I find having auto control of ball direction counter intuitive to what the purpose of the machine is for. I.e. drilling the same type of shot again and again.
@doremisol47604 жыл бұрын
Glad to see your nice diy ball machine.
@mattharvey87123 ай бұрын
Bravo......clever........now make adjustable ball size........speed on each wheel......maybe third wheel......cheers
@michaelmariti99915 күн бұрын
Great machine! Can you make a video tutorial on how to build this?
@Swenser4 ай бұрын
I too am trying horizontal mount. Im working on ball hopper mechanism now and think ball jams is the hardest thing to contend with. No.2 I found it hard to find matching wheels and couplers but eventually is ok. Thats the two hardest things i think.
@aggelosa32834 жыл бұрын
Hi, great job on the quality of the construction. I'm currently working on my own (vertical orientation) and I would like to have more info on the material of the wheels and how did you balanced them so well. Also what kind of motor coupling did you use?
@balapadmanabhan10854 жыл бұрын
The wheels are custom made of nylon rod and then I had a cobbler stick a 8 mm rubber sole over it
@andreasrist95785 жыл бұрын
Hi, cool machine. Where did you buy the wheels?
@avataronline90375 жыл бұрын
Before getting this far with the current wheel . I tried at least 10 different materials and sizes. The wheel was custom made . Just wanted to know if you tried any wheels available in the market so far. At what stage are you with this project? I will surely help you out; so that you don't have to go through the same trouble.
@Swenser3 ай бұрын
Also wondering what happens before switch on when there is a ball already sitting at spinning wheels. I'm guessing the only solution is manual removal of the ball, right?
@arsenasaturyan35065 жыл бұрын
Hey, nice project. I have one point, why did you put wheels on the side of the ball? you won't be able to do top and back spins
@balapadmanabhan10855 жыл бұрын
My newer model has a vertical orientation . Thanks for the observation. Do you have one that you are working on?
@analopes-rk2bs Жыл бұрын
Hi, great project. I am trying to make one but I am struggling. are you sharing the project? selling a propotype? tutorial? i am very interested. thanks
@michaelcarron31365 жыл бұрын
What motor did you use and where did you get it? Starting a project similar to this and looking for help
@balapadmanabhan10855 жыл бұрын
Mike the motor is from amp flow and is available online. I don't now which country you are from to point to a dealer . Let me know, Willing to help an ethuasiastic builder.
@balapadmanabhan10852 жыл бұрын
@NAVIN TURKAR Navin the motor is from Amazon USA .the brand name is AMP flow. You can see the model number in the video as well. Amp flow 300
@176pawel5 жыл бұрын
Can I know the model of motors ? And maybe where did you buy it?
@wfrasson005 жыл бұрын
Hi!! Could you send more information for example the settings of the wheels and the motors the link where you bought the two? Thank you so much
@avataronline90375 жыл бұрын
The motor is from amp flow.In this version the wheel size is 2.5 inch x 5.5 inch with center curvature
@EyesOfTheInternet5 жыл бұрын
What speed controller are you using for the motors?
@avataronline90375 жыл бұрын
The speed controller is from Amazon
@BillStArnaud Жыл бұрын
Any chance you can provide schematics, wiring diagrams,etc?
@wfrasson005 жыл бұрын
Hi which material used for wheels? Thank ou so much.
@avataronline90375 жыл бұрын
The wheels were custom made. Please send me your email address and I can send you more details
@wfrasson005 жыл бұрын
Hi wfrasson@gmail.com thank you so much
@EyesOfTheInternet4 жыл бұрын
How many MPH can it send a tennis ball?
@satyaprasad3695 жыл бұрын
How did you connect your wheels to the motor? Can you provide part no for the shaft adapter?
@avataronline90375 жыл бұрын
I had a shaft made to my required size by lathe
@satyaprasad3695 жыл бұрын
@@avataronline9037 can you please provide information about the wheel and the shaft sleeve you are using?
@avataronline90375 жыл бұрын
@@satyaprasad369 The wheels are made of silicon rods lathe to size with curvature in the center. Below are some pics. For more details send me your WhatsApp number
@avataronline90375 жыл бұрын
@@satyaprasad369 In this version 2 the wheel size is 2.5 inch thick x 5.5 inch diameter with center curvature
@giulioghisu5 жыл бұрын
Watts of motors?
@avataronline90375 жыл бұрын
The maximum power is 1580 watts and the minimum voltage is 12V DC with max of 30 V DC
@Swenser4 ай бұрын
@@avataronline9037continuous power will be about 150 to 200 watts of those motors.
@fouedmelki67665 жыл бұрын
how did you get this two rotate ?
@avataronline90375 жыл бұрын
If you are referring to the two driver wheels. They are driven by the two motors
@fouedmelki67665 жыл бұрын
@@avataronline9037 give me information about this two motors and the jack up to down and the website where you get them from plz
@avataronline90375 жыл бұрын
@@fouedmelki6766 I can provide you more info . Do you have a whatsapp number. If so provide
@fouedmelki67665 жыл бұрын
@@avataronline9037 ok this is '56801824'
@avataronline90375 жыл бұрын
@@fouedmelki6766 I need country code also
@avataronline90375 жыл бұрын
Check out the tennis Guru 1.0 in action at the tennis court . kzbin.info/www/bejne/bJfaqHmVqtqqa8U
@coolmzx4 жыл бұрын
i need the wheel,but i cannot find it,please htell me ,thank you very mach!
@balapadmanabhan10854 жыл бұрын
The wheels were custom made by lathe using nylon rods
@balapadmanabhan10852 жыл бұрын
I can make it and send if you need it
@felipe-muniz5 жыл бұрын
What the model of motors?
@avataronline90375 жыл бұрын
Amp flow
@avataronline90375 жыл бұрын
I used Ampflow E30-400 in my project
@analopes-rk2bs Жыл бұрын
hey, trying to build one similar. any chance you could help me? whatsapp? thanks