TenarisBayCity seamless pipe manufacturing process

[@Chipculv666]

These folks really have their process down. Much respect.

[@suheladesilva2933]

Great video and brilliant animations. Thanks a lot.

[@boraboy4ever]

Wow. This videos makes me want to work for Tenaris

[@mayurlad540]

Well organised and best automation in Pipe line

[@woshi6mang]

Where are you based Mayur? We are hiring and based in Vancouver BC, Canada.

[@brlkwski]

Seamless pipe was made in National Tube works in McKeesport ,Pa. in the 1900. The mill has since closed but made pipe till the 1980"s .

[@hotdoggravy]

I worked for 10 years at tenaris in the sault, heat treatment department.

[@khairuldollmat8616]

Thanks. Very informative indeed. Are the steps going to be same for different materials (i.e. CS, SS304, Inconel 625, etc)?

[@robertmbernhardtjr953]

SS 304 AND INCONEL VERY HARD MATERIAL MAY NEED EXTRA STEPS

[@clintg3435]

Sorry, was thinking of monel.

[@divermike8943]

How does that boring mandrel aka piercing tool come out once the solid bar is forced onto it? And I imagine that the piercing tool must be fixed at the other end and must be longer than the tube/pipe. Otherwise, how is it supported?

[@milkdrinker7]

The way I'd do it is to cut the pipe off once it gets long enough, then rotate the pipe+piercing tool out of alignment with the incoming bar so that the hot pipe can then be slid off the same direction it slid on. Otherwise yeah it would have to be held in place with some crazy magnet contraption that, realistically, no way they would actually use.

[@prototype8861]

Very hard work.

[@CurtisEspindola]

This is a good video！

[@HunanGreatSteelPipeCoLtd]

Professional and efficient

[@mayurlad540]

How to apply for job for your company? I have 3 year experience in Seamless pipe manufacturing line in making of SS pipe and tube. I want to join your company Can you please tell me the process

[@azizazhar]

great video

[@gstkhu]

good video！

[@angbuilder9019]

Good video

[@lktrffcnbvcxse]

nice！

[@Mr20theprophet]

This plant is night and day from there Koppel PA plant. 😂

[@mayurireddy8196]

Steel pipes manufacturers

[@hindu12259]

Pipe must be cost $500/piece😳

[@joshbrown7986]

500$??? Hahahahah try 3,000$ a piece

[@WuxiHaowangSteelCo]

Not as big as our factory

[@joelsalinas30]

Like si te chaqueteaste

[@prestonevans4327]

With the amount of timber you use on deliveries. You can't possibly say minimum environmental impact.

[@Yusa9204]

At the bar mill where I once worked we established a program of recycling wood from incoming trucks and cars into outbound shipments. We saved much money and wood.

[@markrainford1219]

Wood literally grows on trees. More trees are planted than are cut down. The wood will be recycled one way or another.

[@diogomachadosouza]

tudo mentira

[@ariefsyahrizalu3842]

In what context?