Is the Magbak Elite For The iPhone 16 Pro Max Worth It?!

[@riaseamor]

video lengths are perfect in my opinion. too many reviewers now do quick snappy videos with a billion jump cuts. I prefer your style my man keep doing you!

[@TechnicallyTee]

Thanks I appreciate that! I know I can ramble sometimes and I’m going to try to make it quicker.

[@DavidDeLeon]

Wish I would of seen this video and comment before I dished out almost 100 on one

[@sumeetlal1]

Been rocking this Elite case for about a month now. Love the slim profile, super snug fit, and grippy sides. Kinda makes me feel like I’m holding a silicone case without all the lints dirt etc on it. It’s a okay case, feels cheaply made. The case is not 100%, ran into some issues. Such as at times using the finger loop, it’ll pop out or if you pull it too hard. I use the 3 in 1 standing MagSafe charger, and sometimes it’s very hard to line up the magnets on the case to the MagSafe charger where it doesn’t keep dropping my phone down, gets kinda annoying during night time. I guess that’s because the silicone finger loop is on top of the MagSafe magnets here in the way at times. Another issue is when you take out your phone from the case to clean and wipe it down.. the camera ring always pops out or even sometimes while inserting your phone into the case, gets pretty annoying. I wouldn’t re purchase this case again.

[@RayDaManX]

Thanks for this feedback. Helped me make my decision. I don’t want to deal with any issues getting on charger.

[@bobbywhite7088]

I got this case because I liked it on my 12PM. It mounts great on my forklift at work and it fell from almost 6ft on concrete when I knocked it off with my hand and it protected the phone well. The MagSafe connection is fine for charging and my car mount. I like the rounded back and the finger loop makes it easier to hold in bed but I don’t feel like there’s enough extras to warrant the increased price. The old cases ran $55 so I chalked up the extra money to the screen protector. This is my usual daily and I swap with the Andar Aspen which I like but doesn’t feel too protective on off days.

[@gvsly2008]

Thanks for the review. I almost bought this case (and/or the standard magbak case). I assumed the magsafe strength would be rock solid but you showed me otherwise. The case looks cheap and holds on to fingerprints more than I would like. The search continues. Happy Holidays!

[@edcevo3052]

The mangnet bar it came with has a sticky back to stick somewhere in ur car or wherever and it holds ur phone. It's a car mount for ur phone

[@SalsaBailaProductions]

Whats your top 3… great protection, not too bulky and great feel

[@rockhard121283]

Finally. Was waiting for this Review 😁

[@TechnicallyTee]

💪🏽💪🏽💪🏽

[@clifffalgout9630]

When are you dropping that dbrand review?

[@iMustPandaLean]

Nice 👍🏾 When are we getting the SupCase line reviews? MagStand, UBGrip, etc.

[@nestor9598]

Are you gonna test the Rokform?

[@renwalter3232]

Thank you for being so honest. The fingerprints drive me insane.

[@tamimihasan3687]

Where do you get the Wallpaper 😊

[@George-f2u3g]

Would you chose that case over the Caudabe case ???

[@TechnicallyTee]

Nah I would easily choose a Caudabe case, any of them over this. Personal preference and I think it’s overpriced.

[@ScubaSteve23]

Just bought this case before watching this review and instantly put it back in the box to return. Camera lip is very minimal I use my own privacy screen protector and this case would not fit with it without making my screen lift up. Which means they require a very thin screen protector hence the reason they include one. Caudabe sheath all day over this

[@jrod332383]

I like the case , but the finger prints on the case are no good . I hate when the finger prints show like that. I had the original version and that was the problem with it: I was hoping on this new case they would change the back of it to a different kind of material so the finger prints wouldn’t show. This is super deal breaker. I was hoping they would change the back of it like the back of the OtterBox symmetry feel hard plastic but smooth and no finger prints whatsoever .

[@DavidMoreno-rd4rw]

First! I’m rocking the dune bullstrap and have the ringke fusion x camo on the way and I may have to get this magbak just cus you have it lol

[@TechnicallyTee]

Haha watch the video first and see if it’s for you.

[@jeffhale1189]

Thanks for sharing. Blessings

[@Fortunex7]

I got it for $50 after tax, cannot complain honestly, could’ve gotten the dbrand for $35 but I like this a bit better for the extra functions

[@Kjk-lb1ox]

I got a white one…. Looked dirty out of the box….kickstand is garbage and the feel of the material is not nice in my opinion

[@dillsnufus]

That extra magnet is for you to put in your car or any place that isn’t magnetic that you would want to slap the phone onto. Not a replacement

[@TechnicallyTee]

Thanks!

[@hunterridley73]

Actually I don't mind if it's a little long I think 20 minutes should be the max if you do go long

[@ZensōMusic]

The MacGyver Signature Model. 😉

[@TechnicallyTee]

Right lol

[@RayDaManX]

Most of the reviewers for this have a %15 off coupon via Magbak, would a %15 savings change your mind on the case?

[@linhunnicutt6556]

I am on my second my back elite, and I will not buy another one. The first one I ordered the camera ring was off of the case when I pulled it out of the box I had a temporary workaround, but I could not get it back into the case correctly without it falling out. After a lot of back-and-forth with mag's customer service, they replaced it, but when I open the box, the camera ring was not installed correctly and I cannot get it back in, even though there is a workaround. I think this case is overpriced, even though it's a good case and I will not buy another elite. I'm not exactly thrilled with mags Customer Service because I found them a bit difficult to work with And that is sad because the classic is a good case, but I would not spend another $80 on the late case at all. I think if you want a mag bat case by the Class. Case period.

[@TechnicallyTee]

That’s good to know and yeah I do think it’s slightly overpriced. I can see $60 but not $80.

[@linhunnicutt6556]

@@TechnicallyTee I just purchased the classic and got it in this week. It is a much better case for the money than the elite. The fit and feel are phenomenal and it's the same material and almost similar style to the elite but it's $55 instead of $80 and I think it is much better price wise for what you get. as I said in my earlier comment. I will not be buying another elite and I was very disappointed in mag back Customer Service, it was like pulling teeth when I compare them to nomad, Kobe and Andor.

[@Mehbymeh]

Trust me, not worth it.

[@TongueJedi]

Meh, I see the case being pushed all over. Nice features just not implemented well.

[@craigt-ERP]

Love it Tee - I stuck with the 15 pro max but still love the videos!

[@TechnicallyTee]

I appreciate that support! 💪🏽💪🏽

[@theodorepullins3124]

I’M FEELING THE CASE……… BUT THE PRICE 😳………

[@murtazachaudhary3339]

Nice video

[@GhostDog54]

Just tell me what I want to know early. Read my mind Tee😂😂😂

[@TrexxArmz]

Just got this case a week ago. 😂 I love it. Have a Quadlock for my bike, but it’s getting cold here, so I wanted this for winter.

[@MOKARDZ786]

Not worth 80 for this, 60 better

[@sglatitude]

Let’s go 🎉

[@TechnicallyTee]

My guy 💪🏽💪🏽💪🏽

[@joeshaughnessy2472]

I’ve been using this case for a week plus and mine is no where near that greasy… you eating cheetos before the review or something?

[@TechnicallyTee]

Nope not at all. It collects fingerprints very easily. I make sure to clean my hands before every video.

[@joeshaughnessy2472]

@ interesting. I haven’t had this experience with the case. And I can’t stand my phone looking like a grease pit so I was afraid it would be the case.

[@guddoguddo]

Mine is on the way 🥹