HOW TO DRAW THE CAM PROFILE (ROLLER FOLLOWER) I CYCLOIDAL MOTION

Draw the CAM PROFILE when the ROLLER FOLLOWER moves with CYCLOIDAL MOTION during out stroke and return stroke, as given below :
1. Out stroke with maximum displacement of 31.4 mm during 180° of cam rotation,
2. Return stroke for the next 150° of cam rotation,
3. Dwell for the remaining 30° of cam rotation.
The minimum radius of the cam is 15 mm and the Roller diameter of the follower is 10 mm.
The Axis of the roller follower is offset by 10 mm towards right from the axis of cam shaft.
0:00 Understand the question
1:02 Displacement Diagram
4:40 Cam Profile
#camprofile #cycloidalmotioncamprofile #rollerfollower #camandfollower #techcad #english

[@emperor4803]

I have exams tomorrow and this has really made everything simple for me 😊 Thank you

[@TECHCAD]

All the best

[@hyder4664]

An underrated channel with very helpful videos! Well explained!! You deserve more subs.

[@TECHCAD]

Thanks Dear for the appreciation and yours valuable concern. You can share the word of mouth of my videos with others...

[@fadiashraf5181]

So well explained ! You're definitely the best teacher !

[@TECHCAD]

Thanks Dear for the great appreciation.... U can share the word of mouth of my videos with others..... God bless you..,,👍

[@reaganomondi1940]

Thank you so much Mr it's a good explanation and it has really helped me 🙏🙏🙏

[@suryapavannandyala1934]

really u r explaination and animation was excellent to understand too easily..thanks for u r suject

[@TECHCAD]

Thanks for the Nice Appreciation.... All the Best....

[@shobhitsharma2337]

Explained very well 👍🏼

[@TECHCAD]

All the best....

[@hemaelganiny]

thanks❤

[@ayushkumbhare3177]

Thank you sir 😊

[@hfsamsrur8631]

Thank you

[@sa_ks_hi..]

Thank youu so much sirr😇 it was very helpful to me

[@TECHCAD]

Thanks Dear... All the Best...

[@MechanicShoo]

very good ❤

[@SaurabhSinghbuta]

So beautifully explained ❤️

[@TECHCAD]

Thanks Dear for the Appreciation....

[@haidermajed2529]

👍🏻♥️ from iraq I am a mechanical engineering student

[@TECHCAD]

Thanks Haider for appreciating my video.... U can share the word of mouth of my work with others... All the best...

[@omnamahshivay3310]

Thank you very much😇😇

[@TECHCAD]

All the Best....

[@sig_ahmedmady3399]

thank u so much

[@edutechguruengineeringlear4280]

kzbin.info/www/bejne/anrCn6h-jtJkaMU

[@_PRONAYDAS]

Thank u so much sir 🙂🙂

[@TECHCAD]

All the Best...

[@c_70_mohammadajmalturk46]

Nice explanation

[@TECHCAD]

Thanks And All the Best...

[@zenoking6172]

Thank you sir

[@TECHCAD]

Nice to hear my work helps u.. All the best...

[@edutechguruengineeringlear4280]

kzbin.info/www/bejne/anrCn6h-jtJkaMU ...

[@spk7054]

Similar with electronic cam profile right ?

[@gamingroger5660]

Maja aagaya sir 👍🏻👍🏻

[@TECHCAD]

Welcome Dear...

[@sky1600]

Awesome 👌 ❤️

[@SemeLomodong]

It's very good, but what of the velocity and acceleration diagram for it?

[@TECHCAD]

Thanks dear... For the velocity and acceleration diagram I will make a separate video....

[@akhileshakhi8874]

sir how to draw displcment , cam diagrm when out, dwll, return given in rotastions...? example :out storke=1500rotions dwll=3000rtons return:2400rotins

[@mrunmaydawkhar3512]

What to do for knife edge follower ?

[@TECHCAD]

Dear it does not matter what type of follower is , the process will remains the same. U can also chk the following link: kzbin.info/www/bejne/o32rnoqAi61sbpI

[@Unbeatable_Physics]

sir app please notes v daal diya kijye last time revision k liye exam se phle

[@TECHCAD]

Dear It will be uploaded soon... All the Best...

[@navinkumar7370]

Software used ?

[@TECHCAD]

its a Microsoft Power Point Presentation....

[@sujanm1984]

Sir roller radius is 10 mm

[@sujanm1984]

But you are taking 5mm

[@TECHCAD]

@@sujanm1984 its the diameter 10 mm not radius.

[@TECHCAD]

Diameter is 10 mm so radius is 5 mm

[@reaganomondi1940]

Thank you so much Mr it's a good explanation and it has really helped me 🙏🙏🙏

[@TECHCAD]

Thanks Reagan for the warm appreciation.... All the best...and u can share the word of mouth of my videos with others .....

[@tuhinsuryachakraborty]

Thanks sir a lot

[@TECHCAD]

All the best