TpLink tapo wifi camera windows pc software Download & Install, How to view Tapo camera On PC/Laptop

[@basiceditcocodurian79]

on 4mins of your video, mine is different.. IP address started at the first box.. and at the end after i made my user and password when i click the NEXT it say NO MEDIA ENDPOINT FOUND, can you help me?

[@abbykeilreyes2917]

having the same problem here as well

[@arunsekar6341]

Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. kzbin.info/www/bejne/hGacZmp-lNKal6c

[@arunsekar6341]

@@abbykeilreyes2917 Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. kzbin.info/www/bejne/hGacZmp-lNKal6c

[@namitaawasthi452]

Same problem..... Do you got any solution?

[@leonardopina4015]

Same here! :s

[@alvinbryanvalencia8473]

why its the IP add from your phone is diff from the one you copy on the pc

[@srickard99]

The IP address is unique for each device.

[@tgj1313]

I cannot get it connected, It said, " no media endpoints found". Please advise. Thanks

[@egemencoskun]

it would not unless you are in the same wifi network

[@tgj1313]

@@egemencoskun Thank you for your reply,. No, I was doing the configuration remotely. The camera was on different wifi network as compare to my remote location

[@jagrutisons5086]

perfect... very short and precise solution thanks

[@Techlogics]

You're welcome!

[@eroxrodriguez8185]

Helpfull. I accidently used my internet account instead creating a local account. It wokrs fine. Thanks.

[@melalame9270]

No media endpoints found is what I got when I tried to put the network address, how to fix???

[@marvietalanay5114]

same scenario, what to do please?

[@am10231]

Doesn't work, says no media ends found 😢

[@cathybeltran931]

same here

[@123thedman1]

Excellent job thank you, you made it so easy to follow.

[@slavistoyanov432]

Perfect - exactly what I needed. Thank you for taking the time to make this video!!!

[@PLECOLOCO]

Sir tanong lang po? If halimbawa po di na kailangan ng sd card para ma save yung video po kasi direct na po siya thru hard drive or ssd. Dapat kailangan po ba naka on lang yung pc po para lagi narerecord yung mga past days na dumaan na po? Sana po mapansin po. Salamat

[@mrbotvzla]

Hello thanks for. The video, I can view multi preview panel or only one preview

[@Fugitive292]

Wow, many thanks, it works! I've been trying for a while to do this. You rock!

[@Frostm0urne42o]

"No media endpoints found." i found that my router run on preferred band (2.4Ghz and 5Ghz) mode and that was the problem (maybe your camera and your pc/laptop have the same network but differrent band).

[@samgt1000]

how did you resolve this?

[@swapnild1855]

Very very informative. Pc main recording save kar sakate hai kya ?? Pls reply.

[@ronaldrodriguez8561]

Hi, it will also work even you are in different country? I can also access the camera in my computer like what you can do in Tapo Apps. Thank you.

[@hazhang9435]

Dear Sir, I have a question to ask. When the camera connected to PC via iSpy software, do I need the Internet connection for that? Please advise me. Thanks very much! Looking forward to hearing from you soon.

[@zerefdragneel5767]

If the Camera is inserted microSD card and subscribed Tapo Care, RTSP stream will fail / not going to work.. Is it correct ?

[@robbeehood]

Everithing looks fine until 5:53 and nothing happening after (no camera picture) Camera wirking fine with mobile only

[@KimberlieYParas]

Hi, Can you help please? Its showing an error "No media endpoints found."

[@yesyup3453]

Hello, see what helped me above.

[@sairam.p9836]

@@yesyup3453 bro can you paste it here, we didn't find anything above to see please paste here so that everyone will see it

[@yesyup3453]

@@sairam.p9836 I pasted it twice but it got removed for some reason. Now I'm trying to remember what it was I did. I did add the camera with ONVIF. The first time I typed in the network address I forgot to leave in the ":2020" (without the quotes of course). I think the last thing I did wrong was I used my Tapo username and password rather than create a new one. I'm sorry but that's all that's coming to mind right now. I'm going to watch this dudes video again and if I think of anything else I'll let you know.

[@yesyup3453]

@@sairam.p9836 OK, so I watched it again and I was right.1. I used the ONVIF. 2. make sure you check your app for your I.p. address 3. make sure you leave in the :2020 part in when entering your I.P. address (network address) 4. make sure you create a user name and password to gain access to that I.P. address (don't use your Tapo account info) 5. Make sure your camera is on and connected to your WIFI. 6. Don't attempt this after about 8 beers. Hope it helped. I'm going to be connecting my RING doorbell to ISPY in a couple of days and if anything else comes to mind I'll be back. Good luck.

[@LucasFreitasPT]

​@@yesyup3453 Thank you so much, i was struggling... i forgot the "2020" part

[@Kage0No0Tenshi]

If I understand right, I can be at home on my main PC and recording my work place if I make a acc and have ip adress on my work place?

[@WildVanWild]

Is this for all TAPO ip cameras, including the TP-Link TAPO C310?

[@jjonson]

hello I would need to watch the stream from the camera TP link directly in the web browser if I want to watch the stream on PC I normally use VLC player but I would like to use a bookmark in my mozilla firefox it seems more convenient to me

[@shah_28]

dose it work on TP-LINK Tapo C210 Pan/Tilt Home Security Wi-Fi Camera, cos i have same issue NO MEDIA ENDPOINTS FOUND

[@beevo5359]

When i click next, a box is show: nó media endpoints found! What's error? My cam is tapo c310 When i check again i found the problem, and fixed it. My pass not correct

[@Techlogics]

Create new account / Edit Onvif password then try again

[@arunsekar6341]

Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. kzbin.info/www/bejne/hGacZmp-lNKal6c

[@stevepliakos3339]

I'm looking for some help pls.. I have the 2.4Ghz network. Now what do I do next so I could use on my pc windows 11??

[@francisjadeplaris2054]

my camera wont work,,i follw the instruction but wont work

[@brendandax]

Not mamking progress here - when i download and click the exe file, it's opening in a browser window? instead of a standalone application???

[@246ETpHoneHome]

OPEN_INPUT: Invalid data found when processing input.. what this mean ?

[@manojamyp729]

I think this for local view only ,is there any solution to view remotely,i think we need staticip for remote view correct me if it's worng

[@azka-lyrics]

I think so. And I've been trying to figure out how to stream Tapo camera remotely on different network, let's say on my mobile phone or laptop away from home. None of the videos in YT provide such a solution.

[@allexcao3029]

excuss me, can tapo D230S1 be connected to ispy ??

[@alxdukextars2620]

Hello, can you see it in real time, monitor it in real time without having to pay for extra or special functions? I mean, it is already included in real time by default?

[@Manuqtix.Manuqtix]

No media endpoint found?

[@ildkanonen]

My tapo camera is only able to use the 2.4ghz wifi band, and therefor I can't add it to Ispy, as I'm only able to use the 5ghz band on my pc. Is there any way I can add the camera to Ispy regurdless of me not being on the same wifi band on pc and camera?

[@perastruplaustsen]

Does not work for mee - 2 red wires in the upper right corner

[@sandeelacerna7292]

not working on Tapo C310

[@nokeep6087]

how to do this with different wifi? i wanna see my office from my pc at home

[@tatuananh8612]

Hi help me No media endpoints found

[@arunsekar6341]

Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. kzbin.info/www/bejne/hGacZmp-lNKal6c

[@user-wc6oz3gs1l]

FOR THE NO "MEDIA ENDPOINT FOUND PROBLEM" TRY TO PUT THE ( :2020 ) AFTER THE IP ADDRESS TO CONTINUE. NOT :2021/:2022/:2023/:2024 xxx

[@asadfirozmasti8]

i have one question how can i connect in android tv in this camera

[@adrianscadding395]

hi i have followed the instructions to the letter but I am unable to access the cameras? Keeps coming up NO MEDIA ENDPOINTS FOUND

[@shah_28]

yes me too, what are the missing step

[@shah_28]

dose it work on TP-LINK Tapo C210 Pan/Tilt Home Security Wi-Fi Camera, cos i have same issue NO MEDIA ENDPOINTS FOUND

[@rec-trick]

i can use pato c100 with iriun camera app ?

[@Seteberto]

How do I configure the tapo c200 with a IP in another WIFI?

[@user-jh7dd7sq1z]

Excellent job my guy,you got a subscribe from me and i wish you the best for you and for your family

[@muhammadizzuddin1844]

is it have to remove sd card from camera so that we can perform this cctv on computer?

[@RobNP1960]

Thank you for the tips. Here everything works perfectly.

[@Techlogics]

Great to hear!

[@antonioperezsemyonova6875]

Can I enable motion tracking with this pc software on my tapo camera??

[@drewrivera5500]

Hi! Its not working for me since I am not connected on the same network with the camera. Currently located here in the Middle East and my camera is in the Phils.

[@user-wd7fy2vk1c]

same issue. is it working now for you? how did you do it?

[@souviksamanta8938]

I did not found the IP address on C420 model cameras

[@Techlogics]

You may try this way : kzbin.info/www/bejne/aYOxfaqArbKgb7M

[@yoshikong6246]

There is a issue encounter (no media endpoints found) after I key in the Network address. I had found some suggestions from reddit, but ist's not work at all. Any suggestions to solve this issue?

[@sauplink7975]

set static IP on your router for each camera. That should work.

[@cyrilsilvestre5180]

add " :2020 " at the end of the ipaddress, i tried that and it worked

[@jurajvasko3880]

can some one help me? ..cannot start the wifi on camera with my phone ...i find the signal from camera ..if i click ..cannot connect..if i use lan cable ..its work ...any help?

[@simonesilva854]

A camera precisa está na mesma rede?

[@AnimegurlySlayssss]

Bakit po kaya di makita ung mismong IP address nung camera. Using po TAPO C310 ung model ng akin.

[@DailyGee360]

Working! 2022 Feb 25

[@sichin92]

this is the outdated version for the ispy.. did anyone have the updated version?

[@ms2504]

Thanks Really Helpful.

[@r.gonzales8586]

It worked at first, but after I tried to reboot the camera, the network address does not automatically populate anymore. Even i put the correct ISP address, giving me the error no media endpoint found. I tried creating a new camera account, didn't work to.

[@Techlogics]

From the Tapo App camera is working / Not?

[@r.gonzales8586]

@@Techlogics no issues with the app and camera. The issue is with ispy. It's not automatically registering my IP address and it's giving me the error message even if I typed it right.

[@arunsekar6341]

Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. kzbin.info/www/bejne/hGacZmp-lNKal6c

[@sauplink7975]

you probably have DHCP on you camera. IP would of changed. Or else set static IP on your router for each camera. Then no issues if camera gets updates/reboots etc.

[@KeeyPie]

hello how to fix if it says no media endpoints? pls helpp

[@trendeverything3623]

no display just black how to fix?

[@prasnandaekorahmadi418]

I have 3 Tapo cameras and connect to iSpy. 2 of them can run well, but 1 camera can't run and it says "No media endpoints found". Anyone know the problem?

[@emperpremium8429]

same here

[@arunsekar6341]

Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. kzbin.info/www/bejne/hGacZmp-lNKal6c

[@voodas]

What if we want watching remotely? I mean from another IP

[@abelremark7446]

That's exactly the relevant question, this is just silly.

[@leandroaraujo87]

Where do i find the network adress on may webcam?

[@marckgag]

In my cam, have a alert : "No media endepoints found"

[@akashmodak2397]

It worked 1month ago. But now facing issue to connect sine 5days. Please help.

[@Techlogics]

May be camera IP changed, check the camera IP address from mobile & Reconfigure to software again

[@pt.skmetalindo2573]

very nice thank you

[@secondlife8899]

Thanks.... great job. Saludos desde España!

[@raidenkeithsisonhonra8499]

No media endpoints found

[@illayaraja37]

My tapo C200 is locked with ACT fibernet how to unlock it? Can I get the latest version of firmware of tapo C200?

[@Techlogics]

Reset button available on the camera, you can Reset & configure with new WIFI

[@vincentoro5008]

no reception all black this doesnt work at all

[@sonuarora7593]

Its showing no media endpoints found

[@yesyup3453]

Hi, see what helped me above.

[@zidliym9702]

I had the same problem and i think i have the solution step 1: Dont forget to camera settings -> advanced settings -> camera account -> and fill in your username/password Step 2: Do step 1 to all your camera's or else the ISpy can not register them. So fill seperetly your username/password for each camera. after i did this all my 4 camera's worked

[@germantorre9649]

@@yesyup3453 Same problem here! No media endpoints found. Got username and password. Next to my IP Address i put ":2020" (without the " "), also withoput :2020 and nothing. Help!

[@shirleysimpelo8367]

@@germantorre9649 Successful. Thanks. Need to put :2020 after the ipaddress

[@arunsekar6341]

Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. kzbin.info/www/bejne/hGacZmp-lNKal6c

[@leonardopina4015]

Hey! thanks for the infos, but there's a "no media endpoints found". What should I do?

[@CartanaPoker]

me too

[@user-ef3zl7gp1w]

me too...

[@cyrilsilvestre5180]

add " :2020 " at the end of the ipaddress, i tried that and it worked

[@cyrilsilvestre5180]

@@user-ef3zl7gp1w add " :2020 " at the end of the ipaddress, i tried that and it worked

[@cyrilsilvestre5180]

@@CartanaPoker add " :2020 " at the end of the ipaddress, i tried that and it worked

[@TheDiabeticWay]

Brillant! Thank you!

[@user-lc3xw4ys4b]

Is the iSpy safe? I' am afraid of security

[@ChandraSekharUppalapati]

no media endpoint found absolute waste of time

[@NoName70707]

"no media endpoints found" not worked

Some here.

[@supersaIAN333]

Nice! Thanks for this!

Thank you so muchh! it works!

[@kayeagustinVLOG]

not working on my tapo c200

[@Techlogics]

You can try this software also : kzbin.info/www/bejne/aYOxfaqArbKgb7Msi=NueKzkHAL32IVJ7m

[@suriantosuband9727]

super thanks!

[@hariprasadsv3567]

How to download & share the recording from the SD card part or full directly from mobile app without removing Memory Card from camera & share it on whatsapp.. ??

[@vadimtres]

Hey! Have you found a way to do this?

[@matejdevinar]

Most probably the PC and the camera must be on the same network, otherwise it doesn't work??

[@kelvinambrosio8336]

I have the same doubt

[@mcleovenbernasor2151]

i'd add another camera but then it doesnt working

[@michelleesperal]

I'm getting error "No media endpoints found" though I entered correct IP address

[@arunsekar6341]

For me also same error, Did you fix that error?

[@arunsekar6341]

Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. kzbin.info/www/bejne/hGacZmp-lNKal6c

[@ricciogamboa150]

not working on tapo c100! no media endpoints

[@arunsekar6341]

Please watch this video and fix your issues, I too faced this issue earlier and now its working good after installing this app. kzbin.info/www/bejne/hGacZmp-lNKal6c

[@starshine_Ultra]

Can you make a version of tplink tappo with freenas?

[@Techlogics]

We will try and let you know, Also the Imou NVR will do that job kzbin.info/www/bejne/sJjMaqpjeq2JacU

[@hazhang9435]

Thanks you, Sir! 👍👍👍

[@michaelalfonso8370]

To lag and frameloss on my hp laptop

[@doobresick]

very helpful, thanks very much.. have you also used cloud storage option.??

[@Techlogics]

Not tried

[@rodjasonordinario9576]

@@Techlogics good pm. i got a questions hope you can help. here is the scenario i use wifi repeater on my two tapo camera, but my PC is connected thru LAN cable on modem. I got "no media endpoints found". how can i fix this? thanks

[@noriemaelaude90]

thank you very much its working

[@VictorVoon_VicVoon]

Hi thank you for the video, I try to follow your video but all i get is "No media endpoints found" dialogue box.

[@sc.4985]

do you have solution about that?

[@VictorVoon_VicVoon]

@@sc.4985 No that is why i asked hopeful there is a solution. :)

[@sc.4985]

@@VictorVoon_VicVoon well I trie conected from my own network and all is fine, but when I use a wifi from my work not works, maybe trie use another IP direction or other software

[@VictorVoon_VicVoon]

@@sc.4985 Huh I see ok ok thank you. I will try this at home and see what happen.. Thank you again for your advise.

[@myjoyfulcanvas]

Superb... thank you!

[@Techlogics]

Thank you too!

[@baluchon2505]

Thank you so much

[@naveensati110]

Done now. Thanks a lot

[@saicoso]

THANK YOU!

[@bopepmoore3762]

Perfectly Great! ❤💯

[@Nay_atelie]

Deu muito certo. Obrigada!

[@ibernard2]

I just use the M1 iphone app thingy

[@gauravswain6907]

Thank you

[@michaelkeon3215]

Thank you!!

[@ChiefJoeOnline]

mine doesnt pick up my camera, ive done all the steps exactly

[@Techlogics]

Hi, You can try this software also. kzbin.info/www/bejne/aYOxfaqArbKgb7M

[@mohammadobydullah6605]

Is it safe?

[@Victorlacqua]

Can you help me? If i pay for you, you put the cameras on for me? I'm from Brazil and I am not getting

[@Techlogics]

Hi, Better you can buy from your country CCTV dealers only, because of warranty/service claim.