Smart Door Bell using ESP32 Cam/ESP-EYE & Blynk

[@bryanst.martin7134]

I like! Might have solved my remote gate access needs. Over 100M from house to gate. Frequent deliveries, Kids, dog...

[@rohanguptamusic]

This channel single handedly dominating IOT on YT

[@rohanguptamusic]

@Carson Brayden Dude.. Give me a trick to get a gf first.

[@Voiateur]

You should learn how to set up EEPROM ES32 and NODEMCU with BLYNK

[@jicksonl]

Can I get notifications if my phone was connected to different wifi network or if am using mobile internet when I am away from my home..??

[@iCtrlZDesign]

Great work!! I've been looking for information about smart peepholes for days, but there is no "simple" peephole that doesn't look like these "super tech junk" and that can have a dead monitor and a direct link to HOME ASSISTANT. I have seen some of your videos and I wanted to ask you if there is an ESP32 with greater refreshment (so that the image looks more fluid) in a display on the door and that at the same time can send said information to HOME ASSISTANT!? All this with a single ESP32 and a 120-160º camera, is it possible?

[@MrTalhakamran2006]

So it doesnot store on cloud. It only works on cellphone if you are on the same wifi network, correct?

[@soundarpandian3423]

Proud of you bro

[@nirutg5130]

Thank you very much for sharing, please kindly share how many item list model to buy to integrate to create this project?

[@wonkastudio-johnny]

how about voice communication as well.?

[@Ashok-tm5bz]

I'm love this type of projects and Ur videos from 1.5 years, Can make the project on live steam using blynk app for more than one users. Please

[@techiesms]

I’ll try

[@prateekgupta3666]

Yes you make it and share the project with your family members or you can share your user name and password

[@Techonsapevole]

@@techiesms +1 is there a board where you can stream audio like a walkie talkie?

[@karthikshet6226]

Can I do using raspberry and raspberry cam?

[@kUMAR22-o6q]

Im using esp32 cam which one should i uncmment

[@nimalw4427]

Hi, Thanks for all your videos. I really enjoy your lively demeanor. I have tried to create the doorbell according to your instructions and code. As Blynk is 2.0 now, few things seem to have changed. I was able to get the program running but cannot get the picture to show in mobile app. Notification is working. Appreciate if you could take a look and post an update.

[@lucasmoniz4166]

Hello, greetings from Brazil. I did this project using ESP32-CAM. However, the face detection does not work and notifications are only sent if you jump the 4IO and 5IO terminals. Please, could I send the code or make a video exclusively for ESP32-CAM? Thanks.

[@wattage2007]

You have a very likeable manner :)

[@samsonshankaran6051]

Nice project. This might put some smart door bell system manufacturers out of busines.

[@techiesms]

Hahaha

[@raahimirfan5996]

Can we use NodeMCU ESP8266? Thanks!

[@harshadlokhande_veditekk]

for ESP-EYE, I am getting "Compilation error: Error: 2 UNKNOWN: text section exceeds available space in board" , I am Using ESP Board ver 1.06 and Selected Board as "ESP32 Dev Module"

[@atharvajoshi9099]

Actually i want to make an esp 32 cam robot car and i want to control it through google assistant it will be possible by this esp 32 cam or should i use node mcu with it?

[@letanat8966]

Please help me use esp32 cam to both record live video while taking pictures saved on memory card

[@chimpofm]

Another Perfect video! Hello from the UK. You have saved me so much time on my project. I just followed your instructions to the letter and it works perfectly. I connected it to the timer. So it takes a photo every hour. Now it makes timelapses of my greenhouse! thank you. I understand you are very busy. Could you make a video connecting a ph sensor. Ec sensor and ds18b20 temp probe. And add it all to blynk on an esp32. To make an Iot water monitor. Dont forget youll need yo isolate the ec from the ph. I have been using the df robot trio. (Ph ec and isolator). But they are really expensive. I and the whole hydroponic community would love a cheaper solution to this problem.

[@rohitjg]

Will it work if the phone is connected to different WiFi network?

[@techiesms]

Yes Watch this to make it over internet kzbin.info/www/bejne/pqSUnmmYjNype68

[@rohitjg]

@@techiesms thank you

[@seawalker99]

Hi. Very interesting project. Is their anyway we can add face recognition to this project?

[@giancarlomejia5496]

i like your proyect but i have some questions this only works in my house or I can see it from anywhere in the world

[@bogdankdw]

hello, if i.m buyng esp32-cam do i need to buy all the components from behind?

[@ankitjain-bv3pd]

Kindly tell me the led and button pin no. If esp32 cam board Because I have esp 32 cam, I don't have esp eye

[@sanjubaba1978]

did you find the pin numbers to be used for LED and Button in esp32 cam? do we need an extra button to be use in esp32 cam becoz there is no such button available? Kindly share.

[@pradeepkurmi8762]

Is this project work with other networks like my mobile in other networks and esp32 in other wifi network??

[@josecorreia2584]

Does it work when you are away from your network?

[@voiceoftruth1O1]

Sir. can you make this mesh network offline project without internet. Because we don't have online access. Thanks

[@kavitahkavi921]

Can you make esp cam connect with a gps router which can be easier for monitoring the place that i wanna view from far from the place

[@rameshk.pandey6883]

Hi, whenever compaling the code ,i am getting error ,camera_pins .h , in every esp32 cam eye project including this project too. please i hope you can solve this problum n rply.

[@gerardomorales9203]

Good Proyect, but Is there a solution to continue receiving image when I connect to another SSID in the same LAN?

[@karthickm3585]

Sir I am a beginner of the and esp8266 project but how I learn Arduino language which website and author you learn this Arduino language

[@prateekgupta3666]

I made sumilar project with the help of node mcu and my existing ip camera long ago using pushbox notification.nice project.can you share some code in which it can open door lock using face recognition?

[@techiesms]

Let me first try to make that

[@shubhodeepmandal1499]

Can I make a bylink like iot app but a customised version??

[@ahujaplastics]

You said that blynk and cam board should be on same wifi network so does it means it is running on local network and not internet. If thats so it means it will not work if I am outside my house. Plz look into it so it could work on internet

[@techiesms]

Ya it’s just for local area network

[@ahujaplastics]

First of all thanks for such a quick reply. Can we make it for internet??

[@Ruma9614364681]

Please make a same video with smart door lock, or a stepper motor lock.

[@lixxus-m]

great work, im interested if you can make it a door bell with a button using gpio and potentially integrating with home assistant ?

[@yashs.kacholiya1569]

Can it be controlled with apple homekit

[@charleena2319]

Super cool. Do you know how to save the pictures ?

[@tusharshahi1724]

Sir, PLS. MAKE A COMPLETE VIDEO on smart door lock system.. Which has this feature and the door lock feature too....

[@techiesms]

Well I don’t have esp32 cam Otherwise I would have made that complete project

[@juliendeal3083]

Nice video, but how you have connected the doorbell visible into the intro video on esp-eye?

[@umer4414]

Is there a way to do this project without Blynk i.e. using ESP32-CAM and a simple android application?

[@mixall3508]

Samad from Turkey Istanbul Good morning Sir how are you doing I hope fine I need your help for purchasing latest system i did tell you before my 12 years old Son is doing these project is that possible to help us i have friends in India they can send that to me my how can i contact you ?

[@navadeep025]

Can't we host real time video on global IP (not only WiFi) in blynk using ESP-32 cam. Please make a video on it.

[@linuxentertainment645]

yes you can, iam try use port forwarding using mikrotik router and send data video from esp32cam to blynk in public ip using vpn

[@navadeep025]

@@linuxentertainment645 can you explain more on it? Or provide link to DIY .

[@actimix9]

May I know the input, process & output for this project

[@sanjubaba1978]

I am having an esp32 cam board, to implement the doorbell solution do I need to interface the external button(which is not there in esp32 cam) to the functioning of the solution. also, suggest about the PIN numbers as well. if I could successful to implement this solution, would love to share it with you. Many thanks in advance.

[@IMRANKHAN-we9un]

Very good project but very costly compared to your old camera projects....

[@krrishchheda2252]

Hello Sir, How you connected push button to door bell

[@surajmhaske2552]

Can you make video regrading k210 processor?

[@adityakanakamalla8979]

I got an error after uploading code ...i.e in serial monitor....instead of showing up address..I'm getting camera not supported...and camera probe error ox2404...can u suggest best way to overcome this problem

[@MRREDDY-ih7wb]

camera_pins.h: No such file or directory how to solve this error

[@saketmankar3648]

Would like to use esp32cam as a attendance +door lock Can u help

[@caothucdang9696]

The link code above is dead. Can you give me the link code again? thanks.

[@nagarava]

Also add face recognition opening door bell

[@aruntayal9467735501]

Can you please add image recognition as well so that if someone from your family is there the door opens automatically and If there is a stranger then we will decide what to do.

[@techiesms]

Working on it.....

[@aruntayal9467735501]

@@techiesms will be happy to help you in anyway

[@debasishbanerjee3600]

IT'S A USEFUL PROJECT BY TECHISMS. Thanks for sharing ur knowledge Sachin

[@techiesms]

#ShareVideoShareKnowledge

[@muix]

How to do real time voice communication between node mcu and Android Pleaseeee replyyy

[@biancabersinar376]

Image Capture : ESP32CAM-Blynks It works!! many thanks!!! is it possible to create connection for Video streaming : ESP32CAM-Blynks ??

[@gileansolomonsz6931]

Hi Mate from Australia, awesome video as usual. I have made this project and it works like a charm. I have a question, this drains the battery and the cam stays on all the time, so it's not something that one I can design a 3d box and fix on my door. Is there a way to, 1. have it boot send the image and wait for the door to be opened and then sleep again? 2. I am using mqtt with home assistant, can this code be modified to use mqtt? not a professional home automation guru, have learned watching heaps of videos such as yours and got interested in it during lock down so any help will be appreciated

[@mohanrahangdale9760]

Can we programm with a smart phone

[@techiesms]

Means ?

[@maliarif2023]

Another masterpiece , thank-you sir

[@darshanpalsamkar8639]

Is it possible to get image from mobile location (anywhere in world).?

[@techiesms]

Not with this project

[@thisisjoyjacob]

Studio Renovate kardia??woww , yaa lighting ka better use? Bit that faint Yellow light in background looks to attractive and soothes the whole video BTW project Ekdum solid idea.

[@techiesms]

Thanks bro

[@piotrkuranty8512]

It works only on a local WiFi network?

[@techiesms]

Yes

[@piotrkuranty8512]

@@techiesms Why? A better solution would be to connect ESP to your own wifi network. It is possible?

[@piotrkuranty8512]

Sorry, I misunderstood the description. However esp is connected to a wifi network

[@sujanadevarapu9915]

Can you please share circuit connections

[@hajeevanselvanayagam9722]

Video was awesome. Can’t we stream live video?

[@Sharan141]

Awesome video buddy..pls make access control with esp 32 cam and blynk

[@techiesms]

What u want to make ?

[@Sharan141]

@@techiesms access control with face recognition on esp32 cam with blynk support bro...I have been working on this for more than a month...but still trying...pls help me out bro

[@lucasmoniz4166]

@@Sharan141 Me too. I found this link, but the video strream doesn't work. robotzero.one/face-recognition-with-blynk/

[@elave16]

is it possible to stream video also?

[@sujitmishra8249]

Nice project sir. Will love to see this project with smart door lock. Please make it sir..

[@ahedalbadin2889]

Great project, I love it Unfortunately, it works only on local network Right??

[@tseawell90]

Yes so it’s not very useful

[@maliarif2023]

project is AWesome.!! Sir, can we make this project with nodemcu board?

[@nithinsnelamanglaKA52]

what was the cost

[@ada3046]

How about using pubsub client library

[@s.husain6125]

How to get Image in database sir means without use of bylink app how to get images

[@prathambumb5593]

Yep

[@chimpofm]

Download images from sd card.

[@venkateshe7506]

Nice project. I have done similar but I pulled image from security camera and I will get notified on telegram.

[@giancarlomejia5496]

hi my friend i like know you notified on telegram some video or information

[@dineshkumarnandakumar546]

can I get a video stream instead of just getting a pic?

[@techiesms]

kzbin.info/www/bejne/joPGhYifjbqre68

[@chimpofm]

how do i save the images taken by the doorbell cam to the SD card?

[@Pablochocobar-321]

Awsm man 🔥 love from tamil nadu

[@Shiv4717]

Is it necessary to connect phone with same network if we are not at home how do we know who came at doorstep

[@techiesms]

Then this project won’t work. This is just for local area connections

[@Shiv4717]

techiesms so we can’t make it for globally use as we are connecting with blynk app

[@chimpofm]

I too have this question. How would I set up blynk and esp32 to work globely .so I can see who knocked my door when I am away from home.

[@Shiv4717]

Welshcakes I am trying on it if I will find any solution I will Let you know 😕

[@chimpofm]

@@Shiv4717 thankyou. I too will reply with a solution if I find one.

[@debasishbehera9783]

Great project sir👌👌👌👌

[@hamzasajid3773]

I am doing this project. But i t shows only ............... On serial monitor

[@Voiateur]

Thank you my friend I follow you from Algeria

[@techiesms]

Keep loving, keep supporting #ShareVideoShareKnowledge

[@eduardovillar2211]

Hello, greetings from Spain! If I understand correctly, project just only work if the blynk app is connected to the same local network, right? In your case you call a function notify when a button is pressed but can be used other launchers like time or virtual button on the blynk app. Would be great if project works on the cloud and remotely to be used as a surveillance system or remote door opening ( ej when amazon call home and we are not in :-). )

[@vsitlogin649]

Can we stream live video and recording?? via using esp32 cam / Esp Eye??

[@techiesms]

I tried streaming but didn’t get success

[@binodkhemka1725]

I need your help in one my projects. Can you help me send text to a 16X2 LCD using blynk

[@vikramjeetpaul]

Amazing project... I loved it a lot

[@yogendrajamsariya1193]

Lots of love bro,,,,

[@adeshbhadauriya3636]

sketch_apr21m.ino:18:25: fatal error: camera_pins.h: No such file or directory Sir ye error aaraha hai Please solve

[@GK-rr3fe]

good concept sir...wonderful

[@techiesms]

If you really loved it Do considering sharing it with others #ShareVideoShareKnowledge

[@GK-rr3fe]

@@techiesms definitely sir and you want to make more different videos like this.

[@deweshkumarmahur]

sir make a video on arduino latest board portenta H7.

[@rinku2004ful]

Another master stroke from techiesms, i was waiting for this. Thnx sachin ji. Special love frm mp . Keep spreading such knowledge.

[@techiesms]

Thanks for Such kind of love and support #ShareVideoShareKnowledge

[@saijayakrishnajk1389]

Super bro u are awesome I want ur advice on one project

[@techiesms]

Yes tell me

[@saijayakrishnajk1389]

@@techiesms my problem can we add face recognition to this esp eye or 32 is there any alternative for esp cam which has more pixels Thanku sir waiting for your reply🙋‍♂️

[@zhixuan24059]

Hi, i really like your video. But may i have the connection of the component? I had try many time but it fail. And i cant get it.

[@waqaskhan-ee2pc]

Not working , Compiling error

[@shreyas8040]

Thanks for that

[@tirupatibalajidighole7500]

*superrrr project* *LOVE U*

[@PavanKumar-os2qv]

Does this work on local server or the cloud ?

[@techiesms]

Local server

[@pamarthikanakaraja9812]

Good video Do more videos on TTGO T-CALL board it is awesome board for designing IoT Projects

[@techiesms]

Sure Just keep loving and keep supporting

[@motivation.ai.shorts]

I am working on a project in which I need a live video stream from the ESP32 cam module on the Blynk app’s Video Streaming widget. The following code i have used is in Arduino IDE example Examples>ESP32>Camera>CameraWebServer. Using this code I get the camera’s IP address on which a perfect live video stream can be seen using a browser .But i am not able to view stream when I use this IP address in Blynk’s Video Streaming widget. Could anyone please help me in setting up a video stream form ESP32 CAM in blynk app widget. Thank you