Tecware Forge M Unboxing and Quick Review - Meshify C mini Alternative!

[@TechBroll]

Thank you for watching, you can get this from the link below: 🛒 BUY IT AT LAZADA 👉 bit.ly/3f6oXpE

[@jinnchinothenoobking8289]

Wala na stock ):

[@chox3n1]

How do you not have 50k subs? c'mon guys. His channel is so underrated. did you see those beautiful brolls? reminds me so much of hardwarecanucks

[@Tekillyah]

That was inspired :)

[@ZAR556]

imo, - Front panel is FineMesh so it can filter dust - you can put 2 fans on PSU cover too, since bottom case have full-size dust filter heck, this case is hidden gem Much more better than many branded case

[@shunin2423]

Finally! Dumating na talaga ang case na to. I've been waiting for someone to review this case since it looks cool based from the mesh design on the front. Now all I need is money to buy this haha. Once again sir marvin, great job on reviewing the products with more in depth reviews and even more great editing and b rolls

[@lonrea2886]

you can really say "Bang for the Buck" with this case! i love mine!

[@sergsergesrgergseg]

does it come with a fan hub?

[@lonrea2886]

@@sergsergesrgergseg yes it does have fan and rgb hub!

[@sergsergesrgergseg]

@@lonrea2886 what about the non rgb version? does that come with a fan hub?

[@lonrea2886]

@@sergsergesrgergseg that i dont know cause i bought the rgb one

[@WanBerry]

xcuse me,can tu tell me about your CPU and GPU temperature..?

[@tedtalens788]

What are the real dimensions of the case? The box and voice at 0:50 says L340xW205xH412 while the specs at 1:27 says it's L400xW200xH425.

[@sergsergesrgergseg]

i bought the non rgb version and for whoever is wondering, all the fans connect to one little pcb, then you plug that into your power supply. the fans are pretty quiet and when you have headphones on you can’t hear it

[@Hus891]

Are u able to control it in the bios

[@williamabaiz7514]

Top notch ang shots, editing at yung pagkaka explain ng bawat parts ng case na yan ah. Galing!

[@beesong2450]

I got the very same one. It looks badass without rgb 👌👌👌

[@Roxiccccc]

Dude, good review, I hope you get more subs and more review content to come!

[@strahl_licht]

Your review is really helpful. I like how you point out and measure the dimension and its features. Thank you.

[@anakteteng7143]

have you tried to install a triple fans GPU? Does it fitted to the case? i am wondering about the actual clearance for GPU mounting. Does it require to remove 1 front fan to install triple fan GPU's?

[@lamester]

is it possible to mount a 360 radiator in front? i.e ID Cooling Auraflow X 360?

[@kevinlim7974]

thanks for the quick review! Very informative! I was wondering if you think it's possible to mount a 240mm radiator in front, together with 2 x 120mm fans behind in, so the radiator has a push-pull fan configuration. My GPU is not super long. Should not intrude into the space occupied by the radiator.

[@mutangbaru]

thanks for the review. really helped me a lot. some youtuber doesn't really put attention to the back panel section especially the clearance for cable routing and management. thanks man and thumbs up for this amazing video.

[@HardwareVoyage]

Panalo yung intro bro! 👏👏👏

[@jeffkuzzen]

How much space for an AIO cooler in the top? Im wondering if the thick arctic liquid freezer 2 240mm would fit in the top, without hitting the motherboard

[@mohdazriabdrazak7667]

hye is this the best budget airflow case? looking for one

[@cptwhite]

Superb overview mate, many thanks from the UK :)

[@MrTMP007]

Auto watch even though i have no plans changing my case. Excellent review as always!

[@MinorVoices]

Nice review! quick question, if you put an aio radiator on top and the fans on push position, is it better to keep the dust filter on or just take it off for better air flow? Thanks!

[@qwerty19811]

Is the back cable management space deeper than the Nexus M?

[@giepocs88]

You really make good videos in your channel, keep it up Sir! Sana mas dumami pa subscribers.

[@aeroxtreme15]

Can the pcie slot be removed without being cutout? I'm planning to build a gaming/workstation pc using this case and might do a vertical gpu.

[@xuxipan7181]

This or the dlm21 mesh because both are similar? Which is better overall esp which has more easier to remove front mesh panel?

[@senexiar]

I was gonna pick dlm21 mesh for my pc but i think im gonna go with this one.. It has free argb fans and also no big logo. Also cause it looks a little better, i prefer the glass covering the whole side

[@law2xoliver]

definitely looks like a fractal design meshify matx. pero kaka release lng rin ng tecware void M which actually looks good and has rubber grommets. this probably has better thermals than the void m but im worried about dust and if maka hold up ba front mesh. kudos for tecware though for providing budget cases.

[@iamyourrealfatherkid]

im trying to build using this case + 224 id cooling too.. did you managed to make the video?

[@auqjqnwhau]

What if your motherboard doesn’t support 5v 3 pin rgb adapter?Is there any way to power the rgb for the fans?

[@zuhairi4200]

Can you recommend me matx casing with similar price that include front dust filter

[@saintient]

DIY it's cheap. Get dust filter and magnetic tape

[@rey206]

dust filter is very cheap

[@taikiat]

Vega M from Tecware

[@vetold85]

Aerocool Aero One Mini

[@rosh7379]

Very detailed video, Subscribed and liked thank you :)

[@alonsogabriel9336]

How is the paintjob? Is it fine or rough like old rakk cases? (My rakk case had ugly rough paint which rusted after just 3 months)

[@LawAbidingSociopath69]

any answers bro did u buy them?

[@NasmanFour20]

Hi does it support 140mm fans for front intake? Salamat!

[@frhn707]

I wanna buy the normal atx variant but its not available in my country yet :/

[@10BrutalityGaming90]

mid tower case with easy remove mesh filter on front?

[@ivanjencabo2710]

Can we install a 280mm radiator in front? Thank you

[@nattttt212]

Grabe yun case, ang ganda. May 4 na fans na kasama. Instant buy ito sa akin

[@gregorycaliwag9343]

What rgb fans can be synced with this case? using asus prime b450m-a

[@siomaiethan]

where do you plug the fans hub?

[@pesto9469]

Is the front mesh made of steel/metal or plastic?

[@jeromalan7251]

Can We put 3070ti here with 3fan? I mean will it fit

[@icemann1977]

sir please create a build for this so that we can know the thermals.

[@_salvo234_]

small update : if you do remove your front i/o and only leave the power button, you can mount a 360mm radiator in the front, however, then you can only mount a 30-31cm GPU, not a 34cm one

[@ayie393]

Not even 32cm ?

[@_salvo234_]

@@ayie393 you can try,but it'd be an hard fit

[@bryanadante]

Gaano kakapal tempered glass niya bro? 4mm? or 3mm lang din like DLM21 Mesh? TIA

[@RaafiMMatin]

Forge M vs Nexus M or Cougar MG-120?

[@araisikewai]

From maximum airflow point of view, I will rank Forge M (full front mesh), then Nexus M (solid front, airflow turning 90 deg once to enter case), then Cougar (solid front, airflow turning 90 twice to enter case)

[@codotsixty4186]

is noctua nh d15 can fit in this case?

[@jeffjularbal9404]

Why no rubber grommets Tecware?!? Why??? Nice case BTW. Nice review sir. Aprreciate the work. Keep it up!

[@hcaps3129]

Why do the specs say it has 7 pci expansion slots but the case only has 4

[@maddymuhat8079]

Bro ask ko lang hindi ba compatible ang ibang brand ng fans dito dahil sa hub niya? Balak ko mag add kasi nf two fans sa top. Salamat.

[@caramelosanto1358]

Gracias a ti pude remover el panel frontal, no sabía cómo hacerlo, y tenía miedo de romperlo, muchas gracias xdd

[@SHIN-mc5ex]

Im using fractal design define mini c right now, and im very satisfy with the build quality and features. Excellent and amazing. i also build with tecware nexus m for 2 times already, compare the build quality and features are really different. but its understable because of the price. tecware case is good for someone looking for budget build, build quality standard, Very tight cable management, lightweight. I will not recommend tecware case for high end pc users. I will prefer fractal design meshify mini c

[@Humanoid38]

3:42 how do you mount the SSD to that area?

[@saintient]

At front 4:33

[@JD_1992]

You actually don’t have to take the the screws off the bottom to get the mesh grill out.

[@reynaldosagun2537]

Pano maikakabit yung screw nito sir? sa likod? di ba mahirap sa bandang ibaba?

[@akiheronariz8443]

Good day sir. Kasya kaya dito yung aorus master rtx 3070?

[@Borri03]

can i put there a a320m anda a rx5500xt?

[@ABG0]

Sir marvs, pwede ba 140mm fan sa front?!

[@TEMARTZ]

im using him big brother... TECWARE FORGE with 200mm fans... its a CM h500 substitute

[@robbieparinas3061]

sir compatible ba yung forge m argb sa motheboard na gigabyte a320m s2h v2? maiiba-iba ko rin ba ang kulahy nun??

[@lonrea2886]

Tanong lang... kasya ba dito ang mga full size gpu like rtx strix with 3x fan?

[@changonzales18]

Like muna bago nood. Kudos!

[@pumpkinsdrown]

kasya po kaya yung rtx 40 series dito ? specifically ASUS TUF Gaming GeForce RTX™ 4070 12GB GDDR6X OC ?

[@Kim-qc9pz]

Hello. Ask ko lng po kung ggana ung argb fans sa b450 aorus m motherboard? Newbie lng po 😅

[@smokegames1179]

pano po tangaling yung sa harap na mesh

[@H3iqal]

Will it fit a triple fan gpu?

[@ethangabriellesara8001]

Hit like before watching Let's get in to it! 🔥🔥

[@alpineassault]

Ano yung mga case wires? Bakit parang may kasamang kakaiba?

[@maddymuhat8079]

Kasya ba yung id cooling se224 argb v2 na air cpu cooler dito

[@Lyander25]

So this looks a lot like a Fractal but with more free fans, haha. Nice. The PSU length accommodation is fine but will it be able to house 170mm WIDTH power supplies? Asking so I don't waste money and time picking this up only to find it won't work. Thanks for the vid!

[@evictus8173]

Not a huge fan of case with psu shroud that exposes psu, exposing psu loses the purpose of hiding it imo. But it's pretty good price :)

[@BeyondSavage]

Reattachable ba yung pcie slot cover

[@ItssMitch]

Will this be available in the UK?

[@CrimsonFukrr]

It’s available at scan if you’re still looking.. :)

[@henryt9835]

@@CrimsonFukrr yes indeed

[@kirbeytecson1121]

ala lng rubber grommets ☹️

[@kennyd7667]

Man what great looking mATX case, if only it was available in the Uk

[@CrimsonFukrr]

It’s available at scan if you’re still looking for one.. :)

[@frhn707]

Can atx mobo fits in this?

[@akkad7514]

How is the build quality? is it solid or flimsy?

[@flynnrider4080]

hi sir kasya ba msi mpg b550 gaming plus dito sa case?

[@NikStrengthCoach]

Are the fans loud or quiet?

[@ITRY01]

ganda ng forge m, lalo na siguro yung may arc spectrum na forge m

[@joshandevera4544]

Di naalis yung tempered glass side panel?

[@arielbaste7123]

Is there a way na tanggalin ung mismong front mesh from the front panel frame? Balak ko bumili tas repaint into white since walang available na white variant nito(as of yet).

[@27carloyu]

may release daw this july hehehe

[@icerexiomo6987]

Yan case ko ngayon. Love it.

[@chi.6474]

pwede pong palitan yung 3 fans sa harap po diba?

[@kylegilo3421]

molex po ba ang built in fans nito?

[@hirameku5745]

This or tecware alpha tg?

[@georgechoo9344]

How to install a custom front filter?

[@axonoxa]

Where to order sir

[@jheyser1234]

nice review again sir

[@deelangengania7369]

buti wala po syang vertical mount?

[@chockjoph9659]

Pasok kaya ang noctua nh-dh15?

[@sternnx]

Does this have a white version po sir marvin? Btw great content as always!!

[@loucipher7782]

*this or Alpha M?*

[@ricoswabe18]

So removing two thumb screws within 5 seconds is now an inconvenience? Nice preview though.

[@TechBroll]

hmm I did mentioned that if you remove the two screws underneath, the drive cage will also be detached. so imagine removing it like I did on the video with the case lying sideways, the drive cage will drop, unless you remove the screws from the bottom while the case is upside. which will require you to put the case like at the edge of the table or something like that.

[@ricoswabe18]

@@TechBroll i think the holes in the filter are big enough for the thumb screws not to be removed anymore. Otherwise, you can always make it bigger using scissors.

[@cloudivan1718]

Kasya ba d2 nhd15 at asus rog 2080 ti?

[@Christopherpototoy]

Hi Sir, kasama ba yung mounting screws para sa Mother board? Salamat! Lupit ng quality ng Vids nyu boss!

[@kirahideki6929]

Kasya kaya ung Corsair cx650m dito?

[@apmmasterpcapmmasterpc]

This case nice comes with 4 ARGB fan for 40 dollar and normal 4 fan for only 30 dollar .

[@adofatma2400]

Can i install 2 x 3.5" Hdd?

[@pinkipromise]

kuya your accent is soo good

[@billyftw_]

Can the front fit 140mm fans?

[@Yippeekayay.]

Yes, up to 2.

[@smokegames1179]

Ginahamit ko parin to case na to using a i7 12700 and 4070 super panay glass case na kase ngayon 😂