Robert discusses the top common error messages and how to correct them.
Пікірлер: 18
@BarbAlexander175 ай бұрын
You're a lifesaver! Thank you.
@Patty1of4 Жыл бұрын
I am so surprised that this worked! I was dying and I sure didn't think that something this simple could fix my machine! I am blown away! And I am so grateful!
@bhbformoso13 жыл бұрын
OHmygosh, thank you so much. I spent two hours searching the web and calling dealers and you are the ONLY one who gave me this simple solution. There are so many little “secret” fixes on this machine for what feel like fatal errors. Thank you again for your reassuring comments.
@tass17754 жыл бұрын
Make sure your bobbin case and the silver case are attached to the magnet, I always have this problem when I clean the bobbin area and this has always resolved the problem.
@evelynellison85155 ай бұрын
I am getting an error message on my 790 pro as soon as I turn my machine on. It’s a green mat (fabric?) under the foot. The mat thickens changes, and the foot goes up and down. What the heck does this mean? The only way to get past it is to turn my machine off and back on an again. If I X out of it, it comes right back.
@darbyrd35394 жыл бұрын
Thank you so much. That worked on my bernina
@lauraokruhlik43224 жыл бұрын
huge fan of you and sew special!
@alison5072 Жыл бұрын
Do you know why I’m getting the error message “Embroidery module is updating. Do not remove module.
@gilliganberry3 жыл бұрын
Same issue. What I found was that the hand wheel wouldn't turn. so I wondered if it would turn without the hook and race. I removed them and gingerly turned the hand wheel, and it turned properly. So I restarted the machine without the hook and race and all was well. Replaced the hook and race and, again gingerly, sewed a test line. Now working. Hope this helps.
@loiscallahan23263 жыл бұрын
Thank you! It worked.
@user-gq6oc7mj8h4 ай бұрын
How about error #2010 on Q20 sit down?
@sueboyle43244 жыл бұрын
I got the 1010 error message and I tried snapping the thread cutter and restarting but nothing! I also took out bobbin case and made sure all was good the and nothing! Any other ideas?
@beckycaskey9434 жыл бұрын
and so how do you resolve the "gear of life" issue
@quiltingembroidery2416 Жыл бұрын
I have Bernina 790 plus. I have 2 issues. 1. Bernina presser foot is not going up and down if use the button. But if use the rod to move with the leg it is working. 2. My black bobbin outer steel cover is cut. Please 🙏 help in this regard. I am from India
@beckycaskey9434 жыл бұрын
I am getting "error#1100 could not lock hook-check hook system" HELP PLEASE
@pamelaliston43524 жыл бұрын
When I see Error 1010, it usually means ‘you forgot to close the bobbin door.......again. Sigh”
@lifestylesew3 жыл бұрын
1010 message did not clear after I snapped it down and restarted
@sewspecialquilts3 жыл бұрын
It may be time to pull out the bobbin, bobbin case and race to make sure you don’t have any threads stuck behind the race.