I am now the owner of this awesome GF-777. I love what you did with the lights and the new speakers are awesome!
@teddyhashee4 жыл бұрын
Thank you for your compliments on my work! Good for you to be a owner of GF-777.
@ellasfella12054 жыл бұрын
Hands down you are without a doubt the king of boombox and electronic restoration. God bless you and keep doing what you do. You should change your name to Teddy Midas because everything you touch turns to gold.
@teddyhashee4 жыл бұрын
NIce naming, thank you!
@mediaslave19655 жыл бұрын
I experienced a roller coaster of emotions watching this...It turned out just fine in the end...Thanks for the ride and returning me safely
@teddyhashee5 жыл бұрын
Thank you for riding the roller coaster with me! I am glad that you safely returned. LOL. Thank you for the comment!
@MAZ105-chan4 жыл бұрын
@@teddyhashee Perfect!
@r.msyiem2 жыл бұрын
Resurrected from the DEAD,repairing an old product is more challenging than making a new one you have a deep knowledge about this Japanese SHARP GF 777 its a Legend We had one of these in the 80s and now it's long gone cannot be repaired the technicians says,but I've seen the talent you have got GOOD LUCK.
@21whitman5 жыл бұрын
Wow, you really outdid yourself on this one. That is a ton of work. Terrific job Teddy
@teddyhashee5 жыл бұрын
Thank you for your compliment on my work! It was tough!
@phrayzar5 жыл бұрын
You are a very strong, skilled and persistent person. I appreciate your videos very much, thank you.
@teddyhashee5 жыл бұрын
Thank you for your compliment on my work!
@sonic2000gr5 жыл бұрын
Your skill, talent and patience is amazing! Well done.
@teddyhashee5 жыл бұрын
Thank you for your compliment!
@Havanacuba19854 жыл бұрын
Sir you are a great engineer. Congratulations
@teddyhashee4 жыл бұрын
Thank you for your compliment on my work!
@hesingoer59303 жыл бұрын
I had one of these...got it in the Navy in '86. It was SO BIG. I had a very good tech go crazy trying to fix it later...RIP.
@whalahiguy5 жыл бұрын
Wow, just... WOW. Watching your videos is watching a true master at work. Thank you for your dedication! Subscribed!!!
@teddyhashee5 жыл бұрын
Thank you Lew_Dawg for your compliment and subscription!
@RUSKAJACK2 жыл бұрын
Hi! Have the same device, a bit of a nightmare came up, while i was trying to change a belt to the deck 2. I put one 4 pin cable on the wrong spot (i know, my bad) and then both decks stopped working :( any ideas where i should start looking the problem ?? Already checked both of the fuses and they are Ok. The 2 pin yellow cable which leaves behind the deck buttons is power ? Might be the issue on it ? Radio still works but decks don´t.
@Pabloelectronico5 жыл бұрын
good job!!, also that you hurt your head to find the failure of the deck's, but it was worth the hours, time, perseverance and patience to go very well, in addition to the component speakers was much improved the bass. excellent work teddy. Greetings from Chile and also thanks for teaching to restore eighties stereos radios.
@teddyhashee5 жыл бұрын
Thank you for your compliment on my work. It was a long journey for me from the start to end of this restoration. But as you said, I learned many things from this one. There are tons of 80's monsters out there, and I hope many of them will be saved by someone;s hand!
@Bufferoverload.5 жыл бұрын
thank you TEDDY for another great video, perseverance payed off in the end and it was a great job again.
@teddyhashee5 жыл бұрын
Thank you for your compliment on my work!
@ouaichainimcharoen82775 жыл бұрын
@@teddyhashee ร้านอยู่ที่ไหน
@RaczBela19935 жыл бұрын
A Perfect Restoration! Looks fantastic👌 Greetings from Hungary
@teddyhashee5 жыл бұрын
Thank you for your compliment!
@johnpatrickfay52885 жыл бұрын
I love watching you work your magic sir.
@teddyhashee5 жыл бұрын
Thank you for your compliment.
@josefeowyn26143 жыл бұрын
This guy is a master of restoration of boombox what the heck teddy how do you do that!!!!!!!!!
@jaminator190e4 жыл бұрын
after the chassis was painted, how was the lettering put back for each switch and knob? definitly great work on this unit.
@yurigoryunov3 жыл бұрын
I would love to know that too - seems like an amazing job!
@robert58612 жыл бұрын
Just beautiful !!!! Ideal colors for a powerful ghetto blaster. i like your works!!!!! respect !!! I own a lasonic trc 931,since 1989 year, I should convert it like you🤩🤩🤩
@isaacbell24265 жыл бұрын
You are my electronics idol. Just amazing!!!
@teddyhashee5 жыл бұрын
Thank you for your compliment on my work!
@bobbygermano99265 жыл бұрын
LOVE this one Teddy!!. Q: do you find big diff with new speakers, & ever have clearance issue w big magnet. Have to rewatch on higher speed, missed painting of the face.
@teddyhashee5 жыл бұрын
Hi, Bobby. The original 6 speakers were contained with 2 heavy duty bass speakers in the center. When I tested sound with original speakers, the all range speaker was not so impressive, however, this bass tuned speakers were outstanding. After replacing the speakers to new one, I wanted to have more heavy bass sound like original one. Other than this, there was no problem for installing new one.
@driver_cl5 жыл бұрын
Great Job. Would like to know.. Why do you approach the de-magnetizer in the way you do to the heads ? thanks
@teddyhashee5 жыл бұрын
That's how I learned how to use De-magnetizer. From far away to the head, slowly movement, and never touch the head as well as metal around the head. Wave 4 to 5 times in front of the head, then move backward slowly in order not to damage the head by the strong magnetic force.
@codebeat41925 жыл бұрын
Nice, don't like the colors but this is a client request I guess. One question, you paint the surface however how did you restore the labels for knobs? In the 80's there where scratch-on letters but isn't available anymore. Any exposure possible to a 'secret' how to do this? Thanks for any answer about this.
@teddyhashee5 жыл бұрын
When the owner painted body, he also created labels by printing it onto the thin plastic and attached them. So the position of the labels were different from original position. So it wasn't good looking when you look them in closely. However, I saw another boombox that was done by the professional with using hydro dip painting method, it had all exact same labels transferred onto the body. I guess it was printed on the transferable sheet and put each of them as exactly same as original. Probably it costed more than a thousand just only hydro dipping and labels.
@XerxesLangrana Жыл бұрын
Fantastic work! I’d like to know what music you’re playing at the end from 1:28:07 onwards and for the sound test.
@malcolmbarker48625 жыл бұрын
Hi teddy it's a joy to watch you work man but I would have thought those vintage machines would need recapping
@teddyhashee5 жыл бұрын
I agree. Most of the time I do not replace the cap if both left and right sound level is normal. But if I replace the cap, the sound quality will jump up from good to GREAT. But I do not have time to work for each of them so far.
@gavincurtis5 жыл бұрын
Hell yeah... upgrade those tired speakers and I bet it sounds amazing now. Keep the old ones to put back when it goes to the museum.
@teddyhashee5 жыл бұрын
Thank you for the compliment. And yes I am keeping the old speakers with me!
@andreamattiello86015 жыл бұрын
Very Very Good job! Congratulations!!!
@teddyhashee4 жыл бұрын
Thank you for your compliment.
@diggerman33775 жыл бұрын
patience,experience, top job well done!
@teddyhashee5 жыл бұрын
Thank you for your compliment!
@OldSkoolF5 жыл бұрын
Ken Dovich had one in the 80's.... He used to play Quiet Riot every morning from the Back of the Bus... "BANG YOUR HEAD" !
@teddyhashee5 жыл бұрын
Thank you for the comment.
@videorage2 жыл бұрын
Great job! Where did you get the hardware for mounting the tweeters? I'd like to upgrade from the piezos in my GF-767.
@amiya192775 жыл бұрын
Amazing restoration....
@teddyhashee5 жыл бұрын
Thank you for your compliment on my work!
@rolliblusero5 жыл бұрын
Teddy Hashee, normalmente cuánto tiempo le dedicas al arreglo de un ejemplar tan escaso y bonito como ese, o lo haces por tiempos, un abrazo!
@teddyhashee5 жыл бұрын
for like this one, 40 hours average. Thank you for the comment.
@adrianfox94315 жыл бұрын
Excellent job as usual and very brave taking on that beast. Did you consider upgrading the power amplifier with a class-D to push those modern speakers harder?
@teddyhashee5 жыл бұрын
I did not replace the amp to the more powerful one this time, but in the future, I may do it!! Thank you for the suggestion.
@davidmoore23084 жыл бұрын
Hi great video do you own your own boombox which is your favourite.?
@stevecrash76333 жыл бұрын
Hi Teddy, I have same box but the tuner string is off the large wheel and small wheels I have no clue how to restring so I was wondering if you had any suggestions or videos?
@radiosiesta5 жыл бұрын
That's a great job. You have my admiration.
@teddyhashee5 жыл бұрын
Thank you for your compliment on my work!
@derekstorey58895 жыл бұрын
Teddy where did you learn your expertise?
@teddyhashee5 жыл бұрын
Learned from my own mistakes and a lot of try
@derekstorey58895 жыл бұрын
@@teddyhashee your work is amazing keeping boom boxes alive.preservation st its finest!
@bigoz1695 жыл бұрын
Great work. My pain was when my GF 777 was stolen from a few years ago after owning it for 15 years. If I ever get another I want you to restore it but I have one question weren't those woofers you put in too powerful for the unit if I recall from way back when I last opened mine all the speakers were 10 watts equaling out to 60 watts.
@teddyhashee5 жыл бұрын
Wow, sorry to hear that your GF was stolen. Hope you will get your GF777 again. About speaker, my opinion is definitely the original speaker is best much for this one. Tow center ones were for heavy base that will create more 3D sound, in my opinion.
@TunesRus5 жыл бұрын
Hi great work next can you tell me if the new speaker sound better then old one as might put them in my sharp gf 767 once again great job
@teddyhashee5 жыл бұрын
In my opinion, original is much better than new one.
@nicolaetuns5 жыл бұрын
One can only appreciate the amount of hours you pulled into this boombox! Excellent job Teddy! The muffled sound was very noticeable when you were playing cassettes - I guess there is some old and tired component in your pre-amp (before the tone-correction circuitry), most probably some capacitor. The thing is that the power amp (after aux) sounds much better when picking signal from AUX .. so it is definitely not the power amp but the pre-amp that muffles the sound .. regardless of the variation in motor speed, that is. In another of your videos I've seen you have a bunch of all kinds of belts .. where does one buy those belts? And where did you buy that sticky plate that you used to stiffen the case? What is that called in English?
@teddyhashee5 жыл бұрын
Hi, Nicolae. Thank you for the great input. Next time I may look into the pre-amp parts you mentioned whenever i have some muffled sound problem. Great input. The drive belts, I buy time to time from seller on ebay, or other online shop. I buy assorted belts set, mostly made in China. Some of them good, and some bad. Also I used to buy belts from Germany and it was a great quality one, but they suddenly stop selling belts. When it comes to the flat belt, there are sellers who are selling turntable needles, and they also have a different type of good quality flat belts. They will cost than assorted one, but works perfect. Finally, plastic bonder syringe like thisamzn.to/2XBJucr It will enforce the strangeness of the repaired parts. You can find many of them from many different company.
@nicolaetuns5 жыл бұрын
@@teddyhashee thank you for the information! I'll certainly look on Ebay for belts. Do you happen to know where I can buy a test tape? I looked for such a tape on Amazon and Ebay to no avail..
@teddyhashee5 жыл бұрын
I bought mine from here www.duplication.ca/audio-cassette-speed-calibration-test-tape.html Price is fair, but shipping is a little expansive though.
@rahimkvayath5 жыл бұрын
beautiful sharp, I would like to appreciate your hard work
@teddyhashee5 жыл бұрын
Thank you for your compliment on my work!
@andreamattiello86014 жыл бұрын
Hello, I always follow your work,congratulations You are very good. I'm restoring a Sharp gf 767 and I'd need some advice. I remade the rubber, the deck transmission wheels and changed the rubber straps, restored 2 springs and cleaned everything. When I start the 2 decks, they work for 3.4 seconds and then they stop,as if the tape is finished...how do you advise me to intervene ? Thank you!
@teddyhashee4 жыл бұрын
Probably auto-stop is kicking in. It means one of your reel is not spinning well when you play or FF/REW.
@andreamattiello86014 жыл бұрын
@@teddyhashee ,tank you my friend!
@Aleksey-19715 жыл бұрын
Как всегда увлекательное видео ! У меня есть 777 в идеальном состоянии, хороший аппарат.
@faraonaziz81565 жыл бұрын
добрый вечер,этот аппарат можно купить?у меня есть два шарпаGF7850 хочу 777aliexpresможно заказать.просто я фанат шарпов80х.
@teddyhashee5 жыл бұрын
Wow, GF-777 in perfect condition! I envy you!! Enjoy your great sound from 777!
@teddyhashee5 жыл бұрын
Thank you Fara on Aziz for the comment.Hope you will be able to find your own 777!
@tonys6235 жыл бұрын
I was wondering, do you think those small plastic parts could be replicated using a 3D printer?
@teddyhashee5 жыл бұрын
If you are talking about the white plastic parts for the FF and REW, I am not sure the 3 D printing parts would work as replacement. If I were you, I will try to duplicate it with 3D printing, then after that I would sand their surface down until to make it very smooth. It has to move as smoothly as possible.
@cosimoferraro10915 жыл бұрын
Very beautiful video radio Sharp
@teddyhashee5 жыл бұрын
Thank you for your compliment!
@djrajivtt3 жыл бұрын
how do you paint the face without painting the writing ?? PLEASE REPLY
@HERRYCHAN20045 жыл бұрын
完美嘅維修技巧~~我小時候都有一部sharp gf-999
@teddyhashee5 жыл бұрын
Thank you for your compliment!
@roelvelasquez84113 жыл бұрын
Awesome work. 👌
@manuelg.herrera41175 жыл бұрын
Excelent repair!
@teddyhashee5 жыл бұрын
Thank you for your compliment!
@johnvictor9604 жыл бұрын
Your skill very very very bestest!
@teddyhashee4 жыл бұрын
Thank you for your complement on my work.
@Gabypersan5 жыл бұрын
Increible!!!! Enhorabuena
@teddyhashee5 жыл бұрын
Thank you for your compliment on my work!
@everaldopereira40875 жыл бұрын
Amazing Job !
@teddyhashee5 жыл бұрын
Thank you for your compliment!
@nordin_gh5 жыл бұрын
Amazing job.
@teddyhashee5 жыл бұрын
Thank you!
@fox1210665 жыл бұрын
love watching your video
@teddyhashee5 жыл бұрын
Thank you!
@ramoncinsg2 жыл бұрын
1:29:48 Incredible moment... !!! You're the best.
@feruz33 жыл бұрын
You are the magic men!
@alexanderarroyo20005 жыл бұрын
Are you in New York? I have a Conion C-100F that needs some tuning up. Great work on the sharp and I just subscribed to your channel
@teddyhashee5 жыл бұрын
I am in zip 07605, if you need me to work with your c-100f, contact me through teddy.hashee@gmail.com Thank you!
@FeCr35 жыл бұрын
It always NEED much work/hours& nerves on a vintage device like this if it should play almost perfect again.... I spent a total of weeks in a row since i reparing things... :-/
@teddyhashee5 жыл бұрын
Thank you for the comment. You have been working on something right now! I am sending hearty cheers to you!
@johnnysmile014 жыл бұрын
This is amazing, such dedication, not for everyone it sure became a beautiful piece of ghetto blaster that aluminium sticker you used inside is for cooling? Thank you 👍
@fernando291134 жыл бұрын
Eso es tener paciencia en su labor......👍
@teddyhashee4 жыл бұрын
Thank you for your compliment.
@noarara37645 жыл бұрын
awesome job.
@teddyhashee5 жыл бұрын
Thank you for your compliment.
@TheNewYorkHustle3 жыл бұрын
Great work teddy. Are u a fellow new Yorker?
@danieldking5 жыл бұрын
Wow thats look amazing man nice work. If thats not retro i dont know that is dame nice thats awesome
@teddyhashee5 жыл бұрын
Thank you for your compliment!
@Stingray20064 жыл бұрын
I saw this video 3 times now...You did a heck of a job! I want to let you know that i may need you to work on my Gf 777...i will have it in two weeks...it has a few issues
@teddyhashee4 жыл бұрын
Thank you for your compliments on my work. But I am fully booked with restore work that I can accept new order right now.
@Stingray20064 жыл бұрын
@@teddyhashee ok ..no problem but can i email you with questions that could help to know what to do? Thank u
@daniellefko7095 жыл бұрын
Getto Blaster and very nice sounding stereo
@teddyhashee5 жыл бұрын
Thank you for the comment!
@jacar74635 жыл бұрын
Sos el mejor. amo tu trabajo.
@teddyhashee5 жыл бұрын
Thank you for your compliment!
@fransicorivas31415 жыл бұрын
Hey teddy another genius restoration WOW. Are these Sharp boombox problematic to fix I remember the other one you restored this one seemed like triple the work I wouldn't want to know what you charged for this one lol. Did the new speakers make a big difference in sound or are they just as good as the stock sharp. Great job
@teddyhashee5 жыл бұрын
The sound of the speaker, for me original bass speaker (2 of them in center) has much deeper sound than the new one. Those original bass woofers were tuned into especially heavy base. So I like original speakers sound, that's my honest opinion. Thank you for the great comment always!
@adrianfox94315 жыл бұрын
@@teddyhashee I think the modern speakers probably need more power to make them sound good?
@oscarflores19805 жыл бұрын
Yup! Those tape deck parts were so hard-headed.
@teddyhashee5 жыл бұрын
Thank you for the comment!
@oscarflores19805 жыл бұрын
@@teddyhashee Your welcome
@burhanuddinhaider5 жыл бұрын
Was just like when I spent 3 days on fixing my cousin's completely damaged amplifier.
@teddyhashee5 жыл бұрын
I understand how it was difficult for you to fix your cousin's boombox! thank you for the comment.
@catleaderk5 жыл бұрын
匠の精神がすごい!
@teddyhashee5 жыл бұрын
王さん、ほめて頂き感謝です。ありがとうございます。
@intelboydj12 жыл бұрын
Found this from our childhood, in Vasant Kunj
@javierarguelles90495 жыл бұрын
Excelente trabajo y que mejor, en un Sharp
@teddyhashee5 жыл бұрын
Thank you for your compliment!
@mesutisk7515 жыл бұрын
Gerçekten çok keyifli bir iş olmuş eline sağlık
@teddyhashee5 жыл бұрын
Thank you for your compliment on my work!
@bernardgentusa88407 ай бұрын
Bonjours pouvez vous me dire le nom du groupe de musiciens et la chanson merci
@arhamnadeem72624 жыл бұрын
Welldone amazing boss
@teddyhashee4 жыл бұрын
Thank you so much 😀
@michaelmishler7942 жыл бұрын
Do u have customer's and where are u located
@Stremyashisya5 жыл бұрын
Великолепно
@teddyhashee5 жыл бұрын
Thank you for your compliment!
@elmircoelho68495 жыл бұрын
Excelent
@teddyhashee5 жыл бұрын
Thank you!
@idieilik10694 жыл бұрын
Do you sell them restore?
@mr.e12203 жыл бұрын
What are these worth? Found one, but he wants $900
It is most difficult to find out what is the reason one channel has weak or almost no sound. You need to follow the signal from source to output, and need to pinpoint the cause. Take a time enjoy your restoration.
@Stingray20064 жыл бұрын
So then if you are booked up for the rest of the year, then what about in 2021? Or at least message me when you have an opening. Thank u
@teddyhashee4 жыл бұрын
Sorry that I could not answer you asap, but I am trying to sorting out and organizing what I can do for the requests.
@Stingray20064 жыл бұрын
@@teddyhashee its ok i know you are busy but i just want a chance for you to put me down for the year 2021...but i will wait for your reply whenever you are ready
@albano42675 жыл бұрын
Uau, very dificult, congratulations
@teddyhashee5 жыл бұрын
Thank you for your compliment on my work.
@edifierbass78215 жыл бұрын
Yess I would try to fix it but if it has a huge problem , I will not attempt or maybe I would scrap it for my new project; oh' by the way if those cassette players sound muffled try to adjust the Tape head, it has a significant screw with spring attached on it try to rotate it, there are two screws the other one is fixed while the other one for tone adjustment... enjoy
@teddyhashee5 жыл бұрын
Thank you Edifier for the valuable info. I do touch the head adjustment sometime to improve the sound quality. For this 777, there are another issue from painting. The painting of the whole body including the cassette door made slight change of the touch of the head, and that was unable to adjust. Anyway, next time if I need to do the 777 or similar one to restore, I try to adjust the head if it is possible. Thank you!
@edifierbass78215 жыл бұрын
@@teddyhashee Yess well you can paint it with acrylic car paint metallic , just give the spray paint one foot distance to it, so that the acrylic part will evaporate not melting the plastic
@teddyhashee5 жыл бұрын
Thank you for the great info!
@brasilradiosbomboxmusic57735 жыл бұрын
Sensacional! Gostaria de comprar um bombox desses !
@teddyhashee5 жыл бұрын
Thank you for the comment. Hope you will be able to find your own 777!
@giampierorusso6075 жыл бұрын
Whaooooooo...😨.Fantastc...it's Incredible you are a wizard. ...whaooo!!!!.👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏..!!!..👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍!!!😨!
@teddyhashee5 жыл бұрын
Thank you for your compliment on my work.
@ih8hoz4124 жыл бұрын
i Have this exact sharp 777 how can i go about getting mine repaired>
@teddyhashee4 жыл бұрын
How is your GF777 condition?
@ih8hoz4124 жыл бұрын
Teddy Hashee it seems to have the same problems as the one you fixed ive had it for awhile the tape deck use to run they run slow now . the radio use to play but will not pick channels. I don’t think it’s in poor condition but def a lot of wear and tear over the years
@ih8hoz4124 жыл бұрын
Teddy Hashee but it’s not the best either
@teddyhashee4 жыл бұрын
clean the all contact with contact cleaner, replace the drive belts to see how it change.
@ih8hoz4124 жыл бұрын
Teddy Hashee juys a question how long of a process to do this exact thing to mine that you did ?
@matthewdavid21255 жыл бұрын
What will you do with the old speakers
@teddyhashee5 жыл бұрын
I am keeping it for the next possible 777 restoration, or I can repair the broken speaker and use it for the another project such as creating the suitcase boombox from scratch. Thank you for the comment.
@matthewdavid21255 жыл бұрын
Ok cool I thaught you threw them away anyway do you service boom boxes for people
@teddyhashee5 жыл бұрын
Yes I do. If you are interested, send your email at teddy.hashee@gmail.com
@matthewdavid21255 жыл бұрын
Ok cool I just scored a torec super jumbo j 1
@manjunath-fu8fl5 жыл бұрын
Good job
@teddyhashee5 жыл бұрын
Thank you for your compliment on my work!
@manjunath-fu8fl5 жыл бұрын
Thank you sir
@manjunath-fu8fl5 жыл бұрын
I have sony vx 555 panasonic sa vk 950 national rx cw 55
@teddyhashee5 жыл бұрын
Great!!
@СергейМаркин-ъ7ь5 жыл бұрын
В юности я мечтал о таком магнитофоне))).Вот это ты по мучился дружище с кассетными деками))!!!.Вопрос,эти магнитофоны тебе приносят ремонтировать или ты сам ищешь ради интереса восстановления?С уважением из России!Молодец!
@teddyhashee5 жыл бұрын
Thank you for your comment. Hope you will get your own boombox from 80's and enjoy the music, feel the nostalgia again.
@СергейМаркин-ъ7ь5 жыл бұрын
@@teddyhashee Спасибо!У нас такие магнитолы-раритет,большая редкость,учитывая что уже сейчас просто выбрасывают DVD-player,не нужны.У меня есть живая магнитола JVC PC W-222,стояла на шкафу,пылилась,покупалась в 1997 году.Добавил просто AUX-вход,теперь слушаю интернет-радио.Успехов в дальнейших работах!
@patriotanumero15785 жыл бұрын
eres un maestro
@teddyhashee5 жыл бұрын
Thank you for your compliment!
@adrianlee3145 жыл бұрын
Super Duper Dope
@teddyhashee5 жыл бұрын
Thank you for your compliment on my work!
@ahmedakm60315 жыл бұрын
جمييييل .😘جدا .😍استمر انا من متابعين. 🤩
@teddyhashee5 жыл бұрын
Thank you for your compliment!
@nolbertohuamanandahua3555 Жыл бұрын
muy buen video yo tengo uno que me compre desarmado quisiera regresarlo a la vida como salio en sus años y ponerle esas luces color azul y Bluetooth para modernisarlo un poco lastima que estoy muy lejos Saludos desde Peru-Lima
@hongjinglaoshou4 жыл бұрын
压带轮要更换,喇叭不应该换。
@MrGaming175 жыл бұрын
Ils font combien de watts les sons
@teddyhashee5 жыл бұрын
Full range 4 watts x 2, and super woofer 3 watts x 2
@MrGaming175 жыл бұрын
Bizarrement j'ai vu 200 w sur le son que tu as remplacé
@bernardgentusa88407 ай бұрын
Bonjours j'ai le même radio cassette et les mêmes problèmes peut tu m'envoyer de l'aide bonjour chez vous.
@thegolfernment3 жыл бұрын
Hope I don’t have to work this hard for my $25 one
@sonidolacaoba47585 жыл бұрын
Hola sinceramente eres el mejor saludos stereo cassette desde austin texa