Teltonika FMB Immobilizer Scenario

This is our next video in FMB Advanced Configuration series. Here you can see how immobilizing helps to protect your vehicle, how all the installation has to be done and also required configuration setting.
More information:
teltonika.lt/
teltonika.lt/pr...

[@fabriceblesso6514]

hello I would like to know how to connect a fmb920 with a relay please thank you for your understanding.

[@TeltonikaTelematics]

Hello, Thank you for your comment! As every vehicle might have a specific connection with the relay, we would advise you to contact the nearest Teltonika office to help you resolve this enquiry. Find all Teltonika offices here: teltonika-gps.com/about-us/contacts

[@Abdoulayediallo]

Hello I have FMB140 and try to configure Immobilizer and i configure like this configuration of video. But with that configuration the vehicule start without identification. where i can find a support for that?? Thank you for advance...

[@tudorcasian8136]

does the imobiliser work without having an ibutton? i want to turn the imobiliser on and off via sms so the car cant be stolen when parked for long time. when i need to use it i plan to turn the imobiliser off via sms comand. it is a personal car and i dont want to add an ibutton to the configuration

[@TeltonikaTelematics]

Sure, you can control the DOUT with SMS/GPRS command. Please check the user manual for "setdigout" command.

[@Orlandosigut]

I don't see anywhere how I can control the location of the vehicle on a map, it's possible?

[@instalador1securita770]

Hola, tengo que instalar unos equipos FMC920 con el apagado remoto, cual seria el comando para que se apague el vehiculo remotamente por medio de plataforma ?

[@TeltonikaTelematics]

Hello! Thank you for your question. While the FMC920 has functionalities for various scenarios, it does not directly turn off the vehicle remotely via a platform using the Immobilizer. For your requirement, you might want to consider using the SECO (secure vehicle disabling) functionality. This allows you to remotely disable the vehicle under certain conditions. You can read more about this functionality on our wiki page: wiki.teltonika-gps.com/view/Secure_vehicle_disabling

[@Kopsir]

But a thief can bypass the ignition switch and start the vehicle, right? because when key is out, relay is off

[@DedeVezis]

but the relay is the only way to start the starter since the starter control cable is cut off.

[@Kopsir]

@@DedeVezis So the relay has to be hidden somewhere ?

[@DedeVezis]

@Kopsir well it certainly should be out of eyesight

[@leonardurbainassi550]

technically, what is the configuration to adopt with the relay to activate the immobilizer without using a dallas key? Also, what would be the syntax of the sms command to send to the FMB 120 unit?

[@TeltonikaTelematics]

Hello, you can control immobilizer relay by simply activating DOUT via SMS/GPRS command "setdigout". For the syntex, please refer to our wiki: wiki.teltonika-gps.com/view/FMB_setdigout

[@nancynyatigo4336]

Hello. We are having problems with fmb920 immobilizer the vehicle can randomly go off due to the relay. What could we be doing wrong? Do you have a relay installation video for the same model? Thanks.

[@TeltonikaTelematics]

Hello Nancy, relay connection logic is the same for all of our trackers with digital output. In case you need more info, please contact the salesperson.

[@jacqueskiyombo7081]

Can I use relay that did not come with teltonika?

[@TeltonikaTelematics]

Hello! Thank you for your question! Yes, it is possible. The relay must work according to the voltage of the vehicle (12 or 24 voltage).

[@ousmanenoahtraore330]

Hello, please can you send me the engine stop scheme and the commands

[@TeltonikaTelematics]

Dear Ousmane Noah Traoré, This can be achieved using relay and Digital Output to stop fuel pump in the vehicle. For a detailed answer please contact Teltonika sales representative via Contact us button in our page - teltonika-gps.com/ or find the information in our community forum - community.teltonika.lt/