connected to the proper network?

[@matteocossu3236]

"Yes"

[@TheElpajarolibre]

THank you!

[@ELEchico]

thank you very much ! :)

[@wickedbeanz]

Where did you get the ip addresses from when you were configuring R1? (at 5:15)

[@Fluxtroid]

Hover over the router, it tells you the IP of the interface.

[@xXEmilXx100]

thanks!

[@TechAcad]

You're most welcome my dear Friend. And thanks for your great support...

[@nickyotto349]

Thanks you!

[@Marlin1510]

great!

[@TechAcad]

Thank you so much my dear Friend...

[@XeroFile]

When configuring static routes from R1 you used IP addresses, but then when configuring R2 you used the port number. Why did you do it that way? Would it still be alright when configuring R2 to input: "R2(config)#ip route 172.31.1.0 255.255.255.128 172.31.1.194" at 9:51? Awesome videos, BTW. Your explanations are great!

[@bensonthomas8398]

A directly attached static route relies on its exit interface in order for packets to be sent to its destination, while a recursive static route uses the IP address of the next hop router.

[@iam-xt6uw]

how can i check that my default routing is working??? can I check it using simulation or ping command?

[@TechAcad]

Hi dear Friend... Either you can use Ping or tracert.... Even you can verity using simulation mode.... If you need more help please contact us using our website, link will get from the latest videos description And thank you so much for your great support and sharing.....

[@GD-zc7kw]

Do you know where I can download the actual packet tracer files for the activity

[@SammyV]

hi where can we download the unanswered packet tracer?

[@TechAcad]

Hi dear Friend... We are planning a website in which you can download all files. We are working on it, so stay tuned. Thanks for your grest support

[@mariamahanun550]

how have you got the IP address and Next hop Ip address on the R1 when you did the config.

[@TechAcad]

If any doubt, You can contact our team.

[@1Woodroe]

where did the 172.31.1.196 come from?

[@dhansrl_chiii]

How to get the ip route, sorry, I don't understand.

[@TechAcad]

I will add theory for the same in future Thank you

[@dhansrl_chiii]

@@TechAcad Ok Thank You😁

[@stevedasilvaferreira6098]

hello sir, where do i download the actual original packet tracer.pka files for each activity

[@TechAcad]

Hi Thanks for your great support. We are working on it. Files will be available soon...

[@zenkurahidachi7915]

You are GOD, I WORSHIP YOU

[@wangmeimei8980]

Hello , whenever i ping it using simple pdu, it will say in progress all the time. Can you please help me

[@TechAcad]

Hi Because you are in Simulation mode. Change it to Realtime, so that you will get the successful message.

[@jaf798]

Where can I download it?

[@JaspalSingh-fx4ye]

When I put ip route on R3 it shows invalid input on 0.0.0.0.

[@TechAcad]

Please make sure that you given in the Correct IP Format.

[@403rbidden]

R3(config)#ip route 0.0.0.0.0.0.0.0 serial 0/0/1 ^ % Invalid input detected at '^' marker. why is it happen? :-/ dunno!

[@403rbidden]

Solved! R3(config)#ip route 0.0.0.0? A.B.C.D R3(config)#ip route 0.0.0.0 0.0.0.0 serial 0/0/1 %Default route without gateway, if not a point-to-point interface, may impact performance -> this was because 0.0.0.0 (there is a space here) 0.0.0.0 serial 0/0/1

[@TechAcad]

Give like this R3(config)#0.0.0.0 0.0.0.0 Serial 0/0/1 You have to give space after 4 zero, not dot

[@yassineelghizi8022]

what does 172.31.1.193 referes to ??

[@roguethemachine3928]

that was exactly my question i dont get where does 172.31.1.193 comes from

[@msclever]

i want this pkt lab

[@allanobial4460]

ummm, why does we use 172.31.1.193 in R1?

[@TechAcad]

On R1 they pre configured 172.31.1.194 THANK YOU

[@1Woodroe]

nevermind I see it

[@anisdlakic1224]

nista nam jasno nije