Using Our Rockets to Push a 1-TON Trailer!

[@samuelzachert3837]

This channel always reminds me of doing something stupid/dangerous with a friend and getting caught by their dad, but instead of getting in trouble he just sternly teaches you literally everything about how to do what you were doing. So much great info, keep it up!

[@nostradormouse3583]

Oddly, my best Mate's Dad is a physicist for the University of Wales, and Scientific Advisor to the Welsh Assembly.... I wonder...

[@nostradormouse3583]

I think the more compelling content would have been to get my mate's Dad (who has become something of a reprobate in his later years, with the most amazing and hypnotic eyebrow that resemble those of an Owl) and my Dad, who was an Engineer with an irresponsible streak 132 meters wide (yes, we measured it) together. I can see them standing round and agreeing that "if you can decribe it, I can build it", all the while their two clucky sons are trying to apply a basic sanity test to keep them from doing anything really lethal. "I'm almost certain you can't get hiold of one of those." "You'd be surpridsed what I can get hold of. I'm the Scientific Advisor to the Welsh Assembly! Bwah-ha-ha-ha-hah!"

[@dalehorton7748]

If you're gonna do it, Do it right. :D

[@PureAmericanPatriot]

THIS IS 'MERICA! I greatly appreciate that Tech Ingredients put this out just enough before Independence Day that we can all (very carefully, safely, responsibly, and patriotically) reenact the "The Defence of Fort M'Henry" during War of 1812. Only this time the bombardment of the heavens won't be from British Shells...100% Made in 'Merica! And for those of you from other countries...God Bless you all and I hope and pray you all celebrate the freedoms you enjoy and hope you all work to make your countries even better! BOOM!

[@wesplybon9510]

The best dad is the kind that realizes, when you're interested in something dangerous, that you're going to try it regardless of what he suggests to you, so he teaches you how to do it safely, all the way down to material waste disposal.

[@carsonfranklin6239]

One of the most enjoyable aspects is the absolute minimum amount of fluff, but an abundance of information using the correct terminology, and almost no fear in presenting the viewer with a complete picture. You're not hiding information away because it might be dangerous, that is tragically rare these days. Be concise, use the right words, tell the whole story. Been around since the photolexicon days, glad to see you've continued to follow your passions.

[@McDoucheVonDouche]

We need a 1 min Tiktok of this video delivered by a girl in bikini. We also need a plug for the healing crystals from s.c.a.m inc. so compress all this info into 30 secs and dont use fancy words.

[@glumpy10]

If you were a science teacher at some stage in life, or every became one, I'll bet the lowest mark in your classes was 90% and every single kid loved you and as an adult looked back on you as the biggest influence on their life and were immensely appreciative of what you did for them. In a world gone more mad than ever before, I'm sure all your adult viewers think they are so much better off for having found your channel and are similarly appreciative for the escape you bring them. Thank you for your significant efforts in doing these Vids.

[@TechIngredients]

Thank you.

[@normellow]

@@TechIngredients I watched Mr Wizard’s World when I was a kid and your show brings me back to those days. Mr Wizard World on steroids of course !

[@CodeCrafted_]

@@TechIngredients Can you make a High-power rocket video about rocket propellent Named ALICE and Other exotic cheap methods to make high-power rocket propellent without using kno3 as an oxizider but water instead? I heard about a method one can use a rocket motor made from 80% sorbitol and 20% sucrose only. Though I am not sure how it works. maybe add some water to it? here is the link for the video that uses the Sorbitol/sucrose rocket motor in the video the guy did not mention the use of a Kno3 oxidizer. URL: kzbin.info/www/bejne/oJyqkH2Cibega5I

[@stoneman9939]

Wow…from Railguns to Rockets. Not only the finished product, but a complete guide on how it is done. Safety first and why you don’t do bone head things. Let the experts do it, but come along for the ride. It is truly a start to finish journey. Well done. Great video production as well!!

[@vipondiu]

2:25 Tech Ingredients is going to teach us how to built our own VA-111 Shkval supercavitating torpedo because, you know, what else are you doing next sunday? Coming soon!

[@dennissorensen8765]

Hahahahhaa!!! Whaling boats, beware. The Rainbow Warrior might be close to getting an upgrade. 🙈😂

[@Nighthawkinlight]

Those are some NICE motors. Great job.

[@bovinespongiformflu]

you too have an epic channel!

[@squiddyjay9000]

Between the two of you, some of the best educational content around. THANKS so much for sharing your own curiosity and wonder with the world. You are legends!!!

[@SeabornNomad]

I second what Rogan says. Seriously, I'm glad KZbin still has some decent content left in it. Please don't stop lol

[@MrBen527]

Very nice!

[@texasslingleadsomtingwong8751]

You were just who I was thinking of while watching this .

[@SeanHodgins]

"Today on Cooking with Tech Ingredients!"

[@TonyAiuto]

"I don't know if I want to mix up 10kgs of rocket fuel in the lab. It's just, .... you know....."

[@xyzconceptsYT]

lol yeah I just grinned from ear to ear when I heard that while stirring my own pot of sorbitol++

[@FriendlyNeighborhoodNitpicker]

Sometimes it just happens.

[@chucklebutt4470]

His inflection was so perfect that everyone understood... the implications... lol

[@dalecomer5951]

RATO: Rocket Assist Towing Option.

[@KD_Puvvadi]

Actually, Indian Military tried rocket assisted take off for their fighter in Himalayan bases. It was in 80 or 90s I guess. Fun fact the guy who lead the program became president of the country. Our beloved Rocket Man.

[@Z-Ack]

Imagine if it were implemented as a trailer emergency assist management system, (teams) that if the trailer got out of control while driving and over corrected causing the infamous death swerves then a rocket shoots off timed with inertia pushing the trailer straight again....

[@patrichausammann]

@@KD_Puvvadi By the way, this is not a new idea. During World War II, the Germans use rockets to launch their jet planes. The reason for this was that aircraft like the Messerschmitt 262 had to be started at full throttle without rocket support, which has extremely shortened the life of the jet engines.

[@wirebrush]

Just the thing for annoying tailgaters too.

[@patrickm3144]

@@KD_Puvvadi pp

[@BalticHomesteaders]

I have no intention of ever making a rocket engine and yet I've watched every video intensly, just in case ... :)

[@BoB-Dobbs_leaning-left]

That is the beauty of KZbin. I no longer have to be a homesteader in the Baltic or make rocket engines. I still, however, have to yell "FOCUS YOU FACK" at my camera and expect my dog to inspect my work.

[@mduckernz]

Iron oxide, or other iron containing compounds like ferrocene, can accelerate the burn rate far in excess of any reduction in particle size of the ammonium perchlorate. The reason is that the rate limiting step is the decomposition of AP to perchloric acid, and this is ultimately limited by the fact that the AP forms a liquid layer on the burning surface, so smaller and smaller particles of AP don't help you past a point. This is why ferrocene can be much more effective than Fe2O3, as the iron it contains can mix in with the molten AP at a molecular level, rather than the molten AP being broken down over the surface of iron oxide particles (and iron containing plasma...)

[@Xfactor7430]

I bow in the dust for you.. thou be übergeek.😎🤘 And if you can run fast as well..you pretty much a certified superhero.

[@leoarc1061]

I love these videos. From the exceptional professionalism, to the amount of complete, precise information, to the father-son collaboration. The latter being, perhaps, the most inspiring, as well as aspiring factor. There are very few KZbin channels (if any other) with such characteristics. That is, primarily, what makes this channel so exceptional. Thank you, for another wonderful video. Best regards from Europe.

[@stumccabe]

Cutting of cardboard tubes: my method is easy and very effective - I use a small pipe cutter with a very sharp cutter wheel and a wooden dowel which fits closely in the cardboard tube to prevent it from being crushed. Works perfectly, quickly and is very safe.

[@yayayayya4731]

Doesn't the pipe cutter leave a ridge

[@stumccabe]

Yaseen Amin . No, but it must have a sharp cutting wheel.

[@yayayayya4731]

@@stumccabe alright thanks

[@bikerfirefarter7280]

Cardboard tube and cutter with an Aluminium pipe-support works. Also followed by polyester-resin, and/or polyester-resin and glass-fiber wrap, etc; surprisingly strong and light. And cast nozzles with 'clay' additives are good. I pre-cast 'thread' in the inside of the ends of the tube, using a tapered threaded pipe nipple as a former when making the tube (use a 'putty'-like filler such as car-body filler). I cast the cores in place using a polished brass rod, with a thin waxed paper wrap over a sugar-paper sleeve; the sugar-paper allows for the contraction of the setting casting, the core rod pulls out and then the sugar-paper peels out by twisting it, and any wax-paper (if it stick) burns away almost instantly on ignition. No 'drilling'. Once set up it's all fast/easy/clean/cheap. Ceramic paper is available but I've not used it, yet.

[@ChrisBurnes]

So James Bond had Q making all his cool gadgets, and Batman had Lucius Fox... What super hero has you out on loan?

[@SSingh-nr8qz]

He is too good for either Marvel or DC these days.

[@Z-Ack]

Captain planet.. he's their hero, gonna take pollution down to zero,..

[@roland985]

Your mum is a superhero.

[@HappyfoxBiz]

Super heroes are broke, he seems like a disgruntled employee of a villain.

[@hygrometer]

on retainer

[@crushboss]

Best show on the net, keep up the great work, because I/we love it!

[@AndySpicer]

The look on your face when that motor fires and the trailer starts moving is fantastic. It really is the little boy in us even at our now more advanced age that drives us to do this stuff. Well done.

[@catvatar]

You guys are living my dream doing science while getting others hooked on it. Love your content.

[@KevinDC5]

Off topic but I just recently built myself some of those flat panel speakers and I must say they sound amazing. Love your work! -Texas🤘🏼🤘🏼

[@lordjaashin]

right? i was very skeptical about them but they absolutely blow my branded book shelf speaker out of the water while costing fraction of the cost. thanks tech ingredients.

[@DullPoints]

That's awesome! I was just looking into that myself.

[@idriwzrd]

I'm in the final stages of building a workshop and the most exciting part is putting up those speakers. The exciters are backordered until the end of July. Must be popular!

[@fantasticphil3863]

@KevinDC5 Ayy, maybe I should finish mine. Been having some simple trouble painting them.

[@AnantYash]

I bought the exciters . They were quite difficulty to get a hold of here in India.

[@BreakingBarriers2DIY]

My admiration is on so many levels for these videos. The thought about what other people would go through and the helpful advice. Just....awesome.

[@damianvdm6527]

Cannot explain how thankful i am for content like this. The freedom with which you give away hard earned knowledge is inspiring. I wish there were more channels and people like this. I am confident that your audience will grow as more people discover your content.

[@ulrichkalber9039]

"imagine to be a youtuber and doing this stuff" well, id say it is "imagine doing whatever is fun for you and making a living on it on youtube"

[@demolitiondavedrillandblast]

That pretty much sums up my job - Blowing up stuff, getting paid for it, putting it on KZbin and getting paid for it a second time!

[@iEnergySupply]

That's what school is supposed to be like.

[@bovinespongiformflu]

loved the response, "Holy Sh!t, Oh my God!" then on replace you can see mach diamonds @ 57:17 ...Nice.

[@macbouncer8525]

good spot... quicker I spotted your comment! :-)

[@xyzconceptsYT]

Bahahaha just said the same thing then saw this comment. Good spotting as well!

[@mozkitolife5437]

I saw them too and freeze-framed them to make sure. Love it.

[@BillPickle]

I thought I saw it for a quick second then went back and checked the frame-by-frame, so cool

[@chrishoesing5455]

Is that the little chain of flame focal points behind the initial cone?

[@Rcking1110]

Well worth the watch. There simply is not a better channel on KZbin.

[@Raletia]

Thank you for the amazing content. I love all that you do. From speakers to rockets to air conditioned computer cooling. I really appreciate the details too, even if I don't understand it all right away, it makes it much more accessible to look things up.

[@TechIngredients]

Sure.

[@PraetzelProjects]

Ah, a long awaited video. A month feels like an eternity. Worth it every time, and an hour long too. Can’t wait to watch this!

[@AaronSchwarz42]

I watch at 2x & using skip 5 button to zoom through faster since he goes at a slow metered rate so that everyone can listen & make sense while others can get the info quickly even with the great detailed information / you can always watch slower a second time if you plan to repeat what you are seeing him do here //

[@PraetzelProjects]

@@AaronSchwarz42 I like his speed, I know much of this, I watch for entertainment.

[@richardperritt]

How is this channel not over 1M subs!? 👍👍👍

[@Marin3r101]

Its extremely technical. They should do shorts to attract more viewers.

[@AtlasReburdened]

That "Circle back" bit gave me a good laugh. I'm glad you don't use it like she does though, since I do eventually want to hear about the composites.

[@ClockworkAvatar]

man, my dad would have loved this channel, he dabbled in so many of the topics you present. kudos.

[@TechIngredients]

Thanks!

[@stupidgenius9738]

"...and if you are stupid..." :D well said when explaining about disposing of potentially dangerous epoxy and other waste. Some lessons just don't sink in, if toned down too much. Unexpectedly made my day :)

[@BartdeBoisblanc]

With Epoxy the lessons may not sink in but they will stick to be sure,lol.

[@marwinthedja5450]

@2:23 You'll probably never hear a man say that he's working on a rocket powered torpedo more casually.

[@nferraro222]

"...nerd-speak, blah-blah, rocket powered torpedo, geek-talk" - it's like Hank Scorpio pops into these videos from time to time:)

[@deeeeeds]

No exaggeration, favorite youtube channel. The fact that content like this is free blows my mind. Also really REALLY appreciate the notes about safety and proper disposal of all materials involved. Too many people gloss over those details and it can be catastrophic, even with something as benign appearing as epoxy.

[@ActionHeinz]

Simply one of the best science channels on KZbin!

[@macbouncer8525]

"you can start your BBQ with these, the smell of chorine goes quite quickly"... LOL, spat coffee all over my keyboard.

[@mduckernz]

He's not kidding though, they really are great for starting BBQs lol, especially if it's a bit rainy.

[@Neumah]

This man just said they're working on torpedoes?? lmao this is why I love this channel

[@Nuovoswiss]

No, not torpedoes, just *underwater rockets*. There's no law against underwater rockets...

[@richardsuckerson49]

@@Nuovoswiss Would you have to register such a device with any agencies or administrations?

[@Nuovoswiss]

@@richardsuckerson49 Only if it was loaded with an explosive payload weighing more than half an ounce (might be a quarter ounce, I forget).

[@niceandlignt]

What's the legality of this rocketry

[@Nuovoswiss]

@@niceandlignt In the US it's 100% legal. There are air space regulations in some places, but those only apply if you're launching them into the air (or above a certain altitude).

[@timsankara7054]

The passion of the teacher & eloquence of delivery are why I am definitely subscribed. Keep up the good work.

[@TechIngredients]

Thanks! We'll do our best.

[@cmldavies]

I can always count on Tech Ingredients for the highest quality content. Thank you for what you do.

[@NainKaigo]

I found when making BATES grains for rocket motors, using a wooden dowel coated in lithium grease worked very well to keep the core surface smooth. You just have to let the propellant cool a little bit before removing the dowel. Having a core guide is also immensely helpful!

[@natalaealluneedis780]

You're the instructor I wish I had for every class I've taken. I love learning while watching you have fun!

[@ikermorell1078]

This is the best most useful and informative channel that exists in the whole platform

[@jbenitez3669]

Seriously love the level of detail put on to these videos... you would think an hour would be long and boring but I was stuck to the screen the whole time! Never even bothered looking at my phone. Keep up the good work!

[@TechIngredients]

Thanks, we will!

[@JustAnotherMaker]

Love ‘em!! I saw how long the video was and couldn’t have been happier. Over an hour with you all is a privilege and a pleasure. Thanks for all the hard work you put in.

[@grn1]

Shit, I didn't realize how long that video actually was. Tech Ingredients is one of the few channels where I find I'm not only highly focused on the content (I'm usually multi-tasking) but can also completely lose track of time.

[@valexalex6187]

I sure could have used you a couple years ago. I was helping my son with a science experiment. We were making rocket engines with household products. I tried adding a little charcoal, thought it would do some good. Luckily we practiced safety. We setup all the lab equipment and the cameras. We had a remote to ignite the rocket. We were behind an earthen hill. When ignited, after about 1/2 second it exploded. Neighbor came running out, the neighborhood started sending emails. I told the neighbor we were trying to make a rocket motor and the nozzle was too small. Wife actually came out and threatened to call the police on me. It was heard a mile away. I took the film, and looked at each frame, and calculated the parts were flying away over 100 MPH. A lot over. It was plastic, and we were shielded by trees. YES , BE SAFE. Not only from the experiment, but from spouse too. It was fun until then. I sure could have used your help.

[@hakachukai]

Best science channel I have ever seen.... and I watch a LOT of science channels! I learn more from your random side comments and explanations than I do from most 15 minute videos here on YT! Please never stop doing this! :-)

[@Degaetus]

The exclamations of joyful amazement at what the host has wrought are infectious. Excellent work.

[@relaxunwind4971]

I would love to see you see up and keep a marine aquarium with high end corals. With your enthusiasm for knowledge and chemistry, and conveying those through youtube I think it would make an amazing long term series.

[@NitePHX]

Gives you an appreciation for how much fuel must be packed into the Shuttle's solid rocket boosters. Insane!

[@kadmow]

lol total booster weight ~84 tonnes - each. - a whole other scale..

[@JoshuaSobel]

@@kadmow That's the weight while empty. 589 metric tons when full! Even harder to comprehend.

[@williamhoward8732]

Really enjoy and appreciate your hard work, clarity and quality of the videos you've created here on KZbin. Thanks

[@ArcticAudioResearch]

When I saw that the length of the video was over 1 hour, I thought I'd write to say that it's too long, and that people won't watch it. By the time I'm writing this, I've finished watching it.... Fascinating stuff!! Great work! Love this channel!

[@emrazum]

Great work as always. I feel like the editing and camerawork have gotten even better, very impressive.

[@danielesilvaggi]

I just love this shit. I would love to feel the energy standing next to it.

[@slrnuttall]

Fantastic job of both teaching and entertaining simultaneously!

[@jomarkde]

Love the new funny arrows post edit. Informative, fun video, worth the wait.

[@dbansgopaul]

Heyy it’s been almost 6 weeks, I got worried when I didn’t see a post for a while. Great video ! Thank you for the best explanations.

[@TechIngredients]

Thanks and your welcome!

[@Haveablessedday820]

@@TechIngredients Can you experiment with thermite mix’s when ever you have time , something I been trying to do but no one has a good video explaining how it works

[@Andy-rq9ni]

man i love this content , for some one that cannot get ahold of this stuff in my country , im looking forward to the hybrid rockets , and maybe in the future watch you guys build a liquid , keep up the great content

[@zaneaussie]

Bloody awesome guys! Love it!!!!

[@mattp422]

Fantastic motors! Really beautiful burns. As usual, your in depth explanations and attention to detail and precision ("neatness counts") make your videos must see viewing for anyone with a love of applied science. Can’t wait for your next one.

[@edwardgrabinsky6369]

On the outro there... seeing the same nitrous solenoids i run on my car plumbed into a rocket engine... hell ya. Nitrous oxide rockets. Thats awesome.

[@DullPoints]

Such a great video! So much good info and good edits. Honestly the only thing missing is some B roll footage or some close up stills of the construction process, but that is more of a nit pick. I really want my niece to watch these vids and dream of being a rocket scientist or engineer.

[@pratikkore7947]

Really appreciate the extra info cards. I know looking it up on the internet is easy but often we plan it for later and never do.

[@MrMancinorosso]

One of my favorite videos you've ever done!

[@codyaimes4354]

These vids remind me of an amped up modern version of Mr. Wizard.

[@tysondeal4369]

Mr Wizard sparked my love for science as a child.

[@Convolutedtubules]

Reminds me of Grant Thompson.

[@tysondeal4369]

@@Convolutedtubules except way smarter. :)

[@Convolutedtubules]

@@tysondeal4369 Both equally dead unfortunately.

[@codyaimes4354]

@@tysondeal4369 mine too. One of the reasons I became an engineer.

[@TigerWalts]

Me: My Trailer is stuck, how will I get it free? Smarter Every Day: Snatchblock! Tech Ingredients: Rockets!

[@2flight]

Another great video as always. Thank you.

[@CriticalTechReviews]

I just wanted to say that you are dad goals and I love your channel. Thanks for all you do

[@charleshanson9467]

Seems like you could fabricate the core tube cutting jig to also be a drill guide. 2 in 1 tool for the home gamer.

[@tbthedozer]

I was thinking something similar but maybe putting a model on thingiverse or something so home DIYers could print it out...

[@Zachmman1997]

Try using a plastic straw with a sealed end. In theory you wouldn’t have to remove it, your igniter would just need to be strong enough to melt through It and light the propellant. Then the straw just burns away

[@MrSpunduckwoo]

Insane thrust!! Awesome video’s!! Thanks for sharing!

[@timkirk3736]

I've been a subscriber and avid watcher for years! Thanks so much for all that you do.

[@yayayayya4731]

This might come off as a little shameless, but can we have an update on these projects: HHO Shaped Charge(I know you still might me making the trench) Different types of composites 13000 watt generator Composite body armour The drone Hydrogen Pulse Detonation Engine Explosive wire

[@jamesburleson1916]

Sad to say, but I think the 13kW generator might have been shelved along with the drone it was for. That said, I fully intend to steal the idea at some point for a man carrying drone type vehicle.

[@yayayayya4731]

@@jamesburleson1916 I have the goddamn same idea

[@hunterjackson802]

A little more transparency or a couple update videos would go along way. Channel is simply to great to be so little trafficked.

[@motosk8er2]

I second this. I wouldnt get your hope's up over the HHO shaped charge thing though. Its probably been shelved permanently over the questionable legality, as well as the fairly low VOD of HHO making a shaped charge almost impossible.

[@yayayayya4731]

@@motosk8er2 they said they were digging a trench, so maybe they'll do it. Maybe they'll not. Idk

[@babylonfive]

Scrape the sides of the cup!! That drove me crazy.

[@mckenziekeith7434]

He did. And he has covered that in previous videos. But they cut out the stirring since it is relatively boring to watch and already a long video.

[@RolandRolfsson]

Just love these rocket videos. Keep it up

[@charleswise5570]

This was just plain cool! Very interesting! Answered many of the questions I had from the previous rocket video. Thank you! Can't wait for the next video!

[@ninefox344]

This feels like the TV show "Mythbusters" went to college, and I love it. Keep it up!

[@dchall8]

If Mythbusters would have ever gone to college, they would have found their myths solved in the problems at the end of the chapters in their mechanical engineering and physics books. Seriously.

[@timvw01]

I clicked like twice, only to notice that it unlikes the video when doing that. So i clicked three times :)

[@mckenziekeith7434]

Interesting. So to like the video you have to click "like" 2N+1 times where N is zero or a positive integer.

[@timrichey9870]

Have always loved rocketry! Really enjoy the comprehensive explanations, I really look forward to seeing your videos

[@proberts34]

Very educational video. Impressive rocket motors. Thanks for posting.

[@DerekWoolverton]

Would have liked to see all the thrust profiles on one graph at the end, or side by side. Also, any significant difference in final weight of the difference mixes?

[@Tony770jr]

I like the idea of the hybrid motor. I've seen the ones running nitrous oxide with a solid fuel. Other than solid fuel there is really no other choice for hobbyists. Cryo it way too complicated. Thanks for the entertaining videos..

[@TechIngredients]

That's next.

[@MrJimmyjammmy]

I think you can use peroxide.

[@NiHaoMike64]

Liquid fuel rockets are definitely practical for the hobbyist.

[@dandan-gf4jk]

​@@TechIngredients Hybrids are the worst of both worlds (at least on hobby scale), once you make the effort to go towards hybrids you might as well try a proper liquid engine, although this probably warrants making a real combustion chamber. There are lots of cheap (to buy and to work with) fuels, many with reasonable boiling point temperatures ex. propane or butane

[@Tony770jr]

@@dandan-gf4jk I'm more referring to cryo fuels like LOX and LH. Not butane or peroxide. They're on the weak side as far as thrust or specific impulse.

[@scottwood1143]

Amazing work. Love the step-by-step walkthroughs!

[@harolddavies1984]

Impressive results. Excellent work.

[@michellmelo9830]

There goes my productivity this morning!

[@shaytal100]

Total impulse should be measured in N*s. You are integrating over the time here right? Also makes sense since N*s = kg * m/s in Si units. This is mass times velocity which is an impulse!

[@jurosmollin7484]

I absolutely love your content. Concepts are made clear and following logically. Please keep these videos coming!

[@Abihef]

Great stuff. Love the quality in the videos everytime too btw

[@crashoverride93637]

How does youtube decide which videos to close caption, I can not think of a better channel to have that service available

[@R.A.M_000]

This question is part humor, part morbid curiosity, and partly legal...how many of those things can you fire off at the same time before people in suits show up? I know in previous video's you mentioned the maximum size a single hobby rocket a person can use in the US was, but could you say set off 10 at once, 100 at once legally? Because if so, I'd like to see that trailer fly :P (assuming it's even possible to do it safely lol)

[@petevenuti7355]

I would guess 2, that is two per rocket, basin that on the following;. "Any model rocket using a single motor greater than 160 Newton-seconds of total impulse, or multiple motors with a total thrust of 320 Newton-seconds, is propelled by a combination of motors having a total of more than 125 grams (4.4 ounces) of propellant weight, or weighs more than 1500 grams (53 ounces) with motors installed, is classified as a high power rocket under National Fire Protection Association Standard 1127." Of course I don't think there's any law written telling you how many rockets you can strap to your back, ...I mean back of your trailer 😜. Also those are the limits without certification, I expect making a flying trailer might cause you to lose certification. That doesn't mean that for sure but I'm telling you if I was in charge you would!

[@R.A.M_000]

@@petevenuti7355 the fact the language exists in the first place tells me I am claerly NOT the first person to ask the question lol! Thanks for the info!

[@Model_Rockets]

As always "OUTSTANDING" informational and entertaining , thank you so very much, I am awaiting the next one, keep up the great work, Absolutely love your rocket videos.

[@MrRedbeard762]

An excellent instructional video, thank you.

[@GunnyArtG]

Always enjoy your videos but dang there sure a lot of ad breaks these days.

[@AdityaMehendale]

Does the water of crystallization (in sugar or Sorbitol) play any part in further reducing the thermodynamic efficiency of the sugar-based rocket?

[@TechIngredients]

Possibly a little.

[@floodo1]

I really love this channel, 55mins before they get to "using our rockets" from the title ... the rest of youtube is clickbait and these guys drop an hour of knowledge no problem

[@hubrisnaut]

I remember 'grasping' differential pressure propulsion and lift. It was on a late watch admiring the first F-4 Phantom I had ever seen up close (yes, "admiring", it was a record shattering legend in front of me which was being phased out.). The chief in charge came up and asked if I knew how it 'flew'. One of the most memorable conversations of my life ensued... I knew the theories, but to have someone "walk" me through the physics with a real life example actually transformed my conceptions. Please keep up the good work. Enjoying your content, TI

[@dwaynezilla]

The unit for impulse is N·s (says "total impulse = __ N" a lot, ahhaha)

[@miqueaspromontorio3]

Yea, those N's be hella impulsive, bruh.

[@skel3370r]

You probably make the dankest scrambled eggs

[@eliasandrikopoulos]

Fantastic! A real detailed tutorial.

[@thomasdipalma2257]

You were as delighted with the result as we were! Love it.

[@chrism4621]

Just curious, what do your neighbors think of Starbase North?

[@ulrichkalber9039]

if it has its own engine, it is no longer a trailer, or is it?

[@lordjaashin]

its a TruckX

[@ulrichkalber9039]

@@capturedflame more like something new

[@user-zj7zw9fg7v]

@@ulrichkalber9039 It's basically a rocket sled without the rails, because where we're going, we don't need rails.

[@bytesandbikes]

Loving the level of detail in this!

[@Voidroamer]

i cant believe ive watched for a whole hour. i was planning on fast forwarding, but this is so densely packed with interesting info... well done!